Home › General › NEW FEATURES [2017/08 Update] › NEW FEATURES › from 2017.08
NM2660E _V1 General _066520 NEW FEATURES [2017/08 Update] _0324323 NEW FEATURES UN GENERAL/CONTROL/DETAILS F

NEW FEATURES [2017/08 Update]  NEW FEATURES  GENERAL/CONTROL/DETAILS  3UR-FE ENGINE  


DESCRIPTION


a.

The air injection control has been adopted.*

HINT:

*: Models with EURO 4




FEATURES OF 3UR-FE ENGINE


a.

The 3UR-FE engine has achieved the following performance through the use of the items listed below.

(1) High performance and reliability

(2) Low noise and vibration

(3) Lightweight and compact design

(4) Good serviceability

(5) Clean emissions and fuel economy


Item (1) (2) (3) (4) (5)
Engine Proper A taper squish shape is used for the combustion chamber. ○ - - - ○
An aluminum alloy cylinder block sub-assembly containing a water distribution pathway is used. ○ - ○ - -
Spiny-type liners are used in the cylinder bores. ○ - ○ - -
Water jacket spacers are used. ○ - - - -
The piston skirt is coated with resin. ○ ○ - - ○
An oil pan sub-assembly made of aluminum alloy is used. ○ ○ ○ - -
Valve Mechanism Timing chains and chain tensioners are used. ○ - ○ - -
Valve lash adjuster assemblies are used. ○ ○ - ○ ○
Valve rocker arm sub-assemblies are used. ○ - - - ○
Lubrication System An oil filter with a replaceable element is used. - - - ○ -
A water-cooled type oil cooler assembly is used. ○ - - - -
Cooling System TOYOTA Genuine Super Long Life Coolant (SLLC) is used. - - - ○ -
Intake and Exhaust System A link-less type throttle body is used. ○ - ○ - -
An intake manifold made of plastic is used. ○ - ○ - -
Stainless steel exhaust manifolds are used. ○ - ○ - ○
Ceramic type Three-Way Catalytic converters (TWCs) are used. - - - - ○
Fuel System 12-hole type fuel injector assemblies are used to improve the atomization of fuel. ○ - - - ○
Ignition System The Direct Ignition System (DIS) makes ignition timing adjustment unnecessary. ○ - - ○ ○
Long-reach type iridium-tipped spark plugs are used. ○ - ○ ○
Charging System A segment conductor type generator assembly is used. ○ - ○ - -
Starting System A planetary reduction type starter assembly is used. - - ○ - -
Serpentine Belt Drive System A serpentine belt drive system is used. - - ○ ○ -
Blowby Gas Ventilation System A separator case is provided between the cylinder block sub-assembly and the intake manifold. ○ - - - ○
Engine Control System Magnetic Resistance Element (MRE) type crank position, cam position, and VVT sensors are used. ○ - - - -
The Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ - - - ○
The dual Variable Valve Timing-intelligent (VVT-i) system is used. ○ - - - ○
The Acoustic Control Induction System (ACIS) is used. ○ - - - ○
An air injection system is used.* - - - - ○
The starter control (cranking hold function) is used. ○ - - - -
An evaporative emission control system is used. - - - - ○

HINT:

*: Models with EURO 4




ENGINE PROPER


a.

Cylinder Head

i.

An air injection port is provided for the air injection control.

W128371C03
0.115,0.313 3.51,2.885 3.396,2.573 3.646,0.313 7.042,2.885 3.396,2.573 0.115,3.135 4.729,5.615 4.615,2.479 1.01,1.5 0.479,1.167 0.479,1.167 0.375,1.167 true 1.135,1.656 0.375,1.656 true 1.031,1.802 0.51,2.365 0.51,2.365 0.385,2.365 true 6.24,1.104 6.417,0.583 6.417,0.583 6.521,0.583 true 0.781,4.552 1.063,3.667 1.063,3.667 1.365,4.552 true 1.948,4.542 2.229,3.656 2.229,3.656 2.531,4.542 true 1.208,0.5 1.365,0.656 0.156,0.156 10 false A 1.208,2.469 1.365,2.625 0.156,0.156 10 false A 0.198,1.073 0.417,1.281 0.219,0.208 10 false *1 0.198,1.563 0.396,1.792 0.198,0.229 10 false *2 0.198,2.271 0.417,2.479 0.219,0.208 10 false *3 0.167,0.344 0.385,0.552 0.219,0.208 10 false *a 3.677,0.344 3.896,0.552 0.219,0.208 10 false *b 6.552,0.5 6.771,0.708 0.219,0.208 10 false *4 0.156,3.177 0.375,3.385 0.219,0.208 10 false *c 1.906,0.677 2.125,0.885 0.219,0.208 10 false *d 1,3.448 1.479,3.656 0.479,0.208 10 false *5 (*A) 3.875,4.448 4.094,4.656 0.219,0.208 10 false *f 1.906,2.24 2.125,2.448 0.219,0.208 10 false *e 6.552,1.354 6.771,1.563 0.219,0.208 10 false *d 3.979,2.083 4.198,2.292 0.219,0.208 10 false *e 2.156,3.448 2.635,3.656 0.479,0.208 10 false *5 (*A)
*A Models with Air Injection Control - -
*1 Intake Valve *2 Spark Plug Hole
*3 Exhaust Valve *4 Camshaft Housing
*5 Air Injection Port - -
*a Bottom Side View *b A - A Cross Section
*c Exhaust Side View *d Intake Side
*e Exhaust Side *f Front





