Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › SFI SYSTEM › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052774 1GR-FE ENGINE CONTROL _0255001 SFI SYSTEM U

1GR-FE ENGINE CONTROL  SFI SYSTEM  TERMINALS OF ECM  


U163199E01
2.325,0.568 2.480,0.722 0.155,0.153 10 *1 3.1,0.568 3.256,0.722 0.155,0.153 10 *2 0.216,3.035 1.011,3.210 0.795,0.174 10 *1: for LHD 0.216,3.381 1.011,3.555 0.795,0.174 10 *2: for RHD 2.728,0.699 3.019,0.851 0.290,0.152 10 C46 1.966,0.699 2.257,0.851 0.290,0.152 10 C45 5.52,0.568 5.675,0.722 0.155,0.153 10 *1 6.295,0.568 6.450,0.722 0.155,0.153 10 *2 5.923,0.699 6.213,0.851 0.290,0.152 10 A52 5.16,0.699 5.451,0.851 0.290,0.152 10 A38

Measure the voltage according to the value(s) in the table below.

HINT:

The standard voltage between each pair of ECM terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage for that pair of terminals, which is displayed in the "Specified Condition" column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A38*1-1 (BATT) - C45*1-81 (E1)
A52*2-1 (BATT) - C46*2-81 (E1)
L - BR Battery (for measuring the battery voltage and for the ECM memory) Always 11 to 14 V
C45*1-41 (+BM) - C45*1-81 (E1)
C46*2-41 (+BM) - C46*2-81 (E1)
P - BR Power source of throttle motor Always 11 to 14 V
A38*1-28 (IGSW) - C45*1-81 (E1)
A52*2-28 (IGSW) - C46*2-81 (E1)
B - BR Ignition switch Ignition switch ON 11 to 14 V
A38*1-3 (+B) - C45*1-81 (E1)
A52*2-3 (+B) - C46*2-81 (E1)
B - BR Power source of ECM Ignition switch ON 11 to 14 V
A38*1-2 (+B2) - C45*1-81 (E1)
A52*2-2 (+B2) - C46*2-81 (E1)
B - BR Power source of ECM Ignition switch ON 11 to 14 V
C45*1-58 (OC1+) - C45*1-57 (OC1-)
C46*2-58 (OC1+) - C46*2-57 (OC1-)
L-B - R-B Camshaft timing oil control valve (for intake side of bank 1) Ignition switch ON Pulse generation
(See waveform 1)
C45*1-52 (OC2+) - C45*1-51 (OC2-)
C46*2-52 (OC2+) - C46*2-51 (OC2-)
B - B-L Camshaft timing oil control valve (for intake side bank 2) Ignition switch ON Pulse generation
(See waveform 1)
C45*1-56 (OE1+) - C45*1-55 (OE1-)
C46*2-56 (OE1+) - C46*2-55 (OE1-)
G-W - B-R Camshaft timing oil control valve (for exhaust side of bank 1) Ignition switch ON Pulse generation
(See waveform 1)
C45*1-50 (OE2+) - C45*1-49 (OE2-)
C46*2-50 (OE2+) - C46*2-49 (OE2-)
R-W - L-W Camshaft timing oil control valve (for exhaust side of bank 2) Ignition switch ON Pulse generation
(See waveform 1)
A38*1-34 (MREL) - C45*1-81 (E1)
A52*2-34 (MREL) - C46*2-81 (E1)
W-R - BR EFI relay Ignition switch ON 11 to 14 V
C45*1-67 (VCV1) - C45*1-97 (ETHW)
C46*2-67 (VCV1) - C46*2-97 (ETHW)
L - BR Power source of sensor (specific voltage) Ignition switch ON 4.5 to 5.5 V
C45*1-66 (VCV2) - C45*1-98 (ETHA)
C46*2-66 (VCV2) - C46*2-98 (ETHA)
L - BR Power source of sensor (specific voltage) Ignition switch ON 4.5 to 5.5 V
C45*1-74 (VG) - C45*1-75 (E2G)
C46*2-74 (VG) - C46*2-75 (E2G)
L-Y - G-W Mass air flow meter Idling, shift lever position P or N, A/C switch off 0.5 to 3.0 V
C45*1-73 (THA) - C45*1-98 (ETHA)
C46*2-73 (THA) - C46*2-98 (ETHA)
Y-B - BR Intake air temperature sensor Idling, intake air temperature 20°C (68°F) 0.5 to 3.4 V
C45*1-76 (THW) - C45*1-97 (ETHW)
C46*2-76 (THW) - C46*2-97 (ETHW)
G-B - BR Engine coolant temperature sensor Idling, engine coolant temperature 80°C (176°F) 0.2 to 1.0 V
C45*1-80 (VCTA) - C45*1-79 (ETA)
C46*2-80 (VCTA) - C46*2-79 (ETA)
