RM2660E
_V1
General
_052771
SPECIFICATIONS
_0254898
1GR-FE ENGINE CONTROL
F
SPECIFICATIONS 1GR-FE ENGINE CONTROL SERVICE DATA
IGNITION SYSTEM
| Spark plug
|
Electrode gap for used spark plug
|
Maximum
|
1.3 mm (0.0512 in.)
|
| Electrode gap for new spark plug
|
Standard
|
1.0 to 1.1 mm (0.0394 to 0.0433 in.)
|
CAMSHAFT OIL CONTROL VALVE
| Camshaft timing oil control valve
|
Resistance
|
1 - 2
|
Standard
|
6.9 to 7.9 Ω at 20°C (68°F)
|
THROTTLE BODY
| Throttle body with motor assembly
|
Resistance
|
2 (M+) - 1 (M-)
|
Standard
|
0.3 to 100 Ω at 20°C (68°F)
|
ACCELERATOR PEDAL
| Accel Sens. No.1 Volt %
|
Value
|
Released
|
Standard
|
10 to 22%
|
| Depressed
|
Standard
|
54 to 86%
|
| Accel Sens. No.2 Volt %
|
Value
|
Released
|
Standard
|
12 to 42%
|
| Depressed
|
Standard
|
66 to 98%
|
CRANKSHAFT POSITION SENSOR
| Crankshaft position sensor
|
Resistance
|
1 - 2
|
Standard
|
1630 to 2740 Ω at cold
|
| 2065 to 3225 Ω at hot
|
ENGINE COOLANT TEMPERATURE SENSOR
| Engine coolant temperature sensor
|
Resistance
|
1 - 2
|
Standard
|
2.32 to 2.59 kΩ at Approx. 20°C (68°F)
|
| 0.310 to 0.326 kΩ at Approx. 80°C (176°F)
|
KNOCK SENSOR
| Knock sensor
|
Resistance
|
1 - 2
|
Standard
|
120 to 280 kΩ at 20°C (68°F)
|
AIR FUEL RATIO SENSOR
| Air fuel ratio sensor (for Bank 1)
|
Resistance
|
1 (HA1A) - 2 (+B)
|
Standard
|
1.8 to 3.4 Ω at 20°C (68°F)
|
| Air fuel ratio sensor (for Bank 2)
|
Resistance
|
1 (HA2A) - 2 (+B)
|
Standard
|
1.8 to 3.4 Ω at 20°C (68°F)
|
HEATED OXYGEN SENSOR
| Heated oxygen sensor (for Bank 1)
|
Resistance
|
1 (HT1B) - 2 (+B)
|
Standard
|
11 to 16 Ω at 20°C (68°F)
|
| Heated oxygen sensor (for Bank 2)
|
Resistance
|
1 (HT2B) - 2 (+B)
|
Standard
|
11 to 16 Ω at 20°C (68°F)
|