Home › Engine / Hybrid System › 1UR-FE (ENGINE CONTROL) › THROTTLE BODY
RM2660E _51 Engine / Hybrid System _052772 1UR-FE ENGINE CONTROL _0254969 THROTTLE BODY G

1UR-FE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22030 1.INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY

a.

Check the throttle valve.

i.

Check that the throttle valve opens and closes smoothly.


ii.

Check that there is no sludge accumulating around the throttle body with motor assembly.



b.

Check the throttle control motor.

i.
A163107E03
0.113,2.51 0.372,2.702 0.259,0.191 10 *a 1.113,3.119 1.538,3.312 0.426,0.192 10 2 (M+) 2.859,3.119 3.274,3.312 0.415,0.192 10 1 (M-) 2.447,3.804 2.766,3.216 2.766,3.216 2.846,3.216 false 2.041,3.804 1.722,3.216 1.722,3.216 1.648,3.216 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω


Text in Illustration
*a Component without harness connected
(Throttle Body with Motor Assembly)

If the result is not as specified, replace the throttle body with motor assembly.