Home › General › SPECIFICATIONS › 1UR-FE FUEL › from 2015.08
RM2660E _V1 General _052771 SPECIFICATIONS _0254952 1UR-FE FUEL F

SPECIFICATIONS  1UR-FE FUEL  SERVICE DATA  


FUEL SYSTEM
Standard fuel pressure at idle 321 to 327 kPa (3.27 to 3.33 kgf/cm2, 46.5 to 47.4 psi)
remains for 5 minutes after engine has stopped 147 kPa (1.5 kgf/cm2, 21 psi) or more

FUEL INJECTOR
Standard resistance 1 - 2 20°C (68°F) 11.6 to 12.4 Ω
Standard injection volume 82 to 99 cc (5.0 to 6.0 cu. in.) per 15 seconds
Difference between each fuel injector 17 cc (1.2 cu. in.) or less
Standard fuel drop 1 drop or less in 12 minutes

FUEL PUMP
Standard resistance 1 - 2 20°C (68°F) 0.2 to 3.0 Ω

FUEL SENDER GAUGE ASSEMBLY
Voltage Float position is F (upper) Standard 4.25 to 4.61 V*
Float level is E (Lower) Standard 0.34 to 0.70 V*

*: The output voltage changes depending on the voltage applied to the terminals.

FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)
Voltage Float position is F (upper) Standard 4.25 to 4.61 V*
Float level is E (Lower) Standard 0.34 to 0.70 V*

*: The output voltage changes depending on the voltage applied to the terminals.