L - B Power source of throttle position sensor (specific voltage) Ignition switch ON 4.5 to 5.5 V
C45*1-78 (VTA1) - C45*1-79 (ETA)
C46*2-78 (VTA1) - C46*2-79 (ETA)
R-Y - B Throttle position sensor (for engine control) Ignition switch ON, throttle valve fully closed 0.5 to 1.2 V
Ignition switch ON, throttle valve fully open 3.2 to 4.8 V
C45*1-77 (VTA2) - C45*1-79 (ETA)
C46*2-77 (VTA2) - C46*2-79 (ETA)
Y-B - B Throttle position sensor (for sensor malfunction detection) Ignition switch ON, throttle valve fully closed 2.1 to 3.1 V
Ignition switch ON, throttle valve fully open 4.5 to 5.0 V
A38*1-55 (VPA) - A38*1-58 (EPA)
A52*2-55 (VPA) - A52*2-58 (EPA)
R - W
R - W-L*4
Accelerator pedal position sensor (for engine control) Ignition switch ON, accelerator pedal fully released 0.5 to 1.1 V
Ignition switch ON, accelerator pedal fully depressed 2.6 to 4.5 V
A38*1-56 (VPA2) - A38*1-60 (EPA2)
A52*2-56 (VPA2) - A52*2-60 (EPA2)
GR - BE
GR-G - BR*4
Accelerator pedal position sensor (for sensor malfunction detection) Ignition switch ON, accelerator pedal fully released 1.2 to 2.0 V
Ignition switch ON, accelerator pedal fully depressed 3.4 to 5.0 V
A38*1-57 (VCPA) - A38*1-58 (EPA)
A52*2-57 (VCPA) - A52*2-58 (EPA)
L - W
L-W - W-L*4
Power source of accelerator pedal position sensor (for VPA) Ignition switch ON 4.5 to 5.5 V
A38*1-59 (VCP2) - A38*1-60 (EPA2)
A52*2-59 (VCP2) - A52*2-60 (EPA2)
V - BE
V - BR*4
Power source of accelerator pedal position sensor (for VPA2) Ignition switch ON 4.5 to 5.5 V
C45*1-22 (HA1A) - C45*1-23 (E04)
C46*2-22 (HA1A) - C46*2-23 (E04)
L-R - W-B Air fuel ratio sensor heater Idling with warm engine Pulse generation
(See waveform 16)
Ignition switch ON 11 to 14 V
C45*1-20 (HA2A) - C45*1-21 (E05)
C46*2-20 (HA2A) - C46*2-21 (E05)
G - W-B Air fuel ratio sensor heater Idling with warm engine Pulse generation
(See waveform 16)
Ignition switch ON 11 to 14 V
C45*1-126 (A1A+) - C45*1-81 (E1)
C46*2-126 (A1A+) - C46*2-81 (E1)
G - BR Air fuel ratio sensor Ignition switch ON 3.3 V*3
C45*1-103 (A2A+) - C45*1-81 (E1)
C46*2-103 (A2A+) - C46*2-81 (E1)
V - BR Air fuel ratio sensor Ignition switch ON 3.3 V*3
C45*1-125 (A1A-) - C45*1-81 (E1)
C46*2-125 (A1A-) - C46*2-81 (E1)
R - BR Air fuel ratio sensor Ignition switch ON 2.9 V*3
C45*1-102 (A2A-) - C45*1-81 (E1)
C46*2-102 (A2A-) - C46*2-81 (E1)
P - BR Air fuel ratio sensor Ignition switch ON 2.9 V*3
C45*1-45 (HT1B) - C45*1-46 (E03)
C46*2-45 (HT1B) - C46*2-46 (E03)
G - W-B Heated oxygen sensor heater Idling Below 3.0 V
Ignition switch ON 11 to 14 V
C45*1-44 (HT2B) - C45*1-46 (E03)
C46*2-44 (HT2B) - C46*2-46 (E03)
B - W-B Heated oxygen sensor heater Idling Below 3.0 V
Ignition switch ON 11 to 14 V
C45*1-114 (OX1B) - C45*1-115 (EX1B)
C46*2-114 (OX1B) - C46*2-115 (EX1B)
W - B-R Heated oxygen sensor Engine speed maintained at 2500 rpm for 2 minutes after warming up engine Pulse generation
(See waveform 2)
C45*1-112 (OX2B) - C45*1-113 (EX2B)
C46*2-112 (OX2B) - C46*2-113 (EX2B)
B - BR Heated oxygen sensor Engine speed maintained at 2500 rpm for 2 minutes after warming up engine Pulse generation
(See waveform 2)
C45*1-86 (#10) - C45*1-43 (E01)
C46*2-86 (#10) - C46*2-43 (E01)
R-L - W-B Fuel injector Ignition switch ON 11 to 14 V
Idling Pulse generation
(See waveform 3)
C45*1-109 (#20) - C45*1-43 (E01)
C46*2-109 (#20) - C46*2-43 (E01)
L - W-B Fuel injector Ignition switch ON 11 to 14 V