INTAKE AND EXHAUST SYSTEM


a.

Exhaust Manifold

i.

Air injection pipes are provided for the exhaust manifold sub-assembly RH and LH.*

HINT:

*: Models with air injection control


Models with Air Injection Control
W131166C02
1.302,2.198 0.844,1.917 0.844,1.917 0.698,1.917 true 2.833,3.24 1.792,4.688 1.792,4.688 1.656,4.688 true 3.094,5.698 3.229,5.698 3.229,5.698 4.063,3.948 true 4.771,3.729 5.615,2.135 5.615,2.135 5.75,2.135 true 5.969,4.792 6.333,4.135 6.333,4.135 6.458,4.135 true 3.25,2.969 4.115,1.208 4.115,1.208 4.24,1.208 true 0.51,1.823 0.698,2.063 0.188,0.24 10 false *1 1.479,4.594 1.667,4.885 0.188,0.292 10 false *2 2.906,5.604 3.083,5.854 0.177,0.25 10 false *3 5.792,2.052 6.104,2.292 0.313,0.24 10 false *5 6.5,4.052 6.813,4.208 0.313,0.156 10 false *4 0.75,0.396 1.063,0.594 0.313,0.198 10 false *a 1.469,0.469 1.781,0.646 0.313,0.177 10 false *b 5.063,5.281 5.375,5.479 0.313,0.198 10 false *c 5.76,5.573 6.073,5.771 0.313,0.198 10 false *d 4.281,1.115 4.594,1.271 0.313,0.156 10 false *5
*1 No. 1 Exhaust Manifold Heat Insulator *2 Exhaust Manifold Sub-assembly RH
*3 Exhaust Manifold Sub-assembly LH *4 No. 2 Exhaust Manifold Heat Insulator
*5 Air Injection Pipe - -
*a Heat Insulator Tightened Area Cross Section *b Floating Construction
*c Heat Insulator Cross Section *d Corrugated





ENGINE CONTROL SYSTEM


a.

General

i.

The engine control system of the 3UR-FE engine has the following features.

System Outline
Sequential Multiport Fuel Injection (SFI)
·

An L-type EFI system directly detects the intake air mass using a hot wire type intake mass air flow meter sub-assembly.

·

An independent injection system (in which fuel is injected once into each intake port for each 2 revolutions of the crankshaft) is used.

·

Fuel injection takes 2 forms:

-

Synchronous injection, in which injection always occurs at the same timing relative to the firing order.

-

Non-synchronous injection in which injection is effected regardless of the crankshaft angle.


·

Synchronous injection is further divided into group injection during a cold start, and independent injection after the engine is started.


Electronic Spark Advance (ESA)
·

Ignition timing is determined by the ECM based on signals from various sensors. The ECM corrects ignition timing in response to engine knocking.

·

This system selects the optimal ignition timing in accordance with the signals received from the sensors and sends the (IGT) ignition signal to the igniter.


Electronic Throttle Control System-intelligent (ETCS-i) Optimally controls the throttle valve opening in accordance with the amount of accelerator pedal effort and the condition of the engine and the vehicle.
Dual Variable Valve Timing-intelligent (VVT-i) Controls the intake and exhaust camshafts to optimal valve timing in accordance with the engine operating conditions.
Acoustic Control Induction System (ACIS) The intake air passages are switched based on engine speed and throttle valve opening angle to provide high performance in all engine speed ranges.
Fuel Pump Control
·

Based on signals from the ECM, the fuel pump ECU controls the fuel pump speed.

·

The fuel pump is stopped when the SRS airbag is deployed in a frontal, side, or side rear collision.


