Home › General › NEW FEATURES [2018/08 Update] › NEW FEATURES › from 2018.08
NM2660E _V1 General _074678 NEW FEATURES [2018/08 Update] _0362911 NEW FEATURES UN GENERAL/CONTROL/DETAILS F

NEW FEATURES [2018/08 Update]  NEW FEATURES  GENERAL/CONTROL/DETAILS  PRE-CRASH SAFETY SYSTEM  


GENERAL


a.

Toyota Safety Sense

i.

Preventive safety package "Toyota Safety Sense" has been adopted to support the safety drive.


ii.

System that are included in the "Toyota Safety Sense" are as follows:

·

Pre-crash Safety (PCS)

·

Dynamic Radar Cruise Control System

·

Lane Departure Alert System (LDA)

·

Automatic High Beam (AHB)




b.

Pre-crash Safety (PCS)

i.

The pre-crash safety helps to lessen the damage sustained in a collision by operating in unison with warning devices and brake systems.


ii.

The pre-crash safety detects the vehicle and pedestrian* in front of the vehicle based on both data from a forward recognition camera (camera sensor) and millimeter wave radar sensor assembly.


iii.

If the pre-crash safety determines that the possibility of a collision is high, pre-crash warning control and pre-crash brake assist control is performed, and if a collision is imminent, pre-crash braking control will be performed to help avoid and reduce the impact of the collision.

HINT:

*: Depending on the region in which the vehicle was sold, the pedestrian detection function may not be available.


Imminent Collision Judgment
Y196895C01
2.25,0.969 2.583,0.625 true 1.01,1.927 1.333,1.563 true 2.125,1.844 1.813,1.24 true 3.323,1.615 3.417,1.25 true 4.042,2.448 4.438,1.583 true 2.042,2.813 2.854,3.292 true 3.542,4.229 3.708,3.208 true 4.896,3.781 3.708,2.917 true 1.875,2.656 2.063,2.885 0.188,0.229 10 false *1 3.448,4.229 3.719,4.479 0.271,0.25 10 false *2 4.927,3.74 5.156,3.969 0.229,0.229 10 false *3 4.438,1.396 4.646,1.677 0.208,0.281 10 false *4 0.792,0.302 1.052,0.583 0.26,0.281 10 false *a 0.896,1.917 1.146,2.167 0.25,0.25 10 false *b 2.115,1.833 2.333,2.094 0.219,0.26 10 false *c 3.219,1.625 3.458,1.896 0.24,0.271 10 false *d 2.594,0.438 2.844,0.688 0.25,0.25 10 false *e
*1 Millimeter Wave Radar Sensor Assembly *2 Brake Booster with Master Cylinder Assembly
·

Skid Control ECU


*3 Driving Support ECU Assembly *4 Forward Recognition Camera (Camera Sensor)
*a Collision Imminent *b Radar Sensor Detection Area
*c Vehicle Ahead *d Own Vehicle
*e Camera Detection Area - -




c.

The pre-crash safety uses a radar sensor and camera sensor to detect vehicles and pedestrians* in front of your vehicle. When the system determines that the possibility of a frontal collision with a vehicle or pedestrian* is high, a warning operates to urge the driver to take evasive action and the potential brake pressure is increased to help the driver avoid the collision. If the system determines that the possibility of a frontal collision with a vehicle or pedestrian* is extremely high, the brakes are automatically applied to help avoid the collision or help reduce the impact of the collision.

HINT:

*: Depending on the region in which the vehicle was sold, the pedestrian detection function may not be available. See the following table for details.


Countries/areas Function availability Regions
Ukraine, Kazakhstan, Russia (East and West), Australia, New Zealand, Oman, Qatar, Kuwait, Saudi Arabia, Bahrain, U.A.E. The pedestrian detection function is available. Region A
Azerbaijan, Georgia, Armenia, Syria, Jordan, Lebanon, South Africa The pedestrian detection function is not available. Region B



PRECAUTION


a.

Toyota Safety Sense

i.

The "Toyota Safety Sense", is designed to operate under the assumption that the driver will drive safely, and is designed to help reduce the impact to the occupants and the vehicle in the case of a collision or assist the driver in normal driving conditions.


ii.

As there is a limit to the degree of recognition accuracy and control performance that this system can provide, do not overly rely on this system. The driver is always responsible for paying attention to the vehicle's surroundings and driving safely.



b.

Limitations of the pre-crash safety

i.

The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. Do not use the pre-crash safety instead of normal braking operations under any circumstances. This system will not prevent collisions or lessen collision damage or injury in every situation. Do not overly rely on this system. Failure to do so may lead to an accident, resulting in death or serious injury.


ii.

Although this system is designed to help avoid a collision or help reduce the impact of the collision, its effectiveness may change according to various conditions, therefore the system may not always be able to achieve the same level of performance. Read the following conditions carefully. Do not overly rely on this system and always drive carefully.


iii.

Do not attempt to test the operation of the pre-crash safety yourself, as the system may not operate properly, possibly leading to an accident.



c.

Pre-crash braking

i.

When the pre-crash braking function is operating, a large amount of braking force will be applied.


ii.

If the vehicle is stopped by the operation of the pre-crash braking function, the pre-crash braking function operation will be canceled after approximately 2 seconds. Depress the brake pedal as necessary.


iii.

