Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › THROTTLE BODY
RM2660E _51 Engine / Hybrid System _052774 1GR-FE ENGINE CONTROL _0255012 THROTTLE BODY G

1GR-FE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22030 1.INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A164765E02
2.174,2.376 2.427,2.555 0.253,0.179 10 M+ 2.73,2.376 2.983,2.555 0.253,0.179 10 M- 2.295,2.343 2.295,2.022 false 2.845,2.336 2.845,2.262 false 2.845,2.262 2.65,1.987 false 0.066,0.004 2.588,0.382 2.522,0.378 10 Component without harness connected: (Throttle Body with Motor)

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (M+) - 1 (M-) 20°C (68°F) 0.3 to 100 Ω


If the result is not as specified, replace the throttle body with motor assembly.