Air Injection Control* The ECM controls the air injection time based on the signals from the crank position sensor, engine coolant temperature sensor, intake mass air flow meter sub-assembly and air pressure sensor.
Starter Control (Cranking Hold Function) Once the engine switch is pushed, while the brake pedal is depressed, this control continues to operate the starter until the engine started.
Air Fuel Ratio Sensor and Oxygen Sensor Heater Control Maintains the temperature of the air fuel ratio sensors or oxygen sensors at an appropriate level to increase the detection accuracy of the exhaust gas oxygen concentration.
Air Conditioning Cut-off Control By turning the air conditioning compressor on or off in accordance with the engine condition, drivability is maintained.
Evaporative Emission Control The ECM controls the purge flow of evaporative emission (HC) in the charcoal canister assembly in accordance with the engine conditions.
Engine Immobiliser Prohibits fuel delivery and ignition if an attempt is made to start the engine with an invalid key.
Brake Override System The driving torque is restricted when both the accelerator and brake pedals are depressed. (For the Activation Conditions and Inspection Method, refer to the repair manual.)
Diagnosis When the ECM detects a malfunction, it records the malfunction and memorizes information related to the fault.
Fail-safe When the ECM detects a malfunction, it stops or controls the engine according to the data already stored in the memory.

HINT:

*: Models with EURO 4




b.

Construction

i.

The configuration of the engine control system is as shown in the following chart.

W137330E01
0.479,0.115 2.24,0.885 1.76,0.771 10 false Intake Mass Air Flow Meter Sub-assembly 0.385,1.146 2.344,1.49 1.958,0.344 10 false Intake Air Temperature Sensor 0.604,1.771 2.125,2.115 1.521,0.344 10 false Crank Position Sensor 0.656,2.385 2.052,2.74 1.396,0.354 10 false Cam Position Sensor 0.24,3 2.406,3.76 2.167,0.76 10 false E.F.I. Engine Coolant Temperature Sensor 0.188,4.042 2.458,4.396 2.271,0.354 10 false Accelerator Pedal Sensor Assembly 0.563,4.656 2.115,5.01 1.552,0.354 10 false Throttle Position Sensor 0.625,5.271 2.115,5.635 1.49,0.365 10 false Knock Control Sensor 0.76,5.792 1.979,6.146 1.219,0.354 10 false Bank 1, Sensor 1 0.76,6.219 1.979,6.573 1.219,0.354 10 false Bank 1, Sensor 2 0.76,6.635 1.979,6.99 1.219,0.354 10 false Bank 2, Sensor 1 0.76,7.052 1.979,7.406 1.219,0.354 10 false Bank 2, Sensor 2 0.333,7.781 2.344,8.146 2.01,0.365 10 false VVT Sensors (Intake Camshaft) 0.271,8.406 2.438,8.771 2.167,0.365 10 false VVT Sensors (Exhaust Camshaft) 3.438,3.604 3.865,4 0.427,0.396 10 false ECM 5.771,0.125 6.188,0.406 0.417,0.281 10 false SFI 5.208,0.635 6.781,0.979 1.573,0.344 10 false No. 1 Injector Assembly 5.208,1.052 6.781,1.396 1.573,0.344 10 false No. 2 Injector Assembly 5.208,1.469 6.781,1.813 1.573,0.344 10 false No. 3 Injector Assembly 5.208,1.885 6.781,2.229 1.573,0.344 10 false No. 4 Injector Assembly 5.208,2.302 6.781,2.646 1.573,0.344 10 false No. 5 Injector Assembly 5.208,2.719 6.781,3.063 1.573,0.344 10 false No. 6 Injector Assembly 5.208,3.146 6.781,3.49 1.573,0.344 10 false No. 7 Injector Assembly 5.208,3.563 6.781,3.906 1.573,0.344 10 false No. 8 Injector Assembly 5.76,4.198 6.219,4.469 0.458,0.271 10 false ESA 5.156,4.677 6.573,5.042 1.417,0.365 10 false Ignition Coil Assembly 5.417,5.094 6.427,5.458 1.01,0.365 10 false No. 1, 4, 6, 7 5.156,5.646 6.573,6.01 1.417,0.365 10 false Ignition Coil Assembly 5.417,6.063 6.427,6.427 1.01,0.365 10 false No. 2, 3, 5, 8 4.969,6.729 5.708,7.094 0.74,0.365 10 false Spark Plug 5.979,6.729 6.719,7.094 0.74,0.365 10 false Spark Plug 4.896,7.146 5.781,7.51 0.885,0.365 10 false No. 1, 4, 6, 7 5.896,7.146 6.76,7.51 0.865,0.365 10 false No. 2, 3, 5, 8 5.677,7.792 6.26,8.104 0.583,0.313 10 false ETCS-i 5.25,8.292 6.688,8.646 1.438,0.354 10 false Throttle Control Motor

