Home › Engine / Hybrid System › 1VD-FTV (ENGINE MECHANICAL) › CYLINDER HEAD
RM2660E _51 Engine / Hybrid System _052779 1VD-FTV ENGINE MECHANICAL _0255071 CYLINDER HEAD A

1VD-FTV ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE VALVE

HINT:

Arrange the valves, inner compression springs, valve spring retainers and valve spring retainer locks in the correct order.


a.
A164542E03
0.604,1.823 1.188,1.823 false 2.833,0.24 3.104,0.323 3.104,0.323 3.104,0.427 true 0.292,1.75 0.583,1.896 0.292,0.146 10 true SST 2.99,0.448 3.281,0.594 0.292,0.146 10 false SST

Place the cylinder head on a wooden block.


b.

Using SST, compress the inner compression spring and remove the valve spring retainer lock.

SST
09202-70020  (09202-00010)


c.

Remove the inner compression spring, valve spring retainer and valve.


Hide 13711A 2.REMOVE VALVE STEM OIL SEAL

a.
A164543

Using pliers, remove the valve stem oil seal.


Hide 13734 3.REMOVE VALVE SPRING SEAT

a.
A164544

Using compressed air and a magnetic finger, remove the valve spring seat by blowing air.


Hide 11117E 4.REMOVE NO. 1 STRAIGHT SCREW PLUG (w/ DPF)

a.
A267277E01
0.087,0.102 0.272,0.257 0.185,0.155 10 *a 0.087,2.32 0.272,2.475 0.185,0.155 10 *b

Remove the No. 1 straight screw plug and gasket.

Text in Illustration
*a RH
*b LH


Hide 23699A 5.REMOVE NOZZLE HOLDER CLAMP SEAT (w/o DPF)

A164545