Home › Engine / Hybrid System › 3UR-FE (ENGINE MECHANICAL) › CYLINDER HEAD
RM2660E _51 Engine / Hybrid System _052777 3UR-FE ENGINE MECHANICAL _0255051 CYLINDER HEAD A

3UR-FE ENGINE MECHANICAL  CYLINDER HEAD  REPAIR  


PROCEDURE

Hide 11131 1.REPAIR INTAKE VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.

·

Take off the cutter gradually to make the intake valve seat smooth.



a.
A145575

Using a 45° cutter, resurface the valve seat so that the valve seat width is more than the specification.


b.
A385331E01
2.813,0.021 3.115,0.219 0.302,0.198 10 false 60° 3.073,0.188 3.375,0.385 0.302,0.198 10 false 45° 3.198,0.427 3.427,0.625 0.229,0.198 10 false 30° 2.823,1.583 3.052,1.781 0.229,0.198 10 false *1

Using 30° and 60° cutters, correct the valve seat so that the valve contacts the entire circumference of the seat. The contact should be in the center of the valve seat, and the valve seat width should be maintained within the specified range around the entire circumference of the seat.

Standard width:

1.1 to 1.5 mm (0.0433 to 0.0591 in.)


Text in Illustration
*1 Width


c.

Hand-lap the valve and valve seat with an abrasive compound.


d.

Check the valve seating position.


Hide 11135 2.REPAIR EXHAUST VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.

·

Take off the cutter gradually to make the exhaust valve seat smooth.



a.
A145576

Using a 45° cutter, resurface the valve seat so that the valve seat width is more than the specification.


b.
A124255E26
2.573,0.063 2.813,0.219 0.24,0.156 10 false 60° 2.948,0.167 3.188,0.323 0.24,0.156 10 false 45° 3.135,0.438 3.375,0.594 0.24,0.156 10 false 30° 2.833,1.781 3.26,1.969 0.427,0.188 10 false *1

Using 30° and 60° cutters, correct the valve seat so that the valve contacts the entire circumference of the seat. The contact should be in the center of the valve seat, and the valve seat width should be maintained within the specified range around the entire circumference of the seat.

Standard width:

1.1 to 1.5 mm (0.0433 to 0.0591 in.)


Text in Illustration
*1 Width


c.

Hand-lap the valve and valve seat with an abrasive compound.


d.

Check the valve seating position.