W137331E01
0.438,0.146 2.333,0.49 1.896,0.344 10 false Stop Light Switch Assembly 0.406,1.281 2.354,1.646 1.948,0.365 10 false Air Pressure Sensor (Bank 1) 0.406,2.427 2.354,2.792 1.948,0.365 10 false Air Pressure Sensor (Bank 2) 0.677,3.563 2.073,3.917 1.396,0.354 10 false Generator Assembly 0.208,4.688 2.448,5.052 2.24,0.365 10 false Power Steering Oil Pressure Sensor 0.438,5.792 2.26,6.542 1.823,0.75 10 false Park/Neutral Position Switch Assembly 0.375,6.646 1.927,7 1.552,0.354 10 false - Neutral Start Signal 0.375,7.031 2.198,7.396 1.823,0.365 10 false - Shift Lever Position Signal 0.427,8.125 2.25,8.49 1.823,0.365 10 false Transmission Control Switch 2.74,3.865 3.063,4.167 0.323,0.302 10 false LIN 3.427,3.438 3.865,3.833 0.438,0.396 10 false ECM 5.51,0.146 6.458,0.49 0.948,0.344 10 false VVT-i (Intake) 5.031,0.667 6.885,1.438 1.854,0.771 10 false Cam Timing Oil Control Valve Assembly RH 5.031,1.635 6.885,2.406 1.854,0.771 10 false Cam Timing Oil Control Valve Assembly LH 5.469,2.667 6.552,3.01 1.083,0.344 10 false VVT-i (Exhaust) 5.031,3.188 6.885,3.958 1.854,0.771 10 false Cam Timing Oil Control Valve Assembly RH 5.031,4.156 6.885,4.927 1.854,0.771 10 false Cam Timing Oil Control Valve Assembly LH 5.708,5.24 6.156,5.531 0.448,0.292 10 false ACIS 5.729,5.76 6.188,6.104 0.458,0.344 10 false VSV 5.313,6.417 6.625,6.771 1.313,0.354 10 false Fuel Pump Control 5.229,6.938 6.698,7.292 1.469,0.354 10 false Circuit Opening Relay 5.177,7.573 6.719,7.927 1.542,0.354 10 false Fuel Pump Control ECU 5.573,8.198 6.375,8.552 0.802,0.354 10 false Fuel Pump

W137332E01
2.458,6.156 2.594,6.156 2.594,6.156 2.802,5.844 false 0.656,0.125 2.167,0.448 1.51,0.323 10 false Air Fuel Ratio Sensor 0.708,0.635 2.083,0.99 1.375,0.354 10 false (Bank 1, Sensor 1) 0.708,1.052 2.083,1.406 1.375,0.354 10 false (Bank 2, Sensor 1) 0.813,1.76 1.969,2.094 1.156,0.333 10 false Oxygen Sensor 0.708,2.281 2.083,2.635 1.375,0.354 10 false (Bank 1, Sensor 2) 0.708,2.708 2.083,3.063 1.375,0.354 10 false (Bank 2, Sensor 2) 0.417,3.427 2.25,4.156 1.833,0.729 10 false Integration Control and Panel Assembly 0.479,4.417 2.24,4.771 1.76,0.354 10 false Cruise Control Main Switch 0.615,5.021 2.135,5.375 1.521,0.354 10 false Immobiliser Code ECU 0.167,5.615 2.469,5.979 2.302,0.365 10 false Transmission Control ECU Assembly 1,6.521 1.729,6.865 0.729,0.344 10 false EFI Relay 1.063,7.135 1.646,7.49 0.583,0.354 10 false Battery 1,7.719 1.729,8.063 0.729,0.344 10 false IG2 Relay 5.25,0.115 6.563,0.469 1.313,0.354 10 false Air Injection Control* 5.031,0.625 6.656,1.406 1.625,0.781 10 false Air Injection Control Driver (Bank 1)* 4.896,1.667 6.771,2.448 1.875,0.781 10 false Air Switching Valve Assembly (Bank 1)* 4.896,2.656 6.75,3.021 1.854,0.365 10 false Air Pump Assembly (Bank 1)* 5.031,3.26 6.656,4.042 1.625,0.781 10 false Air Injection Control Driver (Bank 2)* 4.896,4.313 6.771,5.094 1.875,0.781 10 false Air Switching Valve Assembly (Bank 2)* 4.896,5.292 6.75,5.656 1.854,0.365 10 false Air Pump Assembly (Bank 2)* 4.99,7.094 6.823,7.458 1.833,0.365 10 false Evaporative Emission Control 5.521,7.615 6.354,7.948 0.833,0.333 10 false Purge VSV 1.063,6.063 2.448,6.448 1.385,0.385 10 false CAN (Powertrain Bus) 3.427,3.135 3.813,3.417 0.385,0.281 10 false ECM 0.115,8.375 2.396,8.771 2.281,0.396 10 false *: Models with Air Injection Control