The pre-crash braking function may not operate if certain operations are performed by the driver. If the accelerator pedal is being depressed strongly or the steering wheel is being turned, the system may determine that the driver is taking evasive action and possibly prevent the pre-crash braking function from operating.


iv.

In some situations, while the pre-crash braking function is operating, operation of the function may be canceled if the accelerator pedal is depressed strongly or the steering wheel is turned and the system determines that the driver is taking evasive action.


v.

If the brake pedal is being depressed, the system may determine that the driver is taking evasive action and possibly delay the operation timing of the pre-crash braking function.



d.

Pedestrian detection function*

i.

The pre-crash safety detects pedestrians based on the size, profile, and motion of a detected object. However, a pedestrian may not be detected depending on the surrounding brightness and the motion, posture, and angle of the detected object, preventing the system from operating properly.

HINT:

*: For countries/areas specified as Region B, the pedestrian detection function may not be available.


Y191501



e.

When to disable the pre-crash safety

i.

In the following situations, disable the system, as it may not operate properly, possibly leading to an accident resulting in death or serious injury:

·

When the vehicle is being towed

·

When your vehicle is towing another vehicle

·

When transporting the vehicle via truck, boat, train or similar means of transportation

·

When the vehicle is raised on a lift with the engine running and the tires are allowed to rotate freely

·

When inspecting the vehicle using a drum tester such as a chassis dynamometer or speedometer tester, or when using an on vehicle wheel balancer

·

When a strong impact is applied to the front bumper or front grille, due to an accident or other reasons

·

If the vehicle cannot be driven in a stable manner, such as when the vehicle has been in an accident or is malfunctioning

·

When the vehicle is driven in a sporty manner or off-road

·

When the tires are not properly inflated

·

When the tires are very worn

·

When tires of a size other than specified are installed

·

When tire chains are installed

·

When a compact spare tire or an emergency tire puncture repair kit is used

·

If equipment (snow plow, etc.) that may obstruct the millimeter wave radar sensor assembly or forward recognition camera (camera sensor) is temporarily installed to the vehicle.




f.

Situations in which the system may not operate properly

i.

In some situations such as the following, a vehicles may not be detected by the millimeter wave radar sensor assembly and forward recognition camera (camera sensor), preventing the system from operating properly:

·

If an oncoming vehicle is approaching your vehicle

·

If a vehicle ahead is a motorcycle or bicycle

·

When approaching the side or front of a vehicle

·

If a preceding vehicle has a small rear end, such as an unloaded truck

·

If a preceding vehicle has a low rear end, such as a low bed trailer

Y186305

·

If a vehicle ahead is carrying a load which protrudes past its rear bumper

·

If a vehicle ahead has extremely high ground clearance

Y186321

·

If a vehicle ahead is irregularly shaped, such as a tractor or side car

·

If the sun or other light is shining directly on a vehicle ahead

·

If a vehicle cuts in front of your vehicle or emerges from beside a vehicle

·

If a vehicle ahead makes an abrupt maneuver (such as sudden swerving, acceleration or deceleration)

·

When suddenly cutting behind a preceding vehicle

·

When a vehicle ahead is not directly in front of your vehicle

Y191505

·

When driving in inclement weather such as heavy rain, fog, snow, or a sandstorm

·

When the vehicle is hit by water, snow, dust, etc. from a vehicle ahead

·

When driving through steam or smoke

·

When driving in a place where the surrounding brightness changes suddenly, such as at the entrance or exit of a tunnel

·

When a very bright light, such as the sun or the headlights of oncoming traffic, shines directly into the forward recognition camera (camera sensor)

·

When the surrounding area is dim, such as at dawn or dusk, or while at night or in a tunnel

·

After the engine has started the vehicle has not been driven for a certain amount of time

·

While making a left/right turn and for a few seconds after making a left/right turn

·

While driving on a curve and for a few seconds after driving on a curve

·

If your vehicle is skidding

·

If the front of the vehicle is raised or lowered

Y192590

·

If the wheels are misaligned

·

If a wiper blade is blocking the forward recognition camera (camera sensor)

·

The vehicle is wobbling

·

The vehicle is being driven at extremely high speeds

·

When driving on a hill

·

If the millimeter wave radar sensor assembly or forward recognition camera (camera sensor) is misaligned



ii.

In some situations such as the following, sufficient braking force may not be obtained, preventing the system from performing properly:

·

If the braking functions cannot operate to their full extent, such as when the brake parts are extremely cold, extremely hot, or wet

·

If the vehicle is not properly maintained (brakes or tires are excessively worn, improper tire inflation pressure, etc.)

·

When the vehicle is being driven on a gravel road or other slippery surface



iii.

Some pedestrians such as the following may not be detected by the millimeter wave radar sensor assembly and forward recognition camera (camera sensor), preventing the system from operating properly*:

·

Pedestrians shorter than approximately 3.2 ft. (1 m) or taller than approximately 6.5 ft. (2 m)

·

Pedestrians wearing oversized clothing (a rain coat, long skirt, etc.), making their silhouette obscure

·

Pedestrians who are carrying large baggage, holding an umbrella, etc., hiding part of their body

·

Pedestrians who are bending forward or squatting

·

Pedestrians who are pushing a stroller, wheelchair, bicycle or other vehicle

·

Groups of pedestrians which are close together

·

Pedestrians who are wearing white and look extremely bright

·

Pedestrians in the dark, such as at night or while in a tunnel

·

Pedestrians whose clothing appears to be nearly the same color or brightness as their surroundings

·

Pedestrians near walls, fences, guardrails, or large objects

·

Pedestrians who are on a metal object (manhole cover, steel plate, etc.) on the road

·

Pedestrians who are walking fast

·

Pedestrians who are changing speed abruptly

·

Pedestrians running out from behind a vehicle or a large object

·

Pedestrians who are extremely close to the side of the vehicle (outside rear view mirror, etc.)

