Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › ACCELERATOR PEDAL › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052774 1GR-FE ENGINE CONTROL _0255014 ACCELERATOR PEDAL A

1GR-FE ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 78110K 1.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.


a.
A183103E07
0.063,0.104 0.885,0.542 0.823,0.438 10 true for LHD: 0.073,2.552 0.802,3.083 0.729,0.531 10 true for RHD:

Disconnect the accelerator pedal position sensor connector.


b.

Remove the 2 nuts and accelerator pedal sensor.