Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE
RM2660E _51 Engine / Hybrid System _052774 1GR-FE ENGINE CONTROL _0255009 CAMSHAFT OIL CONTROL VALVE G

1GR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSPECTION  


PROCEDURE

Hide 15330B 1.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 6.9 to 7.9 Ω


If the result is not as specified, replace the camshaft timing oil control valve.


b.
A267615E01
0.072,0.052 0.256,0.214 0.184,0.163 10 *a 2.481,0.043 2.585,0.191 0.104,0.148 10 1 3.297,0.043 3.402,0.191 0.104,0.148 10 2 2.774,0.354 2.677,0.133 2.677,0.133 2.588,0.133 false 3.098,0.354 3.194,0.133 3.194,0.133 3.283,0.133 false

Connect the positive (+) lead of the battery to terminal 1 and the negative (-) lead to terminal 2 and check the movement of the valve.

OK:
Tester Connection Condition Specified Condition
1 - 2 Battery positive (+) voltage is applied Valve moves in direction of left arrow shown in illustration
Battery positive (+) voltage is cut off Valve moves in direction of right arrow shown in illustration


Text in Illustration
*a Component without harness connected
(Camshaft Timing Oil Control Valve)

If the result is not as specified, replace the camshaft timing oil control valve.

If the valve cannot return properly because of foreign matter, a small pressure leak in the advanced direction may occur and a DTC may be stored.