Idling Pulse generation
(See waveform 3)
C45*1-85 (#30) - C45*1-43 (E01)
C46*2-85 (#30) - C46*2-43 (E01)
R-B - W-B Fuel injector Ignition switch ON 11 to 14 V
Idling Pulse generation
(See waveform 3)
C45*1-108 (#40) - C45*1-43 (E01)
C46*2-108 (#40) - C46*2-43 (E01)
Y - W-B Fuel injector Ignition switch ON 11 to 14 V
Idling Pulse generation
(See waveform 3)
C45*1-84 (#50) - C45*1-43 (E01)
C46*2-84 (#50) - C46*2-43 (E01)
G - W-B Fuel injector Ignition switch ON 11 to 14 V
Idling Pulse generation
(See waveform 3)
C45*1-107 (#60) - C45*1-43 (E01)
C46*2-107 (#60) - C46*2-43 (E01)
R - W-B Fuel injector Ignition switch ON 11 to 14 V
Idling Pulse generation
(See waveform 3)
C45*1-94 (KNK1) - C45*1-93 (EKNK)
C46*2-94 (KNK1) - C46*2-93 (EKNK)
G - R Knock sensor (bank 1) Engine speed maintained at 4000 rpm after warming up engine Pulse generation
(See waveform 4)
C45*1-117 (KNK2) - C45*1-116 (EKN2)
C46*2-117 (KNK2) - C46*2-116 (EKN2)
W - B Knock sensor (bank 2) Engine speed maintained at 4000 rpm after warming up engine Pulse generation
(See waveform 4)
C45*1-90 (VV1+) - C45*1-89 (VV1-)
C46*2-90 (VV1+) - C46*2-89 (VV1-)
R - L-R VVT sensor (intake side of bank 1) Idling Pulse generation
(See waveform 5)
C45*1-87 (VV2+) - C45*1-88 (VV2-)
C46*2-87 (VV2+) - C46*2-88 (VV2-)
R - G VVT sensor (intake side of bank 2) Idling Pulse generation
(See waveform 5)
C45*1-69 (EV1+) - C45*1-68 (EV1-)
C46*2-69 (EV1+) - C46*2-68 (EV1-)
L-B - L-W VVT sensor (exhaust side of bank 1) Idling Pulse generation
(See waveform 15)
C45*1-64 (EV2+) - C45*1-65 (EV2-)
C46*2-64 (EV2+) - C46*2-65 (EV2-)
G-W - R-W VVT sensor (exhaust side of bank 2) Idling Pulse generation
(See waveform 15)
C45*1-110 (NE+) - C45*1-111 (NE-)
C46*2-110 (NE+) - C46*2-111 (NE-)
B - W Crankshaft position sensor Idling Pulse generation
(See waveform 5)
C45*1-40 (IGT1) - C45*1-81 (E1)
C46*2-40 (IGT1) - C46*2-81 (E1)
B-R - BR Ignition coil
(ignition signal)
Idling Pulse generation
(See waveform 6)
C45*1-39 (IGT2) - C45*1-81 (E1)
C46*2-39 (IGT2) - C46*2-81 (E1)
L-B - BR Ignition coil
(ignition signal)
Idling Pulse generation
(See waveform 6)
C45*1-38 (IGT3) - C45*1-81 (E1)
C46*2-38 (IGT3) - C46*2-81 (E1)
B - BR Ignition coil
(ignition signal)
Idling Pulse generation
(See waveform 6)
C45*1-37 (IGT4) - C45*1-81 (E1)
C46*2-37 (IGT4) - C46*2-81 (E1)
L-B - BR Ignition coil
(ignition signal)
Idling Pulse generation
(See waveform 6)
C45*1-36 (IGT5) - C45*1-81 (E1)
C46*2-36 (IGT5) - C46*2-81 (E1)
G-R - BR Ignition coil
(ignition signal)
Idling Pulse generation
(See waveform 6)
C45*1-35 (IGT6) - C45*1-81 (E1)
C46*2-35 (IGT6) - C46*2-81 (E1)
G - BR Ignition coil
(ignition signal)
Idling Pulse generation
(See waveform 6)
C45*1-104 (IGF1) - C45*1-81 (E1)
C46*2-104 (IGF1) - C46*2-81 (E1)
G-B - BR Ignition coil
(ignition confirmation signal)
Ignition switch ON 4.5 to 5.5 V
Idling Pulse generation
(See waveform 6)
C45*1-63 (PRG) - C45*1-81 (E1)
C46*2-63 (PRG) - C46*2-81 (E1)
L-B - BR Purge VSV Ignition switch ON 11 to 14 V
Idling Pulse generation
(See waveform 7)
A38*1-13 (SPD) - C45*1-81 (E1)
A52*2-13 (SPD) - C46*2-81 (E1)
V -BR
V-R - BR*4
Speed signal from combination meter Ignition switch ON, driving wheels rotated slowly Pulse generation
(See waveform 8)
A38*1-46 (STA) - C45*1-81 (E1)
A52*2-46 (STA) - C46*2-81 (E1)
R - BR
R-B - BR*4
