Home › Engine / Hybrid System › 1UR-FE (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR
RM2660E _51 Engine / Hybrid System _052772 1UR-FE ENGINE CONTROL _0254976 ENGINE COOLANT TEMPERATURE SENSOR G

1UR-FE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 89422 1.INSPECT ENGINE COOLANT TEMPERATURE SENSOR

A231302E01
6.437,2.41 6.613,2.633 0.175,0.223 10 *2 3.518,0.123 3.722,0.348 0.204,0.225 10 *1 3.724,0.123 3.949,0.348 0.225,0.225 10 kΩ 6.623,2.41 7.088,2.636 0.464,0.225 10 °C (°F) 0.143,0.095 0.347,0.321 0.204,0.225 10 *a 3.977,0.09 4.171,0.252 0.193,0.163 10 30 3.977,0.251 4.152,0.431 0.175,0.180 10 20 3.977,0.462 4.185,0.637 0.208,0.175 10 10 4.005,0.705 4.116,0.881 0.111,0.175 10 5 4.005,0.874 4.120,1.050 0.115,0.175 10 3 4.005,1.035 4.120,1.198 0.115,0.163 10 2 4.005,1.266 4.103,1.429 0.098,0.163 10 1 3.981,1.823 4.212,2.002 0.231,0.180 10 0.2 3.981,1.685 4.207,1.847 0.226,0.163 10 0.3 3.981,1.501 4.201,1.664 0.220,0.163 10 0.5 3.981,2.047 4.212,2.209 0.231,0.163 10 0.1 4.6,2.363 4.705,2.533 0.105,0.170 10 0 4.515,2.498 4.796,2.684 0.281,0.186 10 (32) 4.864,2.363 5.060,2.526 0.196,0.163 10 20 4.81,2.498 5.090,2.677 0.280,0.179 10 (68) 5.171,2.363 5.354,2.517 0.183,0.154 10 40 5.097,2.498 5.449,2.670 0.353,0.172 10 (104) 5.479,2.363 5.669,2.535 0.189,0.172 10 60 5.421,2.498 5.778,2.677 0.357,0.179 10 (140) 5.79,2.363 5.985,2.526 0.195,0.163 10 80 5.74,2.498 6.104,2.684 0.364,0.186 10 (176) 6.065,2.363 6.343,2.535 0.277,0.172 10 100 6.064,2.498 6.426,2.677 0.362,0.179 10 (212) 4.235,2.363 4.472,2.533 0.237,0.170 10 -20 4.235,2.498 4.485,2.675 0.249,0.177 10 (-4) 5.519,0.699 5.713,0.928 0.194,0.229 10 *3 5.089,1.137 5.429,0.796 5.429,0.796 5.507,0.796 false

Text in Illustration
*1 Resistance *2 Temperature
*3 Acceptable Range - -
*a Component without harness connected
(Engine Coolant Temperature Sensor)
- -

a.

Partially immerse the sensor in water and warm up the water.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Approx. 20°C (68°F) 2.32 to 2.59 kΩ
1 - 2 Approx. 80°C (176°F) 0.310 to 0.326 kΩ


If the result is not as specified, replace the engine coolant temperature sensor.

NOTICE:

When checking the sensor in water, keep the terminals dry. After the check, wipe the engine coolant temperature sensor dry.


HINT:

If the result is as specified, do not replace the engine coolant temperature sensor.