W137334E01
1.125,0.167 1.615,0.51 0.49,0.344 10 false DLC3 0.042,0.927 1.042,1.281 1,0.354 10 false CAN (Diag Bus) 1.573,0.948 1.802,1.156 0.229,0.208 10 false *1 2.385,0.896 2.563,1.125 0.177,0.229 10 false *2 0.563,1.417 2.208,1.76 1.646,0.344 10 false Network Gateway ECU*1 0.427,2.51 2.333,2.844 1.906,0.333 10 false Combination Meter Assembly 0.646,3.031 2.073,3.354 1.427,0.323 10 false Vehicle Speed Signal 0.5,4.188 2.208,4.521 1.708,0.333 10 false 4 Wheel Drive Control ECU 0.208,5.24 2.448,5.646 2.24,0.406 10 false Air Conditioning Amplifier Assembly 0.563,6.313 2.188,6.625 1.625,0.313 10 false Airbag Sensor Assembly 3.219,7.531 4.375,7.917 1.156,0.385 10 false CAN (V1 Bus) 0.208,7.771 2.802,8.146 2.594,0.375 10 false *1: Models with Network Gateway ECU 0.208,8.198 3,8.583 2.792,0.385 10 false *2: Models without Network Gateway ECU 3.427,2.854 3.854,3.302 0.427,0.448 10 false ECM 4.823,0.125 6.969,0.813 2.146,0.688 10 false Air Fuel Ratio Sensor and Oxygen Sensor Heater Control 5.042,1.052 6.896,1.375 1.854,0.323 10 false Air Fuel Ratio Sensor Heater 5.365,1.479 6.646,1.813 1.281,0.333 10 false (Bank 1, Sensor 1) 5.365,1.906 6.646,2.24 1.281,0.333 10 false (Bank 2, Sensor 1) 5.365,2.854 6.646,3.188 1.281,0.333 10 false (Bank 1, Sensor 2) 5.365,3.26 6.646,3.594 1.281,0.333 10 false (Bank 2, Sensor 2) 5.438,2.448 6.552,2.76 1.115,0.313 10 false Oxygen Sensor 5.438,4.125 6.479,4.438 1.042,0.313 10 false Starter Control 5.115,4.656 6.833,5.01 1.719,0.354 10 false Smart Key ECU Assembly 4.917,5.292 6.719,6.031 1.802,0.74 10 false Park/Neutral Position Switch Assembly 5.094,6.323 6.625,6.635 1.531,0.313 10 false Starter Relay Assembly 5.573,6.969 6.385,7.281 0.813,0.313 10 false ACC Relay



c.

Layout of Main Components

Models with Air Injection Control
W137333C01
5.76,2.948 5.625,2.948 5.625,2.948 4.427,1.677 true 4.802,0.292 4.635,0.292 4.635,0.292 3.552,1.635 true 2.323,0.24 2.448,0.24 2.448,0.24 3.354,1.635 true 1.271,1.083 1.406,1.083 1.406,1.083 2.271,2.427 true 1.719,3.417 1.865,3.417 1.865,3.417 2.552,2.542 true 2.146,0.146 2.458,0.302 0.313,0.156 10 false *1 1.104,0.99 1.323,1.219 0.219,0.229 10 false *2 1.542,3.323 1.729,3.563 0.188,0.24 10 false *3 5.802,2.865 6.115,3.021 0.313,0.156 10 false *4 4.844,0.208 5.156,0.365 0.313,0.156 10 false *5
*1 Air Switching Valve Assembly (Bank 2)
·

Air Pressure Sensor


*2 Air Pump Assembly (Bank 2)
*3 Air Pump Assembly (Bank 1) *4 Air Injection Control Driver
*5 Air Switching Valve Assembly (Bank 1)
·

Air Pressure Sensor


- -



d.

Air Injection System (Models with Air Injection Control)

i.

General

1.

To ensure the proper warm-up performance of the Three-Way Catalytic converters (TWCs) after starting a cold engine, an air injection system is used.

-

For this system, each of the bank 2 (right bank) and bank 1 (left bank) has an air pump assembly, air injection control driver, air switching valve assembly, and air pressure sensor. Control of the right bank and left bank is performed independently. 2 pumps are used to increase the amount of air supplied, shortening the catalyst warm-up time.

-

The ECM estimates the amount of air injected to the TWCs based on signals from the intake mass air flow meter sub-assembly in order to regulate the air injection time.