Starter signal Cranking 6.0 V or higher
A38*1-36 (STP) - C45*1-81 (E1)
A52*2-36 (STP) - C46*2-81 (E1)
R - BR Stop light switch Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1.5 V
A38*1-35 (ST1-) - C45*1-81 (E1)
A52*2-35 (ST1-) - C46*2-81 (E1)
P - BR
R-W - BR*4
Stop light switch (opposite to STP terminal) Ignition switch ON, brake pedal depressed Below 1.5 V
Ignition switch ON, brake pedal released 7.5 to 14 V
C45*1-120 (NSW) - C45*1-81 (E1)
C46*2-120 (NSW) - C46*2-81 (E1)
L - BR Park/neutral position switch Ignition switch ON, shift lever in P or N Below 3.0 V
Ignition switch ON, shift lever not in P or N 11 to 14 V
C45*1-19 (M+) - C45*1-82 (ME01)
C46*2-19 (M+) - C46*2-82 (ME01)
R - W-B Throttle actuator Idling with warm engine Pulse generation
(See waveform 9)
C45*1-18 (M-) - C45*1-82 (ME01)
C46*2-18 (M-) - C46*2-82 (ME01)
G - W-B Throttle actuator Idling with warm engine Pulse generation
(See waveform 10)
A38*1-24 (W) - C45*1-81 (E1)
A52*2-24 (W) - C46*2-81 (E1)
R - BR
R-Y - BR*4
MIL Ignition switch ON Below 3.0 V
Idling 11 to 14 V
A38*1-16 (TC) - C45*1-81 (E1)
A52*2-16 (TC) - C46*2-81 (E1)
V - BR
V-W - BR*4
Terminal TC of DLC3 Ignition switch ON 11 to 14 V
A38*1-15 (TACH) - C45*1-81 (E1)
A52*2-15 (TACH) - C46*2-81 (E1)
W - BR
W-G - BR*4
Engine speed Idling Pulse generation
(See waveform 11)
C45*1-72 (PSP) - C45*1-97 (ETHW)
C46*2-72 (PSP) - C46*2-97 (ETHW)
L-R - BR Power steering oil pressure sensor Ignition switch ON 0.33 to 3.60 V
C45*1-28 (AIRV) - C45*1-81 (E1) BR - BR Emission control valve signal for secondary air injection system Ignition switch ON 11 to 14 V
C45*1-54 (AIRP) - C45*1-81 (E1) P - BR Air pump control signal for secondary air injection system Ignition switch ON 11 to 14 V
C45*1-30 (AIDI) - C45*1-81 (E1) G - BR Diagnostic information signal for secondary air injection system Air injection system operating Pulse generation
(See waveform 14)
C45*1-60 (AIR1) - C45*1-81 (E1) G-W - BR No. 2 emission control valve for secondary air injection system Idling 11 to 14 V
A38*1-54 (AIP) - C45*1-98 (ETHA) P-L - BR Secondary air injection system pressure signal Ignition switch ON 0.5 to 4.5 V
A38*1-53 (AIP2) - C45*1-98 (ETHA) L-B - BR Secondary air injection system pressure signal Ignition switch ON 0.5 to 4.5 V
C45*1-61 (HAI1) - C45*1-81 (E1) G - BR Air pump heater for secondary air injection system Air pump heater operating 11 to 14 V
A38*1-10 (CANH) - C45*1-81 (E1)
A52*2-10 (CANH) - C46*2-81 (E1)
P - BR CAN communication line Ignition switch ON Pulse generation
(See waveform 12)
A38*1-11 (CANL) - C45*1-81 (E1)
A52*2-11 (CANL) - C46*2-81 (E1)
B - BR CAN communication line Ignition switch ON Pulse generation
(See waveform 13)
A38*1-52 (FPC) - C45*1-81 (E1)
A52*2-52 (FPC) - C46*2-81 (E1)
W - BR Fuel pump control Engine stopped and ignition switch ON Below 1.5 V
A38*1-14 (STSW) - C45*1-81 (E1)
A52*2-14 (STSW) - C46*2-81 (E1)
R - BR Ignition switch signal Shift lever in P or N, ignition switch START 6.0 V or higher
A38*1-41 (ACCR) - C45*1-81 (E1)
A52*2-41 (ACCR) - C46*2-81 (E1)
L-Y - BR ACC (accessory) relay control signal Cranking Below 1.5 V
C45*1-16 (STAR) - C45*1-81 (E1)
C46*2-16 (STAR) - C46*2-81 (E1)
L - BR Starter relay control Ignition switch ON Below 1.5 V
Cranking 6.0 V or higher
C45*1-32 (ALT) - C45*1-81 (E1)
C46*2-32 (ALT) - C46*2-81 (E1)
R - BR Generator Ignition switch ON 11 to 14 V