HINT:

*: For countries/areas specified as Region B, the pedestrian detection function may not be available.





g.

If the PCS warning light flashes or illuminates, and a warning message is displayed on the multi-information display

i.

The pre-crash safety may be temporarily unavailable or there may be a malfunction in the system.

·

In the following situations, the warning light will turn off, the message will disappear and the system will become operational when normal operating conditions return:

-

When the millimeter wave radar sensor assembly or forward recognition camera (camera sensor) or the area around either sensor is hot, such as in the sun

-

When the millimeter wave radar sensor assembly or forward recognition camera (camera sensor) or the area around either sensor is cold, such as in an extremely cold environment

-

When a front sensor is dirty or covered with snow, etc.

-

When the part of the windshield in front of the forward recognition camera (camera sensor) is fogged up or covered with condensation or ice

-

If the forward recognition camera (camera sensor) is obstructed, such as when the hood is open or a sticker is attached to the windshield near the forward recognition camera (camera sensor)


·

If the PCS warning light continues to flashes, illuminates or the warning message does not disappear, the system may be malfunctioning.




h.

If VSC is disabled

i.

If VSC is disabled, the pre-crash brake assist and pre-crash braking functions are also disabled.


ii.

The PCS warning light will turn on and "VSC Turned Off Pre-crash Brake System Unavailable" will be displayed on the multi-information display.



i.

To avoid malfunction of the millimeter wave radar sensor assembly

i.

Observe the following precautions.


ii.

Otherwise, the millimeter wave radar sensor assembly may not operate properly, possibly leading to an accident resulting in death or serious injury.

·

Keep the millimeter wave radar sensor assembly and front grille emblem clean at all times.

·

If the front of the millimeter wave radar sensor assembly or the front or back of the front grille emblem is dirty or covered with water droplets, snow, etc., clean it.

·

Clean the millimeter wave radar sensor assembly and front grille emblem with a soft cloth so you do not mark or damage them.

Y219008C02
2.635,1.188 2.729,0.698 2.729,0.698 2.896,0.698 true 2.063,2.063 2.229,2.063 2.229,2.063 2.406,1.49 true 2.938,0.615 3.156,0.854 0.219,0.24 10 false *1 1.885,1.979 2.083,2.188 0.198,0.208 10 false *2
*1 Millimeter Wave Radar Sensor Assembly *2 Front Grille Emblem


·

Do not attach accessories, stickers (including transparent stickers) or other items to the millimeter wave radar sensor assembly, front grille emblem or surrounding area.

·

Do not subject the millimeter wave radar sensor assembly or surrounding area to a strong impact.

·

Do not disassemble the millimeter wave radar sensor assembly.

·

Do not modify or paint the millimeter wave radar sensor assembly, front grille emblem or surrounding area.

·

The millimeter wave radar sensor assembly complies with relevant radio wave regulations, as shown by the label attached to the sensor. Do not remove the label. Additionally, disassembly or modification of the millimeter wave radar sensor assembly may be prohibited by law.




j.

To avoid malfunction of the forward recognition camera (camera sensor)

i.

Observe the following precautions.


ii.

Otherwise, the forward recognition camera (camera sensor) may not operate properly, possibly leading to an accident resulting in death or serious injury.

·

Keep the windshield clean at all times.

-

If the windshield is dirty or covered with an oily film, water droplets, snow, etc., clear the windshield.

-

If a glass coating agent is applied to the windshield, it will still be necessary to use the windshield wipers to remove water droplets, etc., from the area of the windshield in front of forward recognition camera (camera sensor).


·

Do not attach objects, such as stickers, transparent stickers, and so forth, to the outer side of the windshield in front of the forward recognition camera (camera sensor) (shaded area in the illustration).

Y223262C01
2.823,1.094 3.01,1.323 0.188,0.229 10 false *a 2.99,1.552 3.302,1.708 0.313,0.156 10 false *b
*a From the top of the windshield to approximately 0.4 in. (1 cm) below the bottom of the forward recognition camera (camera sensor) *b Approximately 7.9 in. (20 cm)
(Approximately 4.0 in. (10 cm) to the right and left from the center of the forward recognition camera (camera sensor))


·

If the part of the windshield in front of the forward recognition camera (camera sensor) is fogged up or covered with condensation or ice, use the windshield defogger to remove the fog, condensation or ice.

·

If water droplets cannot be properly removed from the area of the windshield in front of the forward recognition camera (camera sensor) by the windshield wipers, replace the wiper insert or wiper blade.

·

Do not attach window tinting to the windshield.

·

Replace the windshield if it is damaged or cracked. If the windshield needs to be replaced, replace it with a regular parts number.

·

Do not get the forward recognition camera (camera sensor) wet.

·

Do not allow bright lights to shine into the forward recognition camera (camera sensor).

