11401M
1.INSTALL VVT SENSOR (for Exhaust Side of Bank 2)
Apply a light coat of engine oil to the O-ring of the VVT sensor.
When reusing the VVT sensor, inspect the O-ring.
If the O-ring has scratches or cuts, replace the VVT sensor.
Install the VVT sensor with the bolt.
Connect the VVT sensor connector.
11401M
2.INSTALL VVT SENSOR (for Intake Side of Bank 2)
Apply a light coat of engine oil to the O-ring of the VVT sensor.
When reusing the VVT sensor, inspect the O-ring.
If the O-ring has scratches or cuts, replace the VVT sensor.
Install the VVT sensor with the bolt.
Connect the VVT sensor connector.
11401M
3.INSTALL VVT SENSOR (for Exhaust Side of Bank 1)
Apply a light coat of engine oil to the O-ring of the VVT sensor.
When reusing the VVT sensor, inspect the O-ring.
If the O-ring has scratches or cuts, replace the VVT sensor.
Install the VVT sensor with the bolt.
Connect the VVT sensor connector.
11401M
4.INSTALL VVT SENSOR (for Intake Side of Bank 1)
Apply a light coat of engine oil to the O-ring of the VVT sensor.
When reusing the VVT sensor, inspect the O-ring.
If the O-ring has scratches or cuts, replace the VVT sensor.
Install the VVT sensor with the bolt.
Connect the VVT sensor connector.
17881
5.INSTALL NO. 1 AIR CLEANER HOSE
11259
6.INSTALL V-BANK COVER