·

*1: for LHD

·

*2: for RHD

·

*3: The ECM terminal voltage is constant regardless of the output voltage from the sensor.

·

*4: GRJ200L-GNANKC


WAVEFORM 1


U162819E02
2.063,1.844 2.896,1.99 0.833,0.146 10 false 1 msec./DIV. 0.573,0.208 1.115,0.354 0.542,0.146 10 false 5 V/DIV. 0.458,1.135 0.948,1.281 0.49,0.146 10 false Ground

Camshaft Timing Oil Control Valve
ECM Terminal Name Between OC1+ and OC1-
Between OC2+ and OC2-
Between OE1+ and OE1-
Between OE2+ and OE2-
Tester Range 5 V/DIV., 1 msec./DIV.
Condition Idling


WAVEFORM 2


A385287E01
0.552,0.177 1.26,0.375 0.708,0.198 10 false 0.2 V/DIV. 0.49,1.427 1.156,1.625 0.667,0.198 10 false Ground 2.25,1.833 3.281,2.083 1.031,0.25 10 false 200 msec./DIV.

Heated Oxygen Sensor
ECM Terminal Name Between OX1B and EX1B or OX2B and EX2B
Tester Range 0.2 V/DIV., 200 msec./DIV.
Condition Engine speed maintained at 2500 rpm for 2 minutes after warming up engine

HINT:

In the Data List, items O2S B1S2 and O2S B2S2 show the ECM input values from the heated oxygen sensors.



WAVEFORM 3


G035622E21
0.49,0.323 1.125,0.469 0.635,0.146 10 false 30 V/DIV. 1.896,1.896 2.823,2.042 0.927,0.146 10 false 20 msec./DIV. 0.354,1.208 0.854,1.354 0.5,0.146 10 false Ground

Fuel Injector
ECM Terminal Name Between #10 (to #60) and E01
Tester Range 30 V/DIV., 20 msec./DIV.
Condition Idling

HINT:

The wavelength becomes shorter as the engine speed increases.



