78110K
1.INSPECT ACCELERATOR PEDAL ASSEMBLY
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester main switch on.
Enter the following menus: Powertrain / Engine and ECT / Data List / ETCS / Accelerator Position No. 1 and Accelerator Position No. 2.
Read the value displayed on the intelligent tester.
| Tester Display | Condition | Specified Condition |
|---|---|---|
| Accel Sens. No.1 Volt % | Released | 10 to 22% |
| Depressed | 52 to 90% | |
| Accel Sens. No.2 Volt % | Released | 24 to 40% |
| Depressed | 68 to 99% |
If the result is not as specified, check the accelerator pedal, wire harness and ECM.