Home › Engine / Hybrid System › 1UR-FE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE
RM2660E _51 Engine / Hybrid System _052772 1UR-FE ENGINE CONTROL _0254968 CAMSHAFT OIL CONTROL VALVE G

1UR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSPECTION  


PROCEDURE

Hide 15340 1.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 6.9 to 7.9 Ω


If the result is not as specified, replace the camshaft timing oil control valve assembly.


b.
A267615E01
0.072,0.052 0.256,0.214 0.184,0.163 10 *a 2.481,0.043 2.585,0.191 0.104,0.148 10 1 3.297,0.043 3.402,0.191 0.104,0.148 10 2 2.774,0.354 2.677,0.133 2.677,0.133 2.588,0.133 false 3.098,0.354 3.194,0.133 3.194,0.133 3.283,0.133 false

Connect the positive (+) lead of the battery to terminal 1 and the negative (-) lead to terminal 2 and check the movement of the valve.

OK:
Condition Specified Condition
Battery positive (+) voltage is applied Valve moves in left arrow direction shown in the illustration
Battery positive (+) voltage is cut off Valve moves in right arrow direction shown in the illustration


Text in Illustration
*a Component without harness connected
(Camshaft Timing Oil Control Valve)

If the result is not as specified, replace the camshaft timing oil control valve assembly. If the valve cannot return properly because of foreign matter, a small pressure leak in the advanced direction may occur and a DTC may be stored.