·

Do not dirty or damage the forward recognition camera (camera sensor). When cleaning the inside of the windshield, do not allow glass cleaner to contact the lens. Also, do not touch the lens.

·

Do not subject the forward recognition camera (camera sensor) to a strong impact.

·

Do not change the installation position or direction of the forward recognition camera (camera sensor) or remove it.

·

Do not disassemble the forward recognition camera (camera sensor).

·

Do not modify any components of the vehicle around the forward recognition camera (camera sensor) (inside rear view mirror, sun visors, etc.) or ceiling.

·

Do not attach any accessories that may obstruct the forward recognition camera (camera sensor) to the hood, front grille or front bumper.

·

If a surfboard or other long object is to be mounted on the roof, make sure that it will not obstruct the forward recognition camera (camera sensor).

·

Do not modify the headlights or other lights.





SYSTEM DIAGRAM


Y213266E02
0.135,8.417 1.594,8.781 1.458,0.365 10 false *: Models with AVS 0.333,0.135 2.438,0.771 2.104,0.635 10 false Pre-crash System Cancel Switch Assembly 0.729,0.906 2.01,1.313 1.281,0.406 10 false Skid Control Buzzer 0.354,1.417 2.125,1.813 1.771,0.396 10 false Forward Recognition Camera (Camera Sensor) 0.646,3.344 2.031,3.698 1.385,0.354 10 false Millimeter Wave Radar Sensor Assembly 0.219,2.552 2.479,2.948 2.26,0.396 10 false Camera Heater (Forward Recognition Hood with Heater Sub-assembly) 0.552,4.229 2.104,4.427 1.552,0.198 10 false Airbag Sensor Assembly 0.344,2.01 1.698,2.219 1.354,0.208 10 false - Monocular Camera 0.542,4.594 1.719,4.802 1.177,0.208 10 false - Yawrate Sensor 0.969,5.063 1.708,5.292 0.74,0.229 10 false Stop Lights 0.479,5.542 2.26,5.813 1.781,0.271 10 false Stop Light Switch Assembly 0.865,6.042 1.823,6.281 0.958,0.24 10 false Speed Sensors 0.948,6.594 1.729,6.833 0.781,0.24 10 false Pump Motor 0.396,7.104 2.448,7.448 2.052,0.344 10 false Master Cylinder Pressure Sensor 0.813,7.677 1.906,7.958 1.094,0.281 10 false VSC OFF Switch 3.188,5.969 4.01,6.479 0.823,0.51 10 false Skid Control ECU 5.323,0.833 6.583,1.323 1.26,0.49 10 false Driving Support ECU Assembly 5.063,2.542 6.75,2.771 1.688,0.229 10 false Suspension Control ECU* 5.24,3.49 6.615,3.75 1.375,0.26 10 false Central Gateway ECU 5.76,4.167 6.115,4.417 0.354,0.25 10 false ECM 5.156,4.708 6.781,5.115 1.625,0.406 10 false Main Body ECU (Multiplex Network Body ECU) 5.417,5.51 6.51,5.75 1.094,0.24 10 false Steering Sensor 4.99,6.031 6.844,6.375 1.854,0.344 10 false Combination Meter Assembly 4.979,6.438 6.938,6.833 1.958,0.396 10 false - PCS Warning Light (PCS OFF Indicator Light) 4.969,7.021 6.427,7.26 1.458,0.24 10 false - Master Warning Light 4.969,7.396 6.604,7.667 1.635,0.271 10 false - Multi-information Display 4.948,7.781 5.865,7.99 0.917,0.208 10 false - Multi Buzzer 3.646,4.094 4.5,4.292 0.854,0.198 10 false CAN (Bus 2) 3.896,2.844 4.698,3.125 0.802,0.281 10 false CAN (Bus 5) 3.385,1.313 4.438,1.594 1.052,0.281 10 false CAN (Local Bus) 1.76,8.167 4.667,8.542 2.906,0.375 10 false Brake Booster with Master Cylinder Assembly


