Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › AIR FUEL RATIO SENSOR
RM2660E _51 Engine / Hybrid System _052773 1VD-FTV ENGINE CONTROL _0255000 AIR FUEL RATIO SENSOR G

1VD-FTV ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

a.
A226559E07
0.594,0.443 0.824,0.594 0.230,0.151 10 +B 2.606,0.446 3.030,0.596 0.424,0.150 10 HAF1 0.422,1.578 0.787,1.732 0.365,0.154 10 AF1- 0.867,0.53 0.996,0.53 0.996,0.53 1.458,0.841 false 0.867,1.66 0.996,1.66 0.996,1.66 1.458,1.348 false 2.544,0.53 2.416,0.53 2.416,0.53 1.953,0.841 false 0.069,0.078 0.254,0.233 0.185,0.155 10 *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HAF1) - 2 (+B) 20°C (68°F) 1.8 to 3.4 Ω
1 (HAF1) - 4 (AF1-) Always 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Air Fuel Ratio Sensor)

If the result is not as specified, replace the air fuel ratio sensor.


Hide 89467B 2.INSPECT AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)

a.
A272501E01
0.146,0.067 0.388,0.294 0.242,0.227 12 *a 0.555,0.6 0.753,0.752 0.198,0.153 10 +B 0.375,1.546 0.719,1.698 0.344,0.153 10 AF2- 2.641,0.6 3.036,0.752 0.395,0.153 10 HAF2 1.991,0.963 2.464,0.684 2.464,0.684 2.62,0.684 false 1.41,1.35 0.937,1.629 0.937,1.629 0.781,1.629 false 1.41,0.963 0.937,0.684 0.937,0.684 0.781,0.684 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HAF2) - 2 (+B) 20°C (68°F) 1.8 to 3.4 Ω
1 (HAF2) - 4 (AF2-) Always 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Air Fuel Ratio Sensor)

If the result is not as specified, replace the air fuel ratio sensor.