-

Air is injected under the following conditions.

Operation Conditions
Engine Coolant Temperature 5°C to 45°C (41°F to 113°F)
Intake Air Temperature 5°C (41°F) or more

System Diagram
W128466C01
2.667,0.854 2.917,1.115 0.25,0.26 10 false *1 1.667,2.406 1.917,2.667 0.25,0.26 10 false *2 2.906,1.438 3.156,1.698 0.25,0.26 10 false *3 2.896,2.396 3.146,2.656 0.25,0.26 10 false *4 5.302,3.25 5.552,3.51 0.25,0.26 10 false *5 6.115,1.688 6.365,1.948 0.25,0.26 10 false *6 6.115,3.333 6.365,3.594 0.25,0.26 10 false *7 6.115,5.417 6.365,5.677 0.25,0.26 10 false *8 0.896,1.875 1.146,2.135 0.25,0.26 10 false *a 4.156,0.51 4.406,0.771 0.25,0.26 10 false *b 4.167,0.76 4.417,1.021 0.25,0.26 10 false *c 4.177,1.021 4.427,1.281 0.25,0.26 10 false *d 3.667,4.198 3.917,4.458 0.25,0.26 10 false *e 3.594,3.354 3.813,3.604 0.219,0.25 10 false *f 0.885,4.344 1.135,4.604 0.25,0.26 10 false *a 1.656,3.865 1.906,4.125 0.25,0.26 10 false *2 2.938,4.573 3.188,4.833 0.25,0.26 10 false *4 2.906,3.615 3.156,3.875 0.25,0.26 10 false *3 4.25,5.469 4.5,5.729 0.25,0.26 10 false *b 4.271,5.729 4.521,5.99 0.25,0.26 10 false *c 4.271,6.01 4.521,6.271 0.25,0.26 10 false *d 2.677,5.854 2.927,6.115 0.25,0.26 10 false *1 3.688,6.49 3.906,6.74 0.219,0.25 10 false *g 3.51,2.042 3.75,2.208 0.24,0.167 10 false *e
*1 Air Injection Control Driver *2 Air Pump Assembly
*3 Air Pressure Sensor *4 Air Switching Valve Assembly
*5 ECM *6 Engine Coolant Temperature Sensor
*7 Intake Mass Air Flow Meter Sub-assembly *8 Intake Air Temperature Sensor
*a Air *b Pump Actuation Request
*c Valve Actuation Request *d Diagnosis Signal
*e to Exhaust Manifold Sub-assembly *f Bank 2 (Right Bank)
*g Bank 1 (Left Bank) - -





ii.

Construction and Operation

1.

Air Pump

-

Each air pump assembly consists of a DC motor, an impeller and an air filter.

-

The air pump assembly supplies air into an air injection control valve using its impeller.

-

The air filter is maintenance-free.

-

The structure and function of the air pump assemblies for the bank 1 and bank 2 are basically the same.

W128467C02
0.563,3.24 0.677,3.24 0.677,3.24 0.948,2.427 true 3.479,3.469 3.365,3.469 3.365,3.469 2.927,2.563 true 4.292,0.781 4.427,0.781 4.427,0.781 5.052,1.802 true 4.396,3.104 4.531,3.104 4.531,3.104 5.208,2.521 true 5.844,1.188 6.271,0.583 6.271,0.583 6.385,0.583 true 0.375,3.156 0.573,3.375 0.198,0.219 10 false *1 3.521,3.375 3.75,3.594 0.229,0.219 10 false *2 4.104,0.688 4.281,0.938 0.177,0.25 10 false *3 4.208,3 4.385,3.219 0.177,0.219 10 false *4 6.427,0.5 6.656,0.719 0.229,0.219 10 false *5 5.427,3.333 5.656,3.552 0.229,0.219 10 false *c 0.813,0.208 1.042,0.427 0.229,0.219 10 false *a 3.063,0.521 3.292,0.74 0.229,0.219 10 false *a 1.594,0.469 1.823,0.688 0.229,0.219 10 false *b 3.688,1.146 3.917,1.365 0.229,0.219 10 false *b
*1 Air Pump Assembly (Bank 2) *2 Air Pump Assembly (Bank 1)
*3 Impeller *4 DC Motor
*5 Air Filter - -
*a Air In *b Air Out
*c Cross Section - -



2.

Air Switching Valve

-

The air switching valve assembly is operated by a solenoid coil to control air injection and prevent back-flow of exhaust gas. Opening timing of the valve is synchronized with the operation timing of the air pump assembly.

-

An air pressure sensor is built into the corresponding air switching valve assembly.