PARTS LOCATION


Y200014C03
0.854,1.594 1.771,2.208 true 1.115,2.854 2.01,2.417 true 3.021,2.969 3.385,3.573 true 3.375,1.146 3.781,0.25 true 5.823,1.531 6.458,0.958 true 4.51,1.76 5.677,3.115 true 5.542,2.313 6.198,2.771 true 1.573,0.802 2.448,1.667 true 2.823,0.365 3.135,2.135 true 0.781,3.771 1.198,4.354 true 2.417,4.625 2.677,5.313 true 1.073,5.365 1.656,4.76 true 1.583,6 2.417,6.521 true 1.104,6.813 1.979,6.948 true 1.5,8.01 2.281,7.146 true 2.469,7 3.104,8.406 true 3.865,7.344 4.469,8.448 true 4.385,7.281 5.5,8.406 true 3.344,6.885 5.813,7.5 true 3.771,4.813 3.177,6.729 true 4.865,4.854 4.229,6.031 true 5.635,5.083 4.865,6.125 true 0.635,3.583 0.906,3.781 0.271,0.198 10 false *11 1.427,0.625 1.698,0.823 0.271,0.198 10 false *1 0.698,1.438 0.969,1.635 0.271,0.198 10 false *2 0.917,5.396 1.188,5.594 0.271,0.198 10 false *12 2.583,5.354 2.854,5.552 0.271,0.198 10 false *13 1.333,5.844 1.604,6.042 0.271,0.198 10 false *14 0.844,6.688 1.115,6.885 0.271,0.198 10 false *15 1.333,8.031 1.604,8.229 0.271,0.198 10 false *16 3.01,8.448 3.281,8.646 0.271,0.198 10 false *17 4.406,8.479 4.677,8.677 0.271,0.198 10 false *18 5.458,8.438 5.729,8.635 0.271,0.198 10 false *19 5.854,7.406 6.125,7.604 0.271,0.198 10 false *20 0.948,2.792 1.219,2.99 0.271,0.198 10 false *3 3.365,3.604 3.635,3.802 0.271,0.198 10 false *4 5.688,3.146 5.958,3.344 0.271,0.198 10 false *5 6.26,2.74 6.531,2.938 0.271,0.198 10 false *6 6.51,0.854 6.99,1.052 0.479,0.198 10 false *7 (*A) 3.844,0.26 4.146,0.427 0.302,0.167 10 false - *9 2.677,0.167 2.948,0.365 0.271,0.198 10 false *10 5.646,4.896 5.917,5.104 0.271,0.208 10 false *21 4.833,4.656 5.104,4.854 0.271,0.198 10 false *22 3.688,4.615 3.958,4.813 0.271,0.198 10 false *23 3.823,0.063 4.104,0.229 0.281,0.167 10 false *8
*A Models with AVS - -
*1 ECM *2 Millimeter Wave Radar Sensor Assembly
*3 Front Speed Sensor RH *4 Front Speed Sensor LH
*5 Rear Speed Sensor RH *6 Rear Speed Sensor LH
*7 Suspension Control ECU *8 Forward Recognition Camera (Camera Sensor)
*9 Camera Heater (Forward Recognition Hood with Heater Sub-assembly) *10 Brake Booster with Master Cylinder Assembly
·

Skid Control ECU


*11 PCS Warning Light *12 Master Warning Light
*13 Multi-information Display *14 Combination Meter Assembly
*15 Main Body ECU (Multiplex Network Body ECU) *16 Stop Light Switch Assembly
*17 Skid Control Buzzer Assembly *18 Airbag Sensor Assembly
*19 Console Switch Module
·

VSC OFF Switch


*20 Pre-crash System Cancel Switch Assembly
*21 Central Gateway ECU *22 Driving Support ECU Assembly
*23 Steering Sensor - -



FUNCTION OF MAIN COMPONENTS


Item Function
Combination Meter Assembly PCS Warning Light (PCS OFF Indicator Light)
·

Flashes or illuminates to warn the driver in accordance with signals from the driving support ECU assembly.

·

Flashes or illuminates when the system is malfunctioning or temporarily disabled.

·

Illuminates when the pre-crash safety is not available due to if the pre-crash safety is off or when pre-crash brake and pre-crash brake assist operation are disabled since the VSC has been disabled.


Multi-information Display
·

Displays a warning message to inform or warn the driver of the system condition in accordance with signals from the driving support ECU assembly.

·

Displays pre-crash safety ON/OFF and warning timing (Far/Middle/Near) when operated the pre-crash system cancel switch assembly.


Master Warning Light Illuminates to warn the driver in accordance with signals from the driving support ECU assembly.
Multi Buzzer Sounds to warn the driver in accordance with signals from the driving support ECU assembly when the system is malfunctioning.
Millimeter Wave Radar Sensor Assembly Radiates millimeter wave radar forward, uses the reflected millimeter waves for detecting the presence of a vehicle ahead, the vehicle-to-vehicle distance, and the relative speed, and then transmits this information to the driving support ECU assembly.
Forward Recognition Camera (Camera Sensor)
·

Obtains the detection information of the front of the vehicle and pedestrians*1 from the forward recognition camera, and sends a signal to the driving support ECU assembly.

·

Controls the power to the camera heater (forward recognition hood with heater sub-assembly) when the outside temperature is low.


Camera Heater (Forward Recognition Hood with Heater Sub-assembly) The sheet heater (heating element) is heated by current control of the forward recognition camera (camera sensor) when the power is on to prevent condensation on the windshield glass in front of the forward recognition camera (camera sensor).
Driving Support ECU Assembly Determines whether a collision is imminent based on the information received from the sensors. It then outputs a brake assist standby request signal and pre-crash brake request signal if required.
Brake Booster with Master Cylinder Assembly Skid Control ECU
·

Receives a brake assist standby request signal from the driving support ECU assembly and switches the brake assist to standby mode. When a master cylinder pressure signal is input, it activates the brake assist.

·

Receives a pre-crash brake request signal from the driving support ECU assembly, and then applies the brakes.

·

Transmits stop light signal and vehicle speed signals to the driving support ECU assembly.


Speed Sensor Detects speed of each wheel and transmits the signals to the skid control ECU.
Airbag Sensor Assembly Yawrate Sensor Detects the yaw rate and lateral/longitudinal deceleration of the vehicle and transmits the signal to the skid control ECU and the driving support ECU assembly.
Steering Sensor Detects the angle and direction of steering and transmits a signal to the skid control ECU and the driving support ECU assembly.
Pre-crash System Cancel Switch Assembly
·

Disables the pre-crash safety operation when the switch is turned on. The PCS warning light illuminates to show that the pre-crash safety operation is disabled.

·

Changing the pre-crash warning timing (Far/Middle/Near) when pushing the pre-crash system cancel switch assembly.


