Home › General › INTRODUCTION › REPAIR INSTRUCTION › 2014.08–2015.08
RM2660E _V1 General _052769 INTRODUCTION _0254792 REPAIR INSTRUCTION D

INTRODUCTION  REPAIR INSTRUCTION  CUSTOMIZE PARAMETERS  


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER


a.

POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

Tilt & Telescopic
Display Default Contents Setting
Autoaway / Return function ON Turn the auto away/return function ON/OFF ON/OFF


b.

TOYOTA PARKING ASSIST-SENSOR SYSTEM

Warning
Display Default Contents Setting
Rr Sensor Onset Range Wide Sets the buzzer activation range for the rear sensors. Narrow or Wide
Keep Sense Buzzer Avail Makes the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds. Not Avail or Avail
Fr & Rr Buzzer Volume H Changes the buzzer volume setting. L, M1, M2, M3 or H

Sensor
Display Default Contents Setting
Sensor Condition N Avail Makes the sensors available when the shift lever is in N. Not Avail or Avail
Front Side Dist Sensor Long Sets the buzzer activation range for the front sensors. Short or Long
Reverse Range Front Sensor Fsde Changes the operation setting for the vehicle front sensors when the shift lever is in R. F, Fs,Fc, Fsde or F Stop
Non P/R Range Rear Sensor R Stop Changes the operation setting for the vehicle rear sensors when the shift lever is not in P or R. R, Rcrn or R Stop

Display
Display Default Contents Setting
Approach Display OFF Avail The display when moving away from a previously detected obstacle. Not Avail or Avail
Display Mode All The display mode setting (when the intuitive parking assist system is normal). All or Undisp


c.

POWER DOOR LOCK CONTROL SYSTEM

Door Lock
Display Default Contents Setting
Unlock Key Twice OFF Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. If this setting is OFF, turning the driver side door key cylinder once unlocks all doors. ON/OFF


d.

WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System)

Wireless Door Lock
Display Default Contents Setting
Hazard Answer Back ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice. ON/OFF
Wireless Control ON Function that turns the wireless door lock function ON or OFF. ON/OFF
Open Door Warning*1 ON If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds. ON/OFF
Panic Alarm Function*2 ON Function to operate the theft deterrent system by continuously pressing the panic switch on transmitter for 2.5 seconds. ON/OFF
Unlock 2 Operation OFF Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock. ON/OFF
Auto Lock Time 30 s Function to change the time until relocking after unlocking with the wireless door lock function. 30 s/60 s/120 s
Wireless Auto Lock ON Function to control the automatic relocking of doors after unlocking with the wireless door lock function. ON/OFF
Wireless Buzzer Resp ON*3 Wireless buzzer response function. ON/OFF
Wireless Buzzer Volume Level 7 This function changes the wireless buzzer volume. Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7

HINT:

*1: Except China

*2: w/ Panic Switch

*3: Except Europe and China


PSD & PBD Operation (w/ Power Back Door System)
Display Default Contents Setting
Wireless PBD Operation 0.8 s
1Motion*
Function that operates power back door when door control transmitter is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or off).
Function to turn on/off the power back door wireless one motion open operation.*
1 Oper or 2 Oper or 0.8 s or OFF
1Motion or 1 Oper or 2 Oper or 0.8 s or OFF*

HINT:

*: Except Europe



e.

WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)

Wireless Door Lock
Display (item) Default Function Setting
Wireless Control ON The function that turns the wireless door lock on or off. ON or OFF
Hazard Answer Back ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice. ON or OFF
Open Door Warning ON If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 5 seconds. ON or OFF
Auto Lock Time 30 s The function that changes the time until relocking after unlocking the doors with the wireless door lock function. 30 s, 60 s or 120 s
Wireless Buzzer Resp ON This function turns the wireless door lock buzzer response on or off. ON or OFF


f.

ENTRY AND START SYSTEM (for Entry Function)

Entry & Start
Display Default Contents Setting
Ignition Available Area
(Entry ignition available area)
All Function to choose the available area for the key to start the engine and cancel the steering lock. Front/All*
Park Wait Time (Waiting time to permit unlocking door after locking) 2.5s Function that sets the waiting time to permit unlocking the door after the door is locked with the entry lock function. 0.5s/1.5s/2.5s/5s
Back Door Opening Operation (Back door open mode when vehicle is locked) Long Back door opening the operation. Long/Twice/OFF

Warning
Display Default Contents Setting
Passenger Take Key ON Warn a key is taken out by fellow passengers ON/OFF
Key Low Battery Warning (Warn when key battery becomes weak) ON Function that warns the driver that the key battery power is low. ON/OFF
Key Out Range Warning ON Warn Starting E/G when the key is out of range ON/OFF

HINT:

*: "FRONT" means front, and "ALL" means front, rear 1 and rear 2.


