Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › ACTIVE CONTROL ENGINE MOUNT
RM2660E _51 Engine / Hybrid System _052773 1VD-FTV ENGINE CONTROL _0254994 ACTIVE CONTROL ENGINE MOUNT G

1VD-FTV ENGINE CONTROL  ACTIVE CONTROL ENGINE MOUNT  INSPECTION  


PROCEDURE

Hide 1.INSPECT FRONT ENGINE MOUNTING INSULATOR

a.
A176594

Visually check the front engine mounting insulator for leaks.

If the fluid leaks, replace the front engine mounting insulator.


Hide 2.INSPECT FRONT ENGINE MOUNTING INSULATOR

a.
U163246E01
1.531,1.355 2.059,1.537 0.527,0.182 10 Vacuum

Connect a vacuum pump to the engine mount insulator.


b.

Using the vacuum pump, apply a vacuum of 80 kPa (600 mmHg. 25 in.Hg) and wait for 1 minute.


c.

Check that there is no change in the needle movement of the vacuum pump gauge.

If the result is not as specified, replace the front engine mounting insulator.