Home › General › SPECIFICATIONS › 3UR-FE FUEL › from 2015.08
RM2660E _V1 General _052771 SPECIFICATIONS _0254943 3UR-FE FUEL F

SPECIFICATIONS  3UR-FE FUEL  SERVICE DATA  


Fuel pressure Standard fuel pressure at idle 281 to 287 kPa
(2.87 to 2.93 kgf/cm2, 41 to 42 psi)
remains for 5 minutes after engine has stopped 147 kPa
(1.5 kgf/cm2, 21 psi) or more
Fuel injector Standard resistance 20°C (68°F) 11.6 to 12.4 Ω
Standard Injection volume 87 to 105 cm3 (5.3 to 6.4 cu in.) per 15 seconds
Difference between each cylinder 18 cm3 (1.1 cu in.) or less
Fuel leakage 1 drop or less per in 12 minutes
Fuel pump Standard resistance 20°C (68°F) 0.2 to 3.0 Ω
Fuel sender gauge assembly Standard Voltage Float position is F (upper) 4.25 to 4.61 V*
Float position is E (lower) 0.34 to 0.70 V*
Fuel sender gauge assembly (for Fuel Sub Tank) Standard Voltage Float position is F (upper) 4.25 to 4.61 V*
Float position is E (lower) 0.34 to 0.70 V*

*: The output voltage changes depending on the voltage applied to the terminals.