PSD & PBD Operation (w/ Power Back Door System)
Display Default Contents Setting
Wireless PBD Operation 0.8 s
(1Motion)*
Function that operates power back door when door control transmitter is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or off).
(Function to turn on/off the power back door wireless one motion open operation.)*
1 Oper or 2 Oper or 0.8 s or OFF
(1Motion or 1 Oper or 2 Oper or 0.8 s or OFF)*

HINT:

*: Except Europe



g.

ENTRY UNLOCK MODE SWITCHING FUNCTION

i.

To use the entry unlock mode switching function, make sure the engine switch is off and simultaneously press and hold the lock switch on the key and another key switch for 5 seconds.

When the switches are pressed and held for 5 seconds, the entry door unlock mode changes in the following order: all door unlock mode, driver door unlock mode.


NOTICE:

After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.


·

All door unlock mode (default):

When a touch sensor is touched, all doors unlock.

·

Driver door unlock mode:

When the driver door touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.



ii.

The certification ECU (smart key ECU assembly) receives this signal from the door control receiver and changes the entry and start system to the entry unlock mode.


iii.
B311425E01
0.176,2.592 2.423,2.753 2.247,0.160 12 w/o Multi-information Display: 0.075,0.145 2.191,0.305 2.116,0.160 12 w/ Multi-information Display: 0.917,2.133 2.481,2.282 1.564,0.149 10 Multi-information Display 1.805,2.133 1.805,1.606 false

The certification ECU (smart key ECU assembly) sounds the wireless door lock buzzer and combination meter buzzer to inform the user that the mode has been switched.

HINT:

The function only changes the entry unlock mode of the entry and start system. It does not switch the unlocking of the wireless door lock control.


·

All door unlock mode:

B311426E02
1.844,0.188 2.26,0.396 0.417,0.208 10 false Mode 0.198,0.667 2.104,0.865 1.906,0.198 10 false Wireless Door Lock Buzzer*1 0.198,2.302 1.021,2.656 0.823,0.354 10 false Combination Meter 1.146,2.302 2.229,2.677 1.083,0.375 10 false Multi-information Display*2 2.354,0.208 3.542,0.406 1.188,0.198 10 false All Doors (Default) 2.552,1.135 2.802,1.302 0.25,0.167 10 false ON 2.479,1.458 2.802,1.635 0.323,0.177 10 false OFF 2.354,2.854 3.896,3.052 1.542,0.198 10 false Displayed for 4 seconds 2.344,3.302 3.198,3.49 0.854,0.188 10 false Sounds once 1.146,3.281 1.667,3.458 0.521,0.177 10 false Buzzer 2.896,1.615 3.896,1.792 1,0.177 10 false Sounds 2 times

HINT:
·

*1: except China.

·

*2: For vehicles with the multi-information display.



·

Driver door unlock mode:

B311427E03
1.833,0.208 2.25,0.417 0.417,0.208 10 false Mode 0.167,0.677 2.073,0.906 1.906,0.229 10 false Wireless Door Lock Buzzer*1 0.167,2.333 0.99,2.885 0.823,0.552 10 false Combination Meter 1.135,2.313 2.219,2.688 1.083,0.375 10 false Multi-information Display*2 2.333,0.198 3.948,0.615 1.615,0.417 10 false Driver Door (Customized) 2.333,1.063 2.646,1.271 0.313,0.208 10 false ON 2.333,1.51 2.719,1.719 0.385,0.208 10 false OFF 2.333,2.875 3.854,3.24 1.521,0.365 10 false Displayed for 4 seconds 2.323,3.281 3.677,3.646 1.354,0.365 10 false Sounds once 1.135,3.292 1.656,3.5 0.521,0.208 10 false Buzzer 3.875,1.635 5.083,1.844 1.208,0.208 10 false Sounds 3 times 2.333,0.656 5.49,0.99 3.156,0.333 10 false Each interval approximately 0.13 seconds 2.958,1.802 3.583,2.042 0.625,0.24 10 false 1 second

HINT:
·

*1: except China.

·

*2: For vehicles with the multi-information display.

·

The above illustration is for LHD vehicles. For RHD vehicles, the left side and right side are reversed.






h.

KEY CANCEL

The key cancel operation disables the following functions:

·

Entry Unlock/Lock

·

Key Lock-in Prevention

·

Memory Call

·

Entry Back Door Open

·

Warning

·

Entry Ignition


i.

