Home › General › SPECIFICATIONS › 1VD-FTV LUBRICATION
RM2660E _V1 General _052771 SPECIFICATIONS _0254894 1VD-FTV LUBRICATION F

SPECIFICATIONS  1VD-FTV LUBRICATION  SERVICE DATA  


Oil Pressure
Condition Specified Condition
Idle 50 kPa (0.5 kgf/cm2, 7.3 psi) or more
2500 rpm 230 kPa (2.3 kgf/cm2, 33 psi) or more

Oil Pressure Sender Gauge
Test LED Connection Condition Specified Condition
Apply battery positive (+) voltage to the oil pressure sender gauge terminal through a test LED. Engine stopped LED does not illuminate
Engine is running Number of flashes varies with engine speed

Oil Level Sensor
Tester Connection Switch Condition Specified Condition
1 - 2 ON at 20°C (68°F) Below 1 Ω
OFF at 20°C (68°F) Below 1 Ω
ON at 60°C (140°F) Below 1 Ω
OFF at 60°C (140°F) 10 kΩ or higher