Integration Control and Panel Assembly VSC OFF Switch Disables the pre-crash brake and pre-crash brake assist operation when VSC OFF mode.
Pre-crash Safety City Buzzer Sounds to warn the driver in accordance with signals from the driving support ECU assembly.
ECM
·

Transmits the shift position signal and accelerator opening rate signal of the vehicle to driving support ECU assembly.

·

Controls engine output based on the signal from the driving support ECU assembly.


Stop Light Switch Assembly Detects if the brake pedal is depressed and transmits a signal to the skid control ECU.
Main Body ECU (Multiplex Network Body ECU) Transmits the specification signal of the vehicle to driving support ECU assembly.
Central Gateway ECU Transmits the signal between the CAN communication bus.
Suspension Control ECU*2 Receives an AVS (Adaptive Variable Suspension system) operation request signal from the driving support ECU assembly and operates the absorber control actuators.
Absorber Control Actuator*2 Changes the damping force of the shock absorber assembly.

HINT:

*1: For countries/areas specified as Region B, the pedestrian detection function may not be available.

*2: Models with AVS (Adaptive Variable Suspension system)



FUNCTION


a.

Pre-crash Safety

·

The pre-crash safety uses a millimeter wave radar sensor assembly and forward recognition camera (camera sensor) to detect vehicle and pedestrian* in front of your vehicle.

·

When the system determines that the possibility of a frontal collision with a vehicle or pedestrian* is high, a warning operates to urge the driver to take evasive action and the potential brake pressure is increased to help the driver avoid the collision.

·

If the system determines that the possibility of a frontal collision with a vehicle or pedestrian* is extremely high, the brakes are automatically applied to help avoid the collision or help reduce the impact of the collision.

HINT:

*: For countries/areas specified as Region B, the pedestrian detection function may not be available.



i.

Pre-crash warning

1.

When the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the multi-information display to urge the driver to take evasive action.



ii.

Pre-crash brake assist

1.

When the system determines that the possibility of a frontal collision is high, the system applies greater braking force in relation to how strongly the brake pedal is depressed.



iii.

Pre-crash braking

1.

When the system determines that the possibility of a frontal collision is high, the system warns the driver. If the system determines that the possibility of a frontal collision is extremely high, the brakes are automatically applied to help avoid the collision or reduce the collision speed.



iv.

Suspension control (Models with AVS (Adaptive Variable Suspension system))

1.

When the system determines that the possibility of a frontal collision is high, the AVS (Adaptive Variable Suspension system) will control the damping force of the shock absorbers to help maintain an appropriate vehicle posture.




b.

Warning Indication

i.

The combination meter assembly uses the multi-information display, master warning light, PCS warning light and buzzer to provide the driver with pre-crash safety malfunction and indications.


ii.

If the driving support ECU assembly determines that a possibility of a collision is high, it sends a signal to the combination meter assembly and pre-crash safety city buzzer. Upon receiving this signal, the combination meter assembly indicates a warning using the multi-information display. Also upon receiving this signal, the pre-crash safety city buzzer sounds. Details are indicated below.

When there is a high possibility of a collision
Multi-information Display Pre-crash Safety City Buzzer
BRAKE! Sound Continuously


iii.

Each time the pre-crash system cancel switch assembly is pressed, the warning timing changes as follows:

1.

Far (operation starts earlier)

2.

Middle (default setting)

3.

Near (operation starts later)



iv.

When the pre-crash system cancel switch assembly is pressed to turn the system on, the current warning timing will be displayed on the multi-information display.


v.

The operation timing setting is retained when the engine switch is turned off.

Y196901E01
1.177,1.063 1.531,1.427 0.354,0.365 10 false Far 1,1.594 1.542,1.958 0.542,0.365 10 false Middle 0.792,2.74 2.417,3.094 1.625,0.354 10 false Multi-information Display 5.135,1.135 6.719,1.896 1.583,0.76 10 false Pre-crash System Cancel Switch Assembly 1.115,2.156 1.479,2.5 0.365,0.344 10 false Near


vi.

The pre-crash safety can be turned on or off by operating the pre-crash system cancel switch assembly. When the pre-crash system cancel switch assembly is on for 3 seconds or more, the system operations stops. When the pre-crash safety is off, "Pre-crash Safety Off" is displayed on the multi-information display and the PCS warning light illuminates.

When the pre-crash system cancel switch assembly is operated
Multi-information Display PCS Warning Light Pre-crash Safety
- - ON
Pre-crash Safety Off Illuminates OFF

Y240555E01
0.427,2.552 1.979,2.979 1.552,0.427 10 false Multi-information Display 0.563,1.354 1.792,1.792 1.229,0.438 10 false PCS Warning Light 5.135,1.063 6.792,1.792 1.656,0.729 10 false Pre-crash System Cancel Switch Assembly


vii.

When the system is not available, the following warning occurs to warn the driver.

When a system malfunction and unavailable is detected
Multi-information Display Details Master Warning Light PCS Warning Light Buzzer DTC
Pre-crash Safety Malfunction Visit Your Dealer This message appears when the driving support ECU assembly detects a system malfunction. Illuminates Flashes Sounds Once Repair is required DTCs are stored
Pre-crash Safety Unavailable
·

Millimeter wave radar sensor assembly is misaligned.

·

Temperature or power supply of millimeter wave radar sensor assembly is abnormality.