-

The structure and function of the air switching valve assemblies for the bank 1 and bank 2 are basically the same.

W128468C03
3.979,0.635 6.688,3.333 2.708,2.698 1.552,1.104 1.26,0.458 1.26,0.458 1.125,0.458 true 2.885,1.135 3.052,0.427 3.052,0.427 3.167,0.427 true 1.375,3.281 1.521,3.281 1.521,3.281 1.781,2 true 3.073,3.302 2.938,3.302 2.938,3.302 2.667,2.021 true 5.042,1.99 4.458,1.677 4.458,1.677 4.354,1.677 true 5.396,1.552 5.958,1.375 5.958,1.375 6.073,1.375 true 0.938,0.365 1.156,0.573 0.219,0.208 10 false *1 3.198,0.344 3.417,0.594 0.219,0.25 10 false *2 4.177,1.583 4.354,1.792 0.177,0.208 10 false *3 6.115,1.292 6.333,1.542 0.219,0.25 10 false *4 4.042,0.688 4.26,0.938 0.219,0.25 10 false *c 1.198,3.177 1.385,3.427 0.188,0.25 10 false *b 0.615,1.677 0.833,1.927 0.219,0.25 10 false *a 3.615,1.708 3.833,1.958 0.219,0.25 10 false *a 3.115,3.198 3.333,3.448 0.219,0.25 10 false *b 6.323,1.865 6.542,2.115 0.219,0.25 10 false *b 6.01,2.51 6.229,2.76 0.219,0.25 10 false *a
*1 Air Switching Valve Assembly (Bank 2) *2 Air Switching Valve Assembly (Bank 1)
*3 Valve *4 Solenoid Coil
*a Air Out *b Air In
*c Cross Section (for Bank 1) - -



3.

Air Pressure Sensor

-

The air pressure sensor consists of a semiconductor, which has a silicon chip that changes its electrical resistance when pressure is applied to it. The sensor converts the pressure into an electrical signal, and sends it to the ECM in an amplified form.

-

The structure and function of the air pressure sensors for the bank 1 and bank 2 are basically the same.

W128469E04
1.927,2.156 1.813,2.156 1.813,2.156 1.51,1 true 0.948,0.958 1.094,0.292 1.094,0.292 1.219,0.292 true 1.271,0.208 2.083,0.594 0.813,0.385 10 false Sensor Unit 1.99,2.063 3.115,2.771 1.125,0.708 10 false Air Pressure of Electric Air Pump 3.208,1.052 3.698,1.823 0.49,0.771 10 false Output Voltage 3.792,0.49 4.031,0.688 0.24,0.198 10 false (V) 3.729,0.76 3.979,1.083 0.25,0.323 10 false 4.5 5.865,2.031 6.281,2.229 0.417,0.198 10 false (kPa) 4.417,2.156 5.656,2.771 1.24,0.615 10 false Air Pressure (Absolute Pressure) 3.729,1.51 3.969,1.802 0.24,0.292 10 false 0.5 4.25,2.031 4.458,2.229 0.208,0.198 10 false 45 5.563,2.031 5.802,2.25 0.24,0.219 10 false 150

-

The ECM detects operation of the air injection system based on signals from the air pressure sensor as follows:

(1)

When the air pump assembly is on and the air switching valve assembly is closed, the pressure is stable.

(2)

When the air pump assembly is on and the air switching valve assembly is open, the pressure drops slightly and becomes unstable because of exhaust pulses.

(3)

When the air pump assembly is off and the air switching valve assembly is closed, the pressure remains at atmospheric pressure.

(4)

When the air pump assembly is off and air switching valve assembly is open, the pressure drops below atmospheric pressure and becomes unstable because of exhaust pulses.

