Home › General › SPECIFICATIONS › 3UR-FE BATTERY / CHARGING › from 2015.08
RM2660E _V1 General _052771 SPECIFICATIONS _0254949 3UR-FE BATTERY / CHARGING F

SPECIFICATIONS  3UR-FE BATTERY / CHARGING  SERVICE DATA  


GENERATOR
Battery Standard specific gravity 1.25 to 1.29 at 20°C (68°F)
Charging circuit without load Standard current 10 A or less
Standard voltage 10.275 to 16.25 V
(when engine speed at 2000 rpm)
Charging circuit with load Standard current 30 A or higher
Generator rotor Standard resistance Slip ring - Slip ring 1.5 to 1.9 Ω at 20°C (68°F)
Standard resistance Slip ring - Rotor core 10 kΩ or higher
Standard diameter 14.2 to 14.8 mm (0.559 to 0.583 in.)
Minimum diameter 14.0 mm (0.551 in.)
Generator brush holder Standard exposed length 9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum exposed length 4.5 mm (0.177 in.)

HARNESS AND CONNECTOR
Tester Connection Condition Specified Condition
C45-25 (LIN) - D23-2 (LIN) Always Below 1Ω
C45-25 (LIN) - D23-2 (LIN) - Body ground Engine switch off
(while LIN communication stopped)
10 kΩ or higher