Home › Engine / Hybrid System › 1VD-FTV (ENGINE MECHANICAL) › CYLINDER HEAD
RM2660E _51 Engine / Hybrid System _052779 1VD-FTV ENGINE MECHANICAL _0255071 CYLINDER HEAD A

1VD-FTV ENGINE MECHANICAL  CYLINDER HEAD  REPAIR  


PROCEDURE

Hide 11131 1.REPAIR INTAKE VALVE SEAT

A164597

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.



a.

Using a 90° cutter, resurface the valve seat so that the valve seat width is more than the specification.


b.
A385746E01
2.417,0.115 2.729,0.302 0.313,0.188 10 false 40° 2.729,0.302 3.042,0.49 0.313,0.188 10 false 90° 2.896,0.604 3.208,0.792 0.313,0.188 10 false 130° 2.469,1.542 2.781,1.729 0.313,0.188 10 false Width

Using 40° and 130° cutters, correct the valve seat so that the valve contacts the entire circumference of the seat. The contact should be in the center of the valve seat, and the valve seat width should be maintained within the specified range around the entire circumference of the seat.

Standard width:

1.0 to 1.4 mm (0.0394 to 0.0551 in.)



c.
A385747

Hand-lap the valve and valve seat with an abrasive compound.


d.

Check the valve seating position.


Hide 11135 2.REPAIR EXHAUST VALVE SEAT

A164597

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.



a.

Using a 90° cutter, resurface the valve seat so that the valve seat width is more than the specification.


b.
A385746E02
2.448,0.115 2.75,0.302 0.302,0.188 10 false 60° 2.76,0.323 3.063,0.51 0.302,0.188 10 false 90° 2.938,0.604 3.24,0.792 0.302,0.188 10 false 150° 2.51,1.573 2.927,1.771 0.417,0.198 10 false Width

Using 60° and 150° cutters, correct the valve seat so that the valve contacts the entire circumference of the seat. The contact should be in the center of the valve seat, and the valve seat width should be maintained within the specified range around the entire circumference of the seat.

Standard width:

1.0 to 1.4 mm (0.0394 to 0.0551 in.)



c.
A164824

Hand-lap the valve and valve seat with an abrasive compound.


d.

Check the valve seating position.