W128470E05
0.292,0.448 1.042,0.802 0.75,0.354 10 false Example: 1 3.844,0.438 4.594,0.792 0.75,0.354 10 false Example: 2 0.292,3.01 1.042,3.365 0.75,0.354 10 false Example: 3 3.865,3.083 4.615,3.438 0.75,0.354 10 false Example: 4 0.26,0.948 0.844,1.323 0.583,0.375 10 false Pressure 3.792,0.927 4.375,1.302 0.583,0.375 10 false Pressure 0.302,3.479 0.885,3.854 0.583,0.375 10 false Pressure 3.833,3.49 4.417,3.865 0.583,0.375 10 false Pressure 0.823,2.042 0.938,2.281 0.115,0.24 10 false 0 4.365,2.042 4.479,2.281 0.115,0.24 10 false 0 0.823,4.583 0.938,4.823 0.115,0.24 10 false 0 4.365,4.615 4.479,4.854 0.115,0.24 10 false 0 0.073,2.198 0.917,2.958 0.844,0.76 10 false (Atmospheric Pressure) 0.063,4.781 0.906,5.542 0.844,0.76 10 false (Atmospheric Pressure) 3.594,2.24 4.438,3 0.844,0.76 10 false (Atmospheric Pressure) 3.583,4.813 4.427,5.573 0.844,0.76 10 false (Atmospheric Pressure) 2.74,2.052 3.052,2.385 0.313,0.333 10 false Time 6.271,2.042 6.583,2.375 0.313,0.333 10 false Time 6.271,4.604 6.583,4.938 0.313,0.333 10 false Time 2.75,4.604 3.063,4.938 0.313,0.333 10 false Time 0.927,2.354 2.74,2.646 1.813,0.292 10 false Air Pump Assembly: On 0.938,2.688 3.354,3.021 2.417,0.333 10 false Air Switching Valve Assembly: Closed 4.479,2.354 6.292,2.646 1.813,0.292 10 false Air Pump Assembly: On 4.469,2.688 7.083,3.01 2.615,0.323 10 false Air Switching Valve Assembly: Open 0.927,4.875 2.74,5.167 1.813,0.292 10 false Air Pump Assembly: Off 0.938,5.198 3.333,5.583 2.396,0.385 10 false Air Switching Valve Assembly: Closed 4.479,4.875 6.292,5.167 1.813,0.292 10 false Air Pump Assembly: Off 4.469,5.177 6.938,5.542 2.469,0.365 10 false Air Switching Valve Assembly: Open



4.

Air Injection Control Driver

-

A semiconductor type air injection control driver is used. Activated by the ECM, this driver actuates the air pump assembly and the air switching valve assembly.

-

The air injection control driver also detects failures in the input and output circuits of the air injection driver and transmits the failure status to the ECM via duty cycle signals.

-

The basic functions of the air injection control drivers for the bank 1 and bank 2 are the same. The following system chart shows the bank 1 (left bank).

W128471E03
1.854,1.938 1.948,1.281 1.948,1.281 2.073,1.281 false 1.875,0.927 1.958,0.167 1.958,0.167 2.073,0.167 false 2.188,2.656 2.292,3.479 2.292,3.479 2.438,3.479 true 1.135,1.823 1.479,2.167 0.344,0.344 10 false ECM 2.135,0.083 3.365,0.813 1.229,0.729 10 false Air Pump Actuation Request 1.792,0.958 2.135,1.177 0.344,0.219 10 false AIRP 3.135,0.969 3.375,1.177 0.24,0.208 10 false SIP 2.125,1.208 3.333,1.875 1.208,0.667 10 false Air Switching Valve Actuation Request 1.792,1.938 2.135,2.146 0.344,0.208 10 false AIRV 3.135,1.958 3.375,2.177 0.24,0.219 10 false SIV 2.51,3.396 3.635,3.76 1.125,0.365 10 false Duty Cycle Signal 1.813,2.99 2.115,3.198 0.302,0.208 10 false AIDI 3.24,2.958 3.406,3.177 0.167,0.219 10 false DI 3.479,1.688 4.333,2.396 0.854,0.708 10 false Air Injection Control Driver 4.417,1.198 4.656,1.385 0.24,0.188 10 false VP 4.427,2.323 4.688,2.5 0.26,0.177 10 false VV 5.104,1.521 5.771,2.188 0.667,0.667 10 false Air Pump Assembly 4.948,3.031 5.958,3.771 1.01,0.74 10 false Air Switching Valve Assembly

DI Terminal Output
Condition AIRP AIRV Output (Duty Cycle Signal)
Open circuit in line between AIDI and DI terminals. - -
W128239E01
0.469,1.188 0.813,1.604 0.344,0.417 10 false GND

Failure in line between ECM terminals and air injection control driver. - -
W128244E02
0.458,1.208 0.823,1.583 0.365,0.375 10 false GND

Output failure at air injection control driver. (Failure in air pump actuation circuit) - -
W137335E01
1.427,0.625 1.948,0.865 0.521,0.24 10 false 200 ms 0.469,1.271 0.813,1.531 0.344,0.26 10 false GND

Output failure at air injection control driver. (Failure in air switching valve actuation circuit) - -
W133451E01
0.406,1.292 0.781,1.625 0.375,0.333 10 false GND

Overheat failure of air injection control driver. - -
W133452E01
0.406,1.271 0.813,1.604 0.406,0.333 10 false GND

Normal On On
W133453E01
0.406,1.292 0.833,1.656 0.427,0.365 10 false GND

Off Off
W128244E02
0.458,1.208 0.823,1.583 0.365,0.375 10 false GND

On Off
Off On