Home › Engine / Hybrid System › 1UR-FE (ENGINE CONTROL) › CRANKSHAFT POSITION SENSOR
RM2660E _51 Engine / Hybrid System _052772 1UR-FE ENGINE CONTROL _0254974 CRANKSHAFT POSITION SENSOR A

1UR-FE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11401G 1.INSTALL CRANKSHAFT POSITION SENSOR

a.

Install the crankshaft position sensor with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the crankshaft position sensor connector.


Hide 19312 2.INSTALL CRANKSHAFT POSITION SENSOR PROTECTOR

a.

Install the crankshaft position sensor protector with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 51442 3.INSTALL NO. 2 ENGINE UNDER COVER

a.

Install the No. 2 engine under cover with the 6 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)