Home › Engine / Hybrid System › 3UR-FE (ENGINE CONTROL) › SFI SYSTEM(w/o Secondary Air Injection System) › from 2015.08
RM2660E _51 Engine / Hybrid System _052775 3UR-FE ENGINE CONTROL _0255032 SFI SYSTEM C

3UR-FE ENGINE CONTROL  SFI SYSTEM  P060D  Internal Control Module Accelerator Pedal Position Performance  


DESCRIPTION

The ECM monitors the input signals of the Accelerator Pedal Position (APP) sensor No. 1. When the input signals and control signals are deviated, a DTC is stored.

DTC Code DTC Detection Condition Trouble Area
P060D When either condition below is met:
·

An ECM main CPU error.

·

An ECM sub CPU error.


ECM

PROCEDURE

1.CHECK DTC

b.

Turn the engine switch off.


c.

Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.


d.

Connect the cable to the negative (-) battery terminal.


e.

Turn the engine switch on (IG).


f.

Check DTC.

OK:

P060D is not output.




OK

NG