Home › Engine / Hybrid System › 1GR-FE (ENGINE MECHANICAL) › DRIVE BELT
RM2660E _51 Engine / Hybrid System _052778 1GR-FE ENGINE MECHANICAL _0255054 DRIVE BELT G

1GR-FE ENGINE MECHANICAL  DRIVE BELT  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 16361A 1.INSPECT FAN & GENERATOR V BELT

a.
A139581

Check the belt for wear, cracks or other signs of damage.

If any of the following defects is found, replace the fan and generator V belt.

·

The belt is cracked.


·

The belt is worn out to the extent that the cords are exposed.


·

The belt has chunks missing from the ribs.



b.
A139582E02
0.211,1.386 0.948,1.556 0.737,0.170 10 CORRECT 1.823,1.386 2.701,1.544 0.878,0.159 10 INCORRECT

Check that the belt fits properly in the ribbed grooves.

HINT:

Check with your hand to confirm that the belt has not slipped out of the groove on the bottom of the pulley. If it has slipped out, replace the fan and generator V belt. Install a new fan and generator V belt correctly.



Hide 16620 2.INSPECT V-RIBBED BELT TENSIONER ASSEMBLY

a.

Turn the tensioner clockwise and counterclockwise. Check that the tensioner moves smoothly.

If a malfunction exists, replace the tensioner.