Home › Engine / Hybrid System › 3UR-FE (ENGINE CONTROL) › POWER STEERING OIL PRESSURE SWITCH
RM2660E _51 Engine / Hybrid System _052775 3UR-FE ENGINE CONTROL _0255030 POWER STEERING OIL PRESSURE SWITCH G

3UR-FE ENGINE CONTROL  POWER STEERING OIL PRESSURE SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 89438B 1.INSPECT POWER STEERING OIL PRESSURE SWITCH

a.

Check the oil pressure switch.

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the engine switch on (IG).


iii.

Turn the intelligent tester main switch on.


iv.

Enter the following menus: Powertrain / Engine and ECT / Data List / All Data / Power Steering pressure.


v.

Start the engine.


vi.

Read the value displayed on the intelligent tester.

OK:
Condition Specified Condition
Power steering operating ON
Power steering not operating OFF


If the result is not as specified, check the wire harness and connector. If the wire harness and connector are normal, replace the power steering oil pressure switch.