Home › General › SPECIFICATIONS › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › from 2015.08
RM2660E _V1 General _052771 SPECIFICATIONS _0254910 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS F

SPECIFICATIONS  BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  SERVICE DATA  


Skid Control Buzzer
Item Measurement Condition Specified Condition
Skid control buzzer assembly Battery positive (+) voltage → Terminal 2 Skid control buzzer sounds
Battery negative (-) → Terminal 1

VSC OFF Switch
Item Tester Connection Switch Condition Specified Condition
VSC OFF Switch 3 (E) - 6 (+) Pressed Below 1 Ω
Not Pressed 10 kΩ or higher

CRAWL Switch
Item Tester Connection Switch Condition Specified Condition
CRAWL Switch 15 (SW02) - 10 (E) Speed Selector switch:
Medium
10 kΩ or higher
Speed Selector switch:
Medium-high
Speed Selector switch:
High
Speed Selector switch:
Low
Below 1 Ω
Speed Selector switch:
Medium-low
14 (ECU2) - 10 (E) Speed Selector switch:
Medium-low
10 kΩ or higher
Speed Selector switch:
Medium
Speed Selector switch:
Medium-high
Speed Selector switch:
Low
Below 1 Ω
Speed Selector switch:
High
13 (SW04) - 10 (E) Speed Selector switch:
Low
10 kΩ or higher
Speed Selector switch:
Medium-low
Speed Selector switch:
Medium
Speed Selector switch:
Medium-high
Below 1 Ω
Speed Selector switch:
High
16 (HSW) - 10 (E) ON/OFF switch: Pressed Below 1 Ω
ON/OFF switch: Not pressed 10 kΩ or higher
12 (ECU) - 10 (E) Turn assist function switch: Pressed Below 1 Ω
Turn assist function switch: Not pressed 10 kΩ or higher

BRK LP Relay
Item Tester Connection Condition Specified Condition
BRK LP Relay 3 - 4 Battery positive voltage applied to terminal 1 and battery negative voltage to terminal 2 10 kΩ or higher
Battery positive voltage not applied to terminal 1 and battery negative voltage applied to terminal 2 Below 1 Ω
3 - 5 Battery positive voltage applied to terminal 1 and battery negative voltage to terminal 2 Below 1 Ω
Battery positive voltage not applied to terminal 1 and battery negative voltage applied to terminal 2 10 kΩ or higher