Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › AIR FUEL RATIO SENSOR
RM2660E _51 Engine / Hybrid System _052774 1GR-FE ENGINE CONTROL _0255006 AIR FUEL RATIO SENSOR G

1GR-FE ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

A159233E15
2.508,1.201 3.117,1.390 0.608,0.189 10 HA1A*1 0.587,1.339 0.882,1.538 0.295,0.199 10 +B 0.113,0.114 2.652,0.488 2.539,0.374 10 Component without harness connected: (Air Fuel Ratio Sensor) 2.508,1.425 3.117,1.613 0.608,0.189 10 HA2A*2 0.163,2.555 1.125,2.739 0.961,0.184 10 *1: for Bank 1 0.163,2.941 1.269,3.125 1.105,0.184 10 *2: for Bank 2 1.461,1.999 0.997,1.461 0.997,1.461 0.862,1.461 false 1.988,2.003 2.337,1.313 2.337,1.313 2.467,1.313 false

a.

Measure the heater resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B)
for Bank 1
20°C (68°F) 1.8 to 3.4 Ω
1 (HA2A) - 2 (+B)
for Bank 2
20°C (68°F) 1.8 to 3.4 Ω


If the result is not as specified, replace the air fuel ratio sensor.