Home › General › SPECIFICATIONS › 1UR-FE BATTERY / CHARGING
RM2660E _V1 General _052771 SPECIFICATIONS _0254958 1UR-FE BATTERY / CHARGING F

SPECIFICATIONS  1UR-FE BATTERY / CHARGING  SERVICE DATA  


Battery Standard specific gravity 1.25 to 1.29 at 20°C (68°F)
Charging circuit without load Standard current 10 A or less
Standard voltage 13.2 to 14.8 V
(when engine speed at 2000 rpm)
Charging circuit with load Standard current 30 A or higher
Generator rotor Standard resistance Slip ring - Slip ring
(for 130 A Type)
2.3 to 2.7 Ω at 20°C (68°F)
Slip ring - Slip ring
(for 150 A Type)
1.5 to 1.9 Ω at 20°C (68°F)
Slip ring - Slip ring
(for 180 A Type)
1.36 to 1.76 Ω at 20°C (68°F)
Standard resistance Slip ring - Rotor core
(for 130 A Type)
(for 150 A Type)
10 kΩ or higher
Slip ring - Rotor core
(for 180 A Type)
10 MΩ or higher
Standard diameter 14.2 to 14.8 mm (0.559 to 0.583 in.)
Minimum diameter 14.0 mm (0.551 in.)
Generator brush holder Standard exposed length 9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum exposed length 4.5 mm (0.177 in.)