- Flashes - -
Pre-crash Safety Unavailable Clean Sensor Dirty center mark of upper radiator grille or millimeter wave radar sensor assembly. - Flashes - -
Forward Camera System Unavailable Clean Windshield Dirty or fog windshield glass over the forward recognition camera (camera sensor). - Illuminates - -
Forward Camera System Unavailable Temperature or power supply of forward recognition camera (camera sensor) is abnormality. - Flashes - -
VSC Turned Off Pre-crash Brake System Unavailable VSC operation have been disabled - Illuminates - -




OPERATING CONDITION


a.

Availability of the pedestrian detection function depend on the region in which the vehicle was sold.

Regions Function availability
Region A The pedestrian detection function is available
Region B The pedestrian detection function is not available


b.

Region A (The pedestrian detection function is available)

i.

The pre-crash safety is enabled and the system determines that the possibility of a frontal collision with a vehicle or pedestrian is high. Each function is operational at the following speeds:

Pre-crash warning
·

Vehicle speed is between approximately 7 and 110 mph (10 and 180 km/h). (For detecting a pedestrian, vehicle speed is between approximately 7 and 50 mph (10 and 80 km/h).)

·

The relative speed between your vehicle and the vehicle or pedestrian ahead is approximately 7 mph (10 km/h) or more.


Pre-crash brake assist
·

Vehicle speed is between approximately 20 and 110 mph (30 and 180 km/h). (For detecting a pedestrian, vehicle speed is between approximately 20 and 50 mph (30 and 80 km/h).)

·

The relative speed between your vehicle and the vehicle or pedestrian ahead is approximately 20 mph (30 km/h) or more.


Pre-crash braking
·

Vehicle speed is between approximately 7 and 110 mph (10 and 180 km/h). (For detecting a pedestrian, vehicle speed is between approximately 7 and 50 mph (10 and 80 km/h).)

·

The relative speed between your vehicle and the vehicle or pedestrian ahead is approximately 7 mph (10 km/h) or more.


Suspension control (Models with AVS (Adaptive Variable Suspension system))
·

Vehicle speed is between approximately 20 mph and 110 mph (30 km/h and 180 km/h). (For detecting a pedestrian, vehicle speed is between approximately 20 mph and 50 mph (30 km/h and 80 km/h).)

·

The relative speed between your vehicle and the vehicle or pedestrian ahead is approximately 20 mph (30 km/h) or more.



ii.

The system may not operate in the following situations:

·

If a battery terminal has been disconnected and reconnected and then the vehicle has not been driven for a certain amount of time

·

If the shift lever is in R

·

If VSC is disabled (only the pre-crash warning function will be operational)

·

If the low speed four-wheel drive indicator light is illuminated (only the pre-crash warning function will be operational)




c.

Region B (The pedestrian detection function is not available)

i.

The pre-crash safety is enabled and the system determines that the possibility of a frontal collision with a vehicle is high. Each function is operational at the following speeds:

Pre-crash warning
·

Vehicle speed is between approximately 10 and 110 mph (15 and 180 km/h).

·

The relative speed between your vehicle and the vehicle ahead is approximately 7 mph (10 km/h) or more.


Pre-crash brake assist
·

Vehicle speed is between approximately 20 and 110 mph (30 and 180 km/h).

·

The relative speed between your vehicle and the vehicle ahead is approximately 20 mph (30 km/h) or more.


Pre-crash braking
·

Vehicle speed is between approximately 10 and 110 mph (15 and 180 km/h).

·

The relative speed between your vehicle and the vehicle ahead is approximately 7 mph (10 km/h) or more.


Suspension control (Models with AVS (Adaptive Variable Suspension system))
·

Vehicle speed is between approximately 20 mph and 110 mph (30 km/h and 180 km/h).

·

The relative speed between your vehicle and the vehicle ahead is approximately 20 mph (30 km/h) or more.



ii.

The system may not operate in the following situations:

·

If a battery terminal has been disconnected and reconnected and then the vehicle has not been driven for a certain amount of time

·

If the shift lever is in R

·

If VSC is disabled (only the pre-crash warning function will be operational)

·

If the low speed four-wheel drive indicator light is illuminated (only the pre-crash warning function will be operational)




d.

Cancelation of the pre-crash braking

i.

If either of the following occur while the pre-crash braking function is operating, it will be canceled:

·

The accelerator pedal is depressed strongly.

·

The steering wheel is turned sharply or abruptly.



ii.

If the vehicle is stopped by the operation of the pre-crash braking function, the pre-crash braking function operation will be canceled after approximately 2 seconds. Depress the brake pedal as necessary.



e.

Conditions under which the system may operate even if there is no possibility of a collision

i.

In some situations such as the following, the system may determine that there is a possibility of a frontal collision and operate.

·

When passing a vehicle or pedestrian*

·

When changing lanes while overtaking a preceding vehicle

·

When overtaking a preceding vehicle that is changing lanes

·

When overtaking a preceding vehicle that is making a left/right turn

Y206028

·

When passing a vehicle in an oncoming lane that is stopped to make a right/left turn

Y206029

·

When driving on a road where relative location to vehicle ahead in an adjacent lane may change, such as on a winding road

Y206030

·

When rapidly closing on a vehicle ahead

·

If the front of the vehicle is raised or lowered, such as when the road surface is uneven or undulating

·

When approaching objects on the roadside, such as guardrails, utility poles, trees, or walls

·

When there is a vehicle, pedestrian*, or object by the roadside at the entrance of a curve

Y186309

·

When driving on a narrow path surrounded by as structure, such as in a tunnel or on an iron bridge

·

When there is a metal object (manhole cover, steel plate, etc.), steps, or a protrusion on the road surface or roadside

·

When a crossing pedestrian* approaches very close to the vehicle

Y186316

·

When passing through a place with a low structure above the road (low ceiling, traffic sign, etc.)

