Home › Engine / Hybrid System › 1UR-FE (ENGINE CONTROL) › THROTTLE BODY
RM2660E _51 Engine / Hybrid System _052772 1UR-FE ENGINE CONTROL _0254969 THROTTLE BODY G

1UR-FE ENGINE CONTROL  THROTTLE BODY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 22030 1.CHECK THROTTLE BODY WITH MOTOR ASSEMBLY

a.

Check the throttle control motor operating sounds.

i.

Turn the engine switch on (IG).


ii.

When depressing the accelerator pedal, check the operating sound of the running motor. Make sure that no friction noises are emitted from the motor.

If friction noise exists, replace the throttle body with motor assembly.



b.

Check the throttle position sensor.

i.

Connect the GTS to the DLC3.


ii.

Turn the engine switch on (IG).


iii.

Turn the GTS on.


iv.

Enter the following menus: Powertrain / Engine and ECT / Data List / All Data / Throttle Sensor Position.


v.

Depress the accelerator pedal. When the throttle valve is fully opened, check that the value of "Throttle Sensor Position" is within the specification.

Standard throttle valve opening percentage:

60% or more


HINT:

When checking the standard throttle valve opening percentage, the shift lever should be in N.


If the percentage is less than 60%, replace the throttle body with motor assembly.