The operation procedures are as follows:

Precondition:

Engine switch off, driver side door closed and unlocked.

1.

Unlock the driver side door once with the unlock switch of the key.

2.

Open the driver door within 5 seconds.

3.

Unlock the driver side door twice with the unlock switch of the key within 5 seconds.

4.

Perform close → open twice for the driver door within 30 seconds.

(Driver door: Open condition → Close → Open → Close → Open)

5.

Unlock the driver side door twice with the unlock switch of the key within 5 seconds.

6.

Perform close → open once for the driver door within 30 seconds.

(Driver door: Open condition → Close → Open)

7.

Close the driver door within 5 seconds.

When key cancel is activated, the wireless door lock buzzer sounds twice.

To return to the original condition, perform the procedures again. When the original condition is returned, the wireless door lock buzzer sounds once.




i.

ENTRY AND START SYSTEM (for Start Function)

Entry & Start
Display Default Content Setting
Ignition Available Area All Function to choose the available area for the key to start the engine and cancel the steering lock. Front/All


j.

THEFT DETERRENT SYSTEM (w/ Entry and Start System)

Security
Display Default Contents Setting
Warning by Horn*1 ON Function that allows vehicle horns and security horn to be used as warning device. ON/OFF
Warning by Glass Broken Sensor*2 ON Function that turns the glass breakage sensor on/off. ON/OFF

HINT:
·

*1: w/ Security Horn

·

*2: w/ Glass Breakage Sensor




k.

THEFT DETERRENT SYSTEM (w/o Entry and Start System)

Security
Display Default Contents Setting
Warning by Horn ON Function that allows the vehicle horns and security horn to be used as warning devices. ON/OFF


l.

METER AND GAUGE SYSTEM

Warning
Display (Item) Default Contents Setting
Driver Side Seatbelt Warning Buzzer ON To change the seat-belt warning buzzer. ON / OFF
Front Passenger Side Seatbelt Warning Buzzer ON To change the seat-belt warning buzzer. ON / OFF

Unit Conversion
Display (Item) Default Contents Setting
Units By Region Different for each vehicle To change the units of the display. Km/l JP / Km/l / Ml/g US / Ml/g UK

Display
Display (Item) Default Contents Setting
Eco Drive Indicator Zone ON To change the eco driving indicator zone display. ON / OFF
Language None To change the language of the display. Eng US / Eng UK / French / German / Spanish / Italian / Japanes / CHN Sim / CHN Trd


m.

SEAT BELT WARNING SYSTEM

Seat Belt Warning
Display Default Contents Setting Relevant ECU
D-Seatbelt Warning Buzzer*1 ON If driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer. ON or OFF Combination meter assembly
P-Seatbelt Warning Buzzer*1, *2 ON If front passenger side seat belt is unfastened with the front passenger seat occupied and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer. ON or OFF Combination meter assembly

*1: w/ Seat Belt Warning Buzzer

*2: w/ Airbag System



n.

AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

Air Conditioner
Display Default Contents Setting Relevant ECU
Set Temperature Shift Normal Function to set the temperature shift. +2 C/+1 C/Normal/-1 C/-2 C Air conditioning amplifier assembly
Compressor/Air Inlet DEF operation Link Function to automatically turn the A/C on when the FRONT DEF button is pressed. Normal/Link Air conditioning amplifier assembly
Compressor Mode Automatic Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C switch is off. Manual/Automatic Air conditioning amplifier assembly
Air Inlet Mode Automatic Function to automatically change to recirculation mode when the A/C is turned on. Manual/Automatic Air conditioning amplifier assembly
Foot/DEF Auto Mode ON Function to turn the airflow from FOOT/DEF on automatically when auto mode is on. ON/OFF Air conditioning amplifier assembly
Foot/DEF Automatic Blow Up Function ON Function to change the blower level automatically when the defroster is on. ON/OFF Air conditioning amplifier assembly
Ambient Temperature Shift Normal Function to control the shifted ambient temperature in relation to the displayed ambient temperature. +3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C Air conditioning amplifier assembly
Add Foot Air in FACE Mode ON When the FACE mode is selected, an additional amount of air blow to the foot area. Selecting OFF will cancel this additional air flow. ON/OFF Air conditioning amplifier assembly


o.

AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)

Air Conditioner
Display Default Content Setting Relevant ECU
Ambient Temperature Shift Normal Function to control the shifted ambient temperature in relation to the displayed ambient temperature. +3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C Air conditioning amplifier assembly


p.

POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows)

Power Window
Display (Item) Default Contents Setting
Door Key P/W Up OFF Function that raises all the power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the lock position for more than 2.3 sec. ON/OFF
Door Key P/W Down OFF Function that lowers all the power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the unlock position for more than 2.3 sec. ON/OFF
P/W Up W/ Transmit OFF Function that raises all the power windows when, with the ignition switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 sec. ON/OFF
P/W Down W/ Transmit OFF Function that lowers all the power windows when, with the ignition switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 sec. ON/OFF
P/W Up W/ Smart OFF Function that raises all the power windows when, with the ignition switch off, the entry lock switch on the driver side door outside handle is pressed and held for more than 3.0 sec. ON/OFF


q.

SLIDING ROOF SYSTEM

Slide Roof
Display (Item) Default Contents Setting
Door Key Related Open ON The function to manually open the sliding roof linked with the power window if holding the driver side door key for 3 seconds or more to unlock position when the engine switch is off. ON/OFF
Door Key Related Close ON The function to manually close the sliding roof linked with the power window if holding the driver side door key for 3 seconds or more to lock position when the engine switch is off. ON/OFF
Wireless Key Related Open ON The function to manually open the sliding roof linked with the power window if pressing the transmitter unlock switch for 3 seconds or more when the engine switch is off. ON/OFF
Wireless Key Related Close OFF The function to manually close the sliding roof linked with the power window if pressing the transmitter lock switch for 3 seconds or more when the engine switch is off. ON/OFF
Door Handle Lock Button ON The function to manually close the sliding roof linked with the power window if pushing the door lock switch for 3 seconds or more when the engine switch is off and the key is outside vehicle. ON/OFF
Door Key Related Operation Slide The function to select tilt up or slide open of manual sliding roof operation linked with the power window activated by holding the driver side door key for 3 seconds or more to unlock position when the engine switch is off. Tilt/Slide
Wireless Key Related Operation Slide The function to select tilt up or slide open of manual sliding roof operation linked with the power window activated by pressing on the transmitter unlock switch for 3 seconds or more when the engine switch is off. Tilt/Slide


r.

POWER BACK DOOR SYSTEM

PSD&PBD operation
Display Default Contents Setting
PBD SW Operation 0.8 s Function that turns power back door closer switch on when switch is pushed once or held down for 0.8 sec. 0.8s or ON
PBD Buzzer ON Function that makes the power back door buzzer sound when power back door is operating ON or OFF
Wireless PBD Operation 0.8 s
(1Motion)*
Function that operates power back door when door control transmitter is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or off).
(Function to turn on/off the power back door wireless one motion open operation.)*
1 Oper or 2 Oper or 0.8 s or OFF
(1Motion or 1 Oper or 2 Oper or 0.8 s or OFF)*

HINT:

*: Except Europe



s.

LIGHTING SYSTEM

Main Body
Display Default Contents Setting
Lighting Time 15s To change the lighting time after closing the door. (It will quickly fade out in the case of turning the ignition switch to ON). 7.5s/15s/30s
I/L when ACC OFF ON Function to light the interior light when the ignition switch is turned from ON to off. ON/OFF
I/L ON W/Door Key Unlock ON Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch. ON/OFF
Room Light when Aprchd ON Dome light illumination (when approaching vehicle) ON/OFF
Disp Ex ON Sen Normal Function to change the level of ambient light at which the system dims lights such as the combination meter indicator light, the A/C indicator light and the clock light.*1 Light2/Light1/Normal/Dark1/Dark2
Disp Ex OFF Sen Normal Function to change the level of ambient light at which the system cancels the dimming of lights such as the combination meter indicator light, the A/C indicator light and the clock light.*2 Light2/Light1/Normal/Dark1/Dark2
Sensitivity Normal Function to adjust the ambient light sensitivity of the automatic light control system.*3 Light2/Light1/Normal/Dark1/Dark2

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


*1
E251735E13
0.635,0.635 1.635,0.906 1,0.271 10 false System Setting 0.844,1.313 1.469,1.5 0.625,0.188 10 false Setting 1.979,1.323 2.604,1.51 0.625,0.188 10 false DARK2 2.979,1.323 3.604,1.51 0.625,0.188 10 false DARK1 3.917,1.323 4.542,1.51 0.625,0.188 10 false NORMAL 4.958,1.323 5.583,1.51 0.625,0.188 10 false LIGHT1 5.958,1.323 6.583,1.51 0.625,0.188 10 false LIGHT2 6.021,0.656 6.646,0.844 0.625,0.188 10 false Light 1.958,0.667 2.583,0.854 0.625,0.188 10 false Dark

HINT:

When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.


