Home › Engine / Hybrid System › 1UR-FE (ENGINE CONTROL) › SFI SYSTEM › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052772 1UR-FE ENGINE CONTROL _0254983 SFI SYSTEM C

1UR-FE ENGINE CONTROL  SFI SYSTEM  P0617  Starter Relay Circuit High  


DESCRIPTION

While the engine is being cranked, the positive battery voltage is applied to terminal STA of the ECM. If the ECM detects the starter control (STA) signal while the vehicle is being driven, it determines that there is a malfunction in the STA circuit. The ECM then illuminates the MIL and stores the DTC.

This monitor runs when the vehicle is driven at 20 km/h (12.4 mph) for over 20 seconds.

DTC No. DTC Detection Condition Trouble Area
P0617 Conditions (a), (b) and (c) are met, and a positive (+B) battery voltage of 10.5 V or higher is applied to the ECM for 20 seconds (1 trip detection logic).

(a) Vehicle speed is 24 km/h (15 mph) or more.

(b) Engine speed is 1000 rpm or more.

(c) STA signal is on.


·

Park/neutral position switch assembly

·

Starter relay (ST) circuit

·

Main body ECU

·

ECM



CONFIRMATION DRIVING PATTERN

A231469E01
1.226,1.979 1.604,2.156 0.378,0.177 10 Idling 0.68,2.238 1.655,2.561 0.975,0.323 10 Engine Switch on (IG) 0.435,0.813 1.601,1.194 1.166,0.382 10 24 km/h (15 mph) 2.393,2.851 3.076,3.167 0.684,0.316 10 5 seconds or more 3.427,2.938 4.699,3.103 1.272,0.165 10 20 seconds or more 2.004,2.336 2.197,2.525 0.193,0.188 10 [A] 2.586,2.125 2.796,2.297 0.210,0.172 10 [B] 4.03,0.457 4.257,0.625 0.227,0.168 10 [C] 4.905,3.342 5.139,3.510 0.234,0.168 10 [D]

1.

Connect the GTS to the DLC3.

2.

Turn the engine switch on (IG) and turn the GTS on.

3.

Clear the DTCs (even if no DTCs are stored, perform the clear DTC operation).

4.

Turn the engine switch off and wait for at least 30 seconds.

5.

Turn the engine switch on (IG) and turn the GTS on [A].

6.

Idle the engine for 5 seconds or more [B].

7.

Drive the vehicle at 24 km/h (15 mph) or more for 20 seconds or more [C].

CAUTION:

When performing the confirmation driving pattern, obey all speed limits and traffic laws.


8.

Enter the following menus: Powertrain / Engine and ECT / Trouble Codes [D].

9.

Read the pending DTCs.

HINT:
·

If a pending DTC is output, the system is malfunctioning.

·

If a pending DTC is not output, perform the following procedure.



10.

Enter the following menus: Powertrain / Engine and ECT / Utility / All Readiness.

11.

Input the DTC: P0617.

12.

Check the DTC judgment result.

GTS Display Description
NORMAL
·

DTC judgment completed

·

System normal


ABNORMAL
·

DTC judgment completed

·

System abnormal


INCOMPLETE
·

DTC judgment not completed

·

Perform driving pattern after confirming DTC enabling conditions


N/A
·

Unable to perform DTC judgment

·

Number of DTCs which do not fulfill DTC preconditions has reached ECU memory limit



HINT:
·

If the judgment result shows NORMAL, the system is normal.

·

If the judgment result shows ABNORMAL, the system has a malfunction.

·

If the judgment result shows INCOMPLETE or N/A, perform steps [C] and [D] again and, if necessary, extend the driving time.




