Home › Engine / Hybrid System › 1UR-FE (ENGINE MECHANICAL) › DRIVE BELT
RM2660E _51 Engine / Hybrid System _052776 1UR-FE ENGINE MECHANICAL _0255034 DRIVE BELT G

1UR-FE ENGINE MECHANICAL  DRIVE BELT  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 16361A 1.INSPECT FAN AND GENERATOR V BELT

a.
B000543

Check the belt for wear, cracks or other signs of damage.

If any of the following defects is found, replace the fan and generator V belt.

·

The belt is cracked.

·

The belt is worn out to the extent that the cords are exposed.

·

The belt has chunks missing from the ribs.



b.
B000540E30
0.563,0.313 0.729,0.51 0.167,0.198 10 false *a 2.24,0.313 2.406,0.479 0.167,0.167 10 false *b

Check that the belt fits properly in the ribbed grooves.

Text in Illustration
*a CORRECT
*b INCORRECT

HINT:

Check with your hand to confirm that the belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the fan and generator V belt. Install a new fan and generator V belt correctly.



Hide 16620 2.INSPECT V-RIBBED BELT TENSIONER ASSEMBLY

a.

Check that nothing gets caught in the tensioner by turning it clockwise and counterclockwise.

If the result is not as specified, replace the V-ribbed belt tensioner assembly.