WAVEFORM 4


A385288E01
0.667,0.052 2.135,0.25 1.469,0.198 10 false KNK1 Signal Waveform 2.594,0.979 3.26,1.188 0.667,0.208 10 false Ground 2.469,0.24 3.375,0.469 0.906,0.229 10 false 1 V/DIV. 0.99,1.875 2.125,2.146 1.135,0.271 10 false 1 msec./DIV.

Knock Sensor
ECM Terminal Name Between KNK1 and EKNK or KNK2 and EKN2
Tester Range 1 V/DIV., 0.01 to 1 msec./DIV.
Condition Engine speed maintained at 4000 rpm after warming up engine

HINT:
·

The wavelength becomes shorter as the engine speed increases.

·

The waveforms and amplitudes displayed differ slightly depending on the vehicle condition.




WAVEFORM 5


A385289E01
2.844,0.042 3.427,0.281 0.583,0.24 10 false 2 V/DIV. 3.01,0.698 3.396,0.927 0.385,0.229 10 false GND 3.01,1.188 3.396,1.417 0.385,0.229 10 false GND 3.021,1.583 3.406,1.813 0.385,0.229 10 false GND 0.146,0.563 0.406,0.802 0.26,0.24 10 false (a) 0.135,1.271 0.396,1.51 0.26,0.24 10 false (b) 1.208,1.885 2.542,2.156 1.333,0.271 10 false 20 msec./DIV.

a.

Crankshaft position sensor


b.

VVT sensor

ECM Terminal Name (a) Between NE+ and NE-
(b) Between VV1+ and VV1- or VV2+ and VV2-
Tester Range 2 V/DIV., 20 msec./DIV.
Condition Idling

HINT:

The wavelength becomes shorter as the engine speed increases.




WAVEFORM 6


U166653E02
0.198,0.74 0.406,0.938 0.208,0.198 10 false (a) 0.208,1.573 0.406,1.771 0.198,0.198 10 false (b) 2.719,0.313 3.26,0.51 0.542,0.198 10 false 2 V/DIV. 2.76,1.188 3.25,1.385 0.49,0.198 10 false Ground 2.76,1.688 3.26,1.885 0.5,0.198 10 false Ground 1.198,1.979 2.083,2.156 0.885,0.177 10 false 20 msec./DIV. 0.594,0.021 2.563,0.167 1.969,0.146 10 false IGT and IGF Signal Waveforms

a.

Igniter IGT signal (from ECM to igniter)


b.

Igniter IGF signal (from igniter to ECM)

ECM Terminal Name (a) Between IGT (1 to 6) and E1
(b) Between IGF1 and E1
Tester Ranges 2 V/DIV., 20 msec./DIV.
Condition Idling

HINT:

The wavelength becomes shorter as the engine speed increases.




WAVEFORM 7


A205411E02
2.604,0.25 3.229,0.406 0.625,0.156 10 false 10 V/DIV. 0.927,1.906 1.833,2.083 0.906,0.177 10 false 20 msec./DIV. 2.677,1.073 3.042,1.25 0.365,0.177 10 false GND

Purge VSV
ECM Terminal Name Between PRG and E1
Tester Range 10 V/DIV., 20 msec./DIV.
Condition Idling

HINT:

If the waveform is not similar to the illustration, check the waveform again after idling for 10 minutes or more.



WAVEFORM 8


U162816E02
0.5,0.26 1.063,0.458 0.563,0.198 10 false 2 V/DIV. 0.375,1.167 1.021,1.365 0.646,0.198 10 false Ground 2.042,1.875 2.979,2.073 0.938,0.198 10 false 20 msec./DIV.

Vehicle Speed Signal
ECM Terminal Name Between SPD and E1
Tester Range 2 V/DIV., 20 msec./DIV.
Condition Ignition switch ON, driving wheels rotated slowly

HINT:

The wavelength becomes shorter as the vehicle speed increases.



WAVEFORM 9


A208000E06
2.856,0.973 3.186,1.119 0.330,0.146 10 GND 2.631,0.216 3.176,0.360 0.545,0.144 10 5 V/DIV. 0.501,0.616 0.722,0.759 0.221,0.143 10 M+ 1.237,1.806 2.058,1.964 0.820,0.158 10 1 msec./DIV.

Positive Terminal of Throttle Actuator
ECM Terminal Name Between M+ and ME01
Tester Range 5 V/DIV., 1 msec./DIV.
Condition Idling with warm engine

HINT:

The duty ratio varies depending on the throttle actuator operation.