WIRING DIAGRAM

U163172E02
5.677,2.448 6.135,2.604 0.458,0.156 10 false STSW 5.677,2.792 6.135,2.948 0.458,0.156 10 false ACCR 5.677,3.125 6.135,3.281 0.458,0.156 10 false STAR 2.469,2.448 2.927,2.604 0.458,0.156 10 false STSW 2.469,2.792 2.927,2.948 0.458,0.156 10 false ACCR 2.51,3.125 2.969,3.281 0.458,0.156 10 false STR2 2.594,3.458 2.969,3.615 0.375,0.156 10 false STR 4.74,1.552 5.031,1.729 0.292,0.177 10 false IGN 2.948,0.406 3.219,0.563 0.271,0.156 10 false IG2 1.99,0.573 2.625,0.75 0.635,0.177 10 false IG2 MAIN 2.083,1.479 3.604,1.667 1.521,0.188 10 false No. 1 Integration Relay 2.563,2.115 2.927,2.292 0.365,0.177 10 false IG2D 2.01,3.875 3.021,4.063 1.01,0.188 10 false Main Body ECU 4.927,4.104 5.469,4.26 0.542,0.156 10 false ST CUT 2.729,5.542 4.604,5.708 1.875,0.167 10 false Park/Neutral Position Switch 1.625,4.49 1.854,4.646 0.229,0.156 10 false ST 5.698,5.229 6.073,5.406 0.375,0.177 10 false NSW 5.698,5.802 6.01,5.958 0.313,0.156 10 false STA 5.917,6.542 6.271,6.708 0.354,0.167 10 false ECM 3.427,6.854 3.646,7.01 0.219,0.156 10 false ST 4.719,7.604 5.188,7.781 0.469,0.177 10 false Starter 1.042,8.031 1.542,8.229 0.5,0.198 10 false Battery 5.344,2.479 5.656,2.635 0.313,0.156 10 false A38 5.344,2.823 5.656,2.979 0.313,0.156 10 false A38 5.344,3.156 5.656,3.313 0.313,0.156 10 false C45 5.323,5.26 5.635,5.417 0.313,0.156 10 false C45 5.344,5.833 5.656,5.99 0.313,0.156 10 false A38 5.323,2.281 5.635,2.448 0.313,0.167 10 false 14*2 5.323,2.656 5.635,2.813 0.313,0.156 10 false 41*2 5.323,2.99 5.656,3.146 0.333,0.156 10 false 16*2 5.25,5.063 5.667,5.219 0.417,0.156 10 false 120*2 5.323,5.635 5.667,5.792 0.344,0.156 10 false 46*2 4.74,3.688 4.844,3.833 0.104,0.146 10 false 2 4.74,4.469 4.844,4.615 0.104,0.146 10 false 1 4.417,3.688 4.542,3.854 0.125,0.167 10 false 5 4.417,4.479 4.542,4.646 0.125,0.167 10 false 3 3.885,6.438 4.01,6.604 0.125,0.167 10 false 3 2.729,5.406 3.01,5.573 0.281,0.167 10 false C24 3.885,5.125 3.99,5.281 0.104,0.156 10 false 4 3.125,5.125 3.229,5.281 0.104,0.156 10 false 5 3.125,6.448 3.229,6.604 0.104,0.156 10 false 5 1.354,4.354 1.458,4.51 0.104,0.156 10 false 1 3.115,6.146 3.219,6.302 0.104,0.156 10 false 2 4.094,7.198 4.198,7.354 0.104,0.156 10 false 1 4.479,7 4.583,7.156 0.104,0.156 10 false 1 1.354,4.615 1.469,4.781 0.115,0.167 10 false 2 4.531,1.417 4.635,1.573 0.104,0.156 10 false 1 4.531,1.667 4.646,1.833 0.115,0.167 10 false 2 3.896,6.146 4.01,6.313 0.115,0.167 10 false 1 4.365,7.188 4.573,7.344 0.208,0.156 10 false D2 4.01,7.396 4.344,7.552 0.333,0.156 10 false D21 3.031,3.49 3.219,3.646 0.188,0.156 10 false E1 3.031,3.156 3.24,3.313 0.208,0.156 10 false E4 3.021,2.479 3.229,2.635 0.208,0.156 10 false E4 3.031,2.146 3.24,2.302 0.208,0.156 10 false E2 3.021,2.813 3.229,2.969 0.208,0.156 10 false E2 3.042,1.948 3.219,2.104 0.177,0.156 10 false 11 3.083,2.313 3.208,2.469 0.125,0.156 10 false 4 3.083,2.656 3.208,2.813 0.125,0.156 10 false 3 3.083,2.99 3.208,3.146 0.125,0.156 10 false 6 3.083,3.313 3.208,3.469 0.125,0.156 10 false 8 3.625,0.75 3.833,0.896 0.208,0.146 10 false 1B 3.625,1.073 3.833,1.219 0.208,0.146 10 false 1B 1.615,1.073 1.823,1.219 0.208,0.146 10 false 1B 1.615,0.74 1.823,0.885 0.208,0.146 10 false 1C 1.646,0.563 1.76,0.719 0.115,0.156 10 false 1 1.667,0.917 1.771,1.063 0.104,0.146 10 false 7 3.677,0.542 3.792,0.688 0.115,0.146 10 false 8 3.677,0.906 3.792,1.052 0.115,0.146 10 false 6 5,2.479 5.313,2.635 0.313,0.156 10 false A52 5,2.823 5.313,2.979 0.313,0.156 10 false A52 5,3.156 5.313,3.313 0.313,0.156 10 false C46 4.99,5.271 5.302,5.427 0.313,0.156 10 false C46 5,5.833 5.313,5.99 0.313,0.156 10 false A52 4.969,2.281 5.281,2.448 0.313,0.167 10 false 14*1 4.969,2.656 5.281,2.813 0.313,0.156 10 false 41*1 4.958,2.99 5.292,3.146 0.333,0.156 10 false 16*1 4.844,5.063 5.26,5.219 0.417,0.156 10 false 120*1 4.969,5.635 5.313,5.792 0.344,0.156 10 false 46*1 5.677,7.448 6.458,7.594 0.781,0.146 10 false *1: for RHD 5.677,7.719 6.458,7.865 0.781,0.146 10 false *2: for LHD 3.292,5.156 3.396,5.313 0.104,0.156 10 false L 3.708,5.167 3.833,5.323 0.125,0.156 10 false B