*2
E251735E13
0.635,0.635 1.635,0.906 1,0.271 10 false System Setting 0.844,1.313 1.469,1.5 0.625,0.188 10 false Setting 1.979,1.323 2.604,1.51 0.625,0.188 10 false DARK2 2.979,1.323 3.604,1.51 0.625,0.188 10 false DARK1 3.917,1.323 4.542,1.51 0.625,0.188 10 false NORMAL 4.958,1.323 5.583,1.51 0.625,0.188 10 false LIGHT1 5.958,1.323 6.583,1.51 0.625,0.188 10 false LIGHT2 6.021,0.656 6.646,0.844 0.625,0.188 10 false Light 1.958,0.667 2.583,0.854 0.625,0.188 10 false Dark

HINT:

When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.


*3
E251735E13
0.635,0.635 1.635,0.906 1,0.271 10 false System Setting 0.844,1.313 1.469,1.5 0.625,0.188 10 false Setting 1.979,1.323 2.604,1.51 0.625,0.188 10 false DARK2 2.979,1.323 3.604,1.51 0.625,0.188 10 false DARK1 3.917,1.323 4.542,1.51 0.625,0.188 10 false NORMAL 4.958,1.323 5.583,1.51 0.625,0.188 10 false LIGHT1 5.958,1.323 6.583,1.51 0.625,0.188 10 false LIGHT2 6.021,0.656 6.646,0.844 0.625,0.188 10 false Light 1.958,0.667 2.583,0.854 0.625,0.188 10 false Dark

HINT:

When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.




CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.


1.

Turn the ignition switch to ON.

2.

Enter the following menus: Setup / Vehicle.

3.

Select the setting by referring to the table below.



a.

TOYOTA PARKING ASSIST-SENSOR SYSTEM

Warning
Display Default Contents Setting
Alert volume 3 Sets the buzzer activation range for the rear center sensors. 1, 2, 3, 4 or 5
Display On The display mode setting (when the TOYOTA parking assist-sensor system is normal). On or Off
Distance Wide Sets the buzzer activation range for the rear center sensors. Narrow or Wide


b.

POWER DOOR LOCK CONTROL SYSTEM

Door lock settings
Display Default Contents Setting
Unlock on second key turn OFF Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. If this setting is OFF, turning the driver side door key cylinder once unlocks all doors. ON/OFF


c.

WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System)

Door lock settings
Display Default Contents Setting
Remote 2-press unlock OFF Function that unlocks the driver side door when the unlock switch on the transmitter is pressed once, and unlocks all doors when the switch is pressed twice. If the setting is OFF, pressing the unlock switch once makes all the doors unlock. ON/OFF
Lock/unlock feedback lights ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice. ON/OFF
Lock feedback volume Level 7 This function changes the wireless buzzer volume. Level 0/Level 1/Level 2/Level 3/Level 4/Level 5/Level6/Level 7


d.

ENTRY AND START SYSTEM (for Entry Function)

Door lock settings
Display Default Contents Setting
Select Doors to Unlock All Doors Function that sets which doors are unlocked by the entry unlock function. All Doors or Driver's Door
Entry and start system On Function that enables or disables the smart key system. On or Off


e.

AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

Air Conditioner
Display Default Contents Setting Relevant ECU
Auto A/C Mode On Enables or disables the function which automatically turns the air conditioning on according to the state of the AUTO switch. On or Off Air conditioning amplifier assembly
Efficient Ventilation Mode On Enables or disables the function which automatically switches between recirculation and fresh air modes when the AUTO switch is on. On or Off Air conditioning amplifier assembly


f.

LIGHTING SYSTEM

Display Default Contents Setting
Interior Lights Off Time 15 s This function controls the interior lights. OFF, 7.5 s, 15 s or 30 s
Light Sensor Sensitivity 0
(middle bar)
Adjusts the ambient light sensitivity of the automatic light control system.* -2, -1, 0, +1 or +2

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


*
E251735E14
0.635,0.635 1.635,0.906 1,0.271 10 false System Setting 0.844,1.313 1.469,1.5 0.625,0.188 10 false Setting 2.188,1.333 2.813,1.521 0.625,0.188 10 false -2 3.156,1.333 3.781,1.521 0.625,0.188 10 false -1 4.188,1.323 4.813,1.51 0.625,0.188 10 false 0 5.115,1.323 5.74,1.51 0.625,0.188 10 false +1 6.104,1.333 6.427,1.521 0.323,0.188 10 false +2 6.021,0.656 6.646,0.844 0.625,0.188 10 false Light 1.958,0.667 2.583,0.854 0.625,0.188 10 false Dark

HINT:

When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.