WAVEFORM 10


A245848E04
2.849,0.99 3.182,1.142 0.333,0.151 10 GND 2.627,0.266 3.166,0.409 0.539,0.142 10 5 V/DIV. 0.479,0.626 0.664,0.777 0.184,0.15 10 M- 1.246,1.82 2.076,1.967 0.83,0.147 10 1 msec./DIV.

Negative Terminal of Throttle Actuator
ECM Terminal Name Between M- and ME01
Tester Range 5 V/DIV., 1 msec./DIV.
Condition Idling with warm engine

HINT:

The duty ratio varies depending on the throttle actuator operation.



WAVEFORM 11


U162817E02
0.448,0.25 1.031,0.448 0.583,0.198 10 false 5 V/DIV. 0.323,1.167 0.958,1.365 0.635,0.198 10 false Ground 2.167,1.885 3.115,2.083 0.948,0.198 10 false 10 msec./DIV.

Engine Speed Signal
ECM Terminal Name Between TACH and E1
Tester Range 5 V/DIV., 10 msec./DIV.
Condition Idling

HINT:

The wavelength becomes shorter as the engine speed increases.



WAVEFORM 12


A385290E01
2.99,1.385 3.427,1.615 0.438,0.229 10 false GND 2.76,0.094 3.354,0.354 0.594,0.26 10 false 1 V/DIV. 1.333,1.885 2.479,2.167 1.146,0.281 10 false 10 μsec./DIV.

CAN Communication Signal (Reference)
ECM Terminal Name Between CANH and E1
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.



WAVEFORM 13


A385291E01
2.969,1.375 3.427,1.573 0.458,0.198 10 false GND 2.75,0.083 3.354,0.354 0.604,0.271 10 false 1 V/DIV. 1.385,1.854 2.458,2.146 1.073,0.292 10 false 10 μsec./DIV.

CAN Communication Signal (Reference)
ECM Terminal Name Between CANL and E1
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.



WAVEFORM 14


A255990E01
2.962,0.998 3.299,1.147 0.337,0.149 10 GND 2.786,0.225 3.328,0.374 0.542,0.149 10 5 V/DIV. 1.2,1.789 2.096,1.938 0.896,0.149 10 50 msec./DIV.

Terminal AID of Air Injection Control Driver
ECM Terminal Name Between AIDI and E1
Tester Range 5 V/DIV., 50 msec./DIV.
Condition Performing Active Test using GTS (Secondary Air Injection Check)

HINT:

The wavelength changes when the air injection control driver detects malfunctions in the secondary air injection system (See page Engine / Hybrid System>1GR-FE (ENGINE CONTROL)>SFI SYSTEM>P1613).



WAVEFORM 15


A122768E04
0.185,0.653 0.401,0.803 0.216,0.150 10 NE 0.122,1.118 0.403,1.266 0.281,0.149 10 EV1 0.122,1.511 0.426,1.648 0.304,0.137 10 EV2 2.889,0.646 3.221,0.793 0.332,0.147 10 GND 2.889,1.208 3.221,1.355 0.332,0.147 10 GND 2.889,1.596 3.221,1.743 0.332,0.147 10 GND 2.637,0.139 3.236,0.295 0.599,0.156 10 5 V/DIV. 0.957,1.925 1.918,2.063 0.961,0.137 10 20 msec./DIV.

Crankshaft Position Sensor and VVT Sensor
ECM Terminal Name Between NE+ and NE-
Between EV1+ and EV1-
Between EV2+ and EV2-
Tester Range 5 V/DIV., 20 msec./DIV.
Condition Idling

HINT:

The wavelength becomes shorter as the engine speed increases.



WAVEFORM 16


A172534E01
0.58,0.085 1.119,0.243 0.539,0.158 10 5 V/DIV. 0.739,1.488 1.073,1.671 0.334,0.183 10 GND 0.739,0.714 1.073,0.898 0.334,0.183 10 GND 1.664,1.737 2.555,1.923 0.891,0.186 10 10 msec./DIV. 3.074,0.969 3.374,1.127 0.300,0.158 10 CH2 3.074,0.11 3.374,0.268 0.300,0.158 10 CH1

Air Fuel Ratio Sensor Heater
ECM Terminal Name Between HA1A and E04
Between HA2A and E05
Tester Range 5 V/DIV., 10 msec./DIV.
Condition Idling with warm engine

HINT:

The wavelength varies in accordance with the engine operating conditions.