U163173E02
5.677,2.448 6.135,2.604 0.458,0.156 10 false STSW 5.677,2.792 6.135,2.948 0.458,0.156 10 false ACCR 5.677,3.125 6.135,3.281 0.458,0.156 10 false STAR 2.469,2.448 2.927,2.604 0.458,0.156 10 false STSW 2.469,2.792 2.927,2.948 0.458,0.156 10 false ACCR 2.51,3.125 2.969,3.281 0.458,0.156 10 false STR2 2.594,3.458 2.969,3.615 0.375,0.156 10 false STR 4.74,1.552 5.031,1.729 0.292,0.177 10 false IGN 2.948,0.406 3.219,0.563 0.271,0.156 10 false IG2 1.99,0.573 2.625,0.75 0.635,0.177 10 false IG2 MAIN 2.083,1.479 3.604,1.667 1.521,0.188 10 false No. 1 Integration Relay 2.563,2.115 2.927,2.292 0.365,0.177 10 false IG2D 2.01,3.844 3.021,4.031 1.01,0.188 10 false Main Body ECU 4.927,4.104 5.469,4.26 0.542,0.156 10 false ST CUT 2.729,5.542 4.604,5.708 1.875,0.167 10 false Park/Neutral Position Switch 1.625,4.49 1.854,4.646 0.229,0.156 10 false ST 5.698,5.229 6.073,5.406 0.375,0.177 10 false NSW 5.698,5.802 6.01,5.958 0.313,0.156 10 false STA 5.917,6.583 6.271,6.75 0.354,0.167 10 false ECM 3.427,6.854 3.646,7.01 0.219,0.156 10 false ST 4.719,7.604 5.188,7.781 0.469,0.177 10 false Starter 1.042,8.031 1.542,8.229 0.5,0.198 10 false Battery 5.344,2.49 5.656,2.646 0.313,0.156 10 false A38 5.344,2.823 5.656,2.979 0.313,0.156 10 false A38 5.344,3.156 5.656,3.313 0.313,0.156 11 false C45 5.344,5.26 5.656,5.417 0.313,0.156 10 false C45 5.344,5.823 5.656,5.979 0.313,0.156 10 false A38 5.323,2.281 5.635,2.448 0.313,0.167 10 false 14*2 5.313,2.677 5.625,2.833 0.313,0.156 10 false 41*2 5.344,2.979 5.677,3.135 0.333,0.156 10 false 16*2 5.25,5.063 5.667,5.219 0.417,0.156 10 false 120*2 5.323,5.635 5.667,5.792 0.344,0.156 10 false 46*2 4.74,3.688 4.844,3.833 0.104,0.146 10 false 2 4.74,4.469 4.844,4.615 0.104,0.146 10 false 1 4.417,3.688 4.542,3.854 0.125,0.167 10 false 5 4.417,4.479 4.542,4.646 0.125,0.167 10 false 3 3.885,6.438 4.01,6.604 0.125,0.167 10 false 3 2.729,5.406 3.01,5.573 0.281,0.167 10 false C24 3.885,5.125 3.99,5.281 0.104,0.156 10 false 4 3.125,5.125 3.229,5.281 0.104,0.156 10 false 5 3.125,6.448 3.229,6.604 0.104,0.156 10 false 5 1.354,4.354 1.458,4.51 0.104,0.156 10 false 1 2.99,6.146 3.229,6.302 0.24,0.156 10 false 1*3 4.094,7.198 4.198,7.354 0.104,0.156 10 false 1 4.479,7 4.583,7.156 0.104,0.156 10 false 1 1.354,4.615 1.469,4.781 0.115,0.167 10 false 2 4.531,1.417 4.635,1.573 0.104,0.156 10 false 1 4.531,1.667 4.646,1.833 0.115,0.167 10 false 2 3.896,6.146 4.167,6.313 0.271,0.167 10 false 2*3 4.354,7.167 4.563,7.323 0.208,0.156 10 false D2 4.01,7.365 4.344,7.521 0.333,0.156 10 false D21 3.042,3.49 3.229,3.646 0.188,0.156 10 false E1 3.031,3.167 3.24,3.323 0.208,0.156 10 false E4 3.031,2.479 3.24,2.635 0.208,0.156 10 false E4 3.031,2.146 3.24,2.302 0.208,0.156 10 false E2 3.031,2.813 3.24,2.969 0.208,0.156 10 false E2 3.042,1.948 3.219,2.104 0.177,0.156 10 false 11 3.083,2.313 3.208,2.469 0.125,0.156 10 false 4 3.073,2.656 3.198,2.813 0.125,0.156 10 false 3 3.073,2.99 3.198,3.146 0.125,0.156 10 false 6 3.083,3.323 3.208,3.479 0.125,0.156 10 false 8 3.625,0.729 3.833,0.875 0.208,0.146 10 false 1B 3.625,1.073 3.833,1.219 0.208,0.146 10 false 1B 1.615,1.073 1.823,1.219 0.208,0.146 10 false 1B 1.615,0.74 1.823,0.885 0.208,0.146 10 false 1C 1.656,0.531 1.771,0.688 0.115,0.156 10 false 1 1.667,0.906 1.771,1.052 0.104,0.146 10 false 7 3.677,0.542 3.792,0.688 0.115,0.146 10 false 8 3.677,0.906 3.792,1.052 0.115,0.146 10 false 6 5,2.479 5.313,2.635 0.313,0.156 10 false A52 5,2.823 5.313,2.979 0.313,0.156 10 false A52 5,3.146 5.313,3.302 0.313,0.156 10 false C46 5,5.26 5.313,5.417 0.313,0.156 10 false C46 5,5.833 5.313,5.99 0.313,0.156 10 false A52 4.969,2.281 5.281,2.448 0.313,0.167 10 false 14*1 4.969,2.656 5.281,2.813 0.313,0.156 10 false 41*1 4.969,2.99 5.302,3.146 0.333,0.156 10 false 16*1 4.844,5.063 5.26,5.219 0.417,0.156 10 false 120*1 4.969,5.635 5.313,5.792 0.344,0.156 10 false 46*1 5.677,7.448 6.458,7.594 0.781,0.146 10 false *1: for RHD 5.677,7.729 6.458,7.875 0.781,0.146 10 false *2: for LHD 3.292,5.156 3.396,5.313 0.104,0.156 10 false L 3.719,5.167 3.844,5.323 0.125,0.156 10 false B 5.677,8.021 7.156,8.167 1.479,0.146 10 false *3: URJ202L-GNTEKC