Y186313

·

When passing under an object (billboard, etc.) at the top of an uphill road

Y190952

·

When rapidly closing on an electric toll gate barrier, parking area barrier, or other barrier that opens and closes

·

When using an automatic car wash

·

When driving through or under objects that may contact the vehicle, such as thick grass, tree branches, or a banner

Y186314

·

When the vehicle is hit by water, snow, dust, etc. from a vehicle ahead

·

When driving through steam or smoke

·

When there are patterns or paint on the road or a wall that may be mistaken for a vehicle or pedestrian*

·

When driving near an object that reflects radio waves, such as a large truck or guardrail

·

When driving near a TV tower, broadcasting station, electric power plant, or other location where strong radio waves or electrical noise may be present

HINT:

*: For countries/areas specified as Region B, the pedestrian detection function may not be available.






SYSTEM CONTROL


a.

Pre-crash Brake Assist

i.

When the driver depresses the brake pedal after the pre-crash safety has determined that there is the possibility of a collision, brake fluid pressure is increased. If the possibility of a collision is still high, brake fluid pressure is further increased.

Y191467E09
1.031,0.219 2.354,0.75 1.323,0.531 10 false Possibility of collision determined 2.531,0.229 3.302,0.781 0.771,0.552 10 false Brake pedal depressed 3.594,0.229 4.708,0.75 1.115,0.521 10 false High possibility of collision determined 5.094,0.229 5.719,0.771 0.625,0.542 10 false Collision 0.781,1.427 1.677,1.688 0.896,0.26 10 false Normal Driving 1.948,1.427 2.74,1.813 0.792,0.385 10 false Operation on Standby 2.906,1.427 4.208,1.885 1.302,0.458 10 false Brake Fluid Pressure Increased 4.438,1.438 5.167,2.083 0.729,0.646 10 false Brake Fluid Pressure Further Increased 0.063,0.583 0.958,0.844 0.896,0.26 10 false Elapsed Time 2.917,2.927 4.281,3.604 1.365,0.677 10 false Brake fluid pressure is increased as soon as the brake pedal is depressed 5.208,3.448 7.063,3.979 1.854,0.531 10 false Additional brake fluid pressure when possibility of collision is high 5.208,4.417 7.156,4.656 1.948,0.24 10 false Additional Brake Fluid Pressure 5.24,4.844 7.146,5.094 1.906,0.25 10 false Normal Brake Fluid Pressure 0.01,4.521 0.729,4.865 0.719,0.344 10 false Brake Fluid Pressure 0.094,6.24 0.635,6.802 0.542,0.563 10 false Vehicle Speed 5.271,5.823 7.125,6.073 1.854,0.25 10 false Normal Braking 5.25,6.51 7.052,6.875 1.802,0.365 10 false Deceleration when possibility of collision is high 2.948,6.271 4.177,6.719 1.229,0.448 10 false Pre-crash Brake Assist



b.

Pre-crash Braking

i.

When the pre-crash safety detects an object such as a vehicle or pedestrians* in front of the vehicle and determines that the possibility of a collision is high, the system displays a warning message on the multi-information display, and sounds the buzzer to warn the driver.


ii.

When the pre-crash safety determines that a collision is imminent, the system performs pre-crash braking control.

HINT:

*: For countries/areas specified as Region B, the pedestrian detection function may not be available.


Y223237E02
2.563,1.729 2.615,1.865 2.615,1.865 2.781,1.865 true 1.583,1.885 1.75,1.885 1.75,1.885 1.948,1.719 true 1.542,0.323 2.417,1.333 0.875,1.01 10 false Possibility of Collision Determined 2.917,0.292 4.063,1.344 1.146,1.052 10 false High Possibility of Collision Determined 4.51,0.292 5.833,1.042 1.323,0.75 10 false Unavoidable Collision Determined 5.958,0.302 6.531,0.646 0.573,0.344 10 false Collision 0.177,1.302 1.042,1.646 0.865,0.344 10 false Elapsed Time 1.302,1.802 1.583,2.198 0.281,0.396 10 false Far 2.042,1.781 2.49,2.104 0.448,0.323 10 false Middle 1.021,2.292 1.917,2.625 0.896,0.333 10 false Normal Driving 1.99,2.292 5.021,2.656 3.031,0.365 10 false Pre-crash Warning (Display and buzzer sounds)* 3.375,2.813 4.177,3.51 0.802,0.698 10 false Pre-crash Braking 0.719,4.115 1.208,4.844 0.49,0.729 10 false Vehicle Speed 6.271,4.698 7,5.458 0.729,0.76 10 false Speed Reduction 0.385,5.844 6.448,6.531 6.063,0.688 10 false *: Warning timing can be selected from far, middle or near by operating the pre-crash system cancel switch assembly. 2.833,1.792 3.229,2.125 0.396,0.333 10 false Near