CAUTION / NOTICE / HINT

HINT:
·

The following troubleshooting flowchart is based on the premise that the engine can be cranked normally.

If the engine does not crank, proceed to Problem Symptoms Table (See page Engine / Hybrid System>1UR-FE (ENGINE CONTROL)>SFI SYSTEM>PROBLEM SYMPTOMS TABLE).

·

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air-fuel ratio was lean or rich, and other data from the time the malfunction occurred.



PROCEDURE

1.READ VALUE USING GTS (STARTER SIGNAL)
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG) and turn the GTS on.


c.

Enter the following menus: Powertrain / Engine and ECT / Data List / Starter Signal.


d.

Check the value displayed on the GTS when the engine switch is turned on (IG) and when the engine is started.

OK:
Condition Starter Signal
Engine switch turned on (IG) OFF
Engine started ON




OK

NG

2.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
2.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
a.

Inspect the park/neutral position switch assembly (See page Drivetrain>AB60F (AUTOMATIC TRANSMISSION / TRANSAXLE)>PARK / NEUTRAL POSITION SWITCH>INSPECTION).



OK

3.REPAIR OR REPLACE HARNESS AND CONNECTOR (PARK/NEUTRAL POSITION SWITCH - ECM)

NG

3.REPAIR OR REPLACE HARNESS AND CONNECTOR (PARK/NEUTRAL POSITION SWITCH - ECM)

NEXT

4.CHECK WHETHER DTC OUTPUT RECURS
4.CHECK WHETHER DTC OUTPUT RECURS
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.



e.

Drive the vehicle at more than 24 km/h (15 mph) for more than 20 seconds.


f.

Enter the following menus: Powertrain / Engine and ECT / Trouble Code.


g.

Read DTCs.

Result
Display (DTC Output) Proceed to
P0617 A
No DTC B



A

B

END