Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL PUMP(for Double Tank Type) › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052780 1GR-FE FUEL _0255079 FUEL PUMP(for Double Tank Type) A

1GR-FE FUEL  FUEL PUMP(for Double Tank Type)  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
A181362

Do not disconnect the hoses indicated in the illustration.


PROCEDURE

Hide 1.INSTALL NO. 1 FUEL SUCTION SUPPORT

a.
A175045

Attach the 2 claws to the claw holes to install the fuel suction support.


Hide 23070 2.INSTALL FUEL MAIN VALVE ASSEMBLY

a.
A097616E21
0.885,0.948 0.885,0.198 0.885,0.198 2.083,0.198 false 1.854,0.708 1.854,0.198 false 2.125,0.104 2.917,0.281 0.792,0.177 10 false New O-Ring

Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel main valve.


b.
A176399E01
2.16,1.272 2.646,1.444 0.486,0.172 10 O-Ring 1.672,1.361 2.115,1.361 false 1.728,1.639 1.947,1.639 1.947,1.639 1.947,1.361 false 0.04,0.957 1.056,1.114 1.016,0.157 10 Fuel Filter Case 0.651,0.932 0.651,0.789 0.651,0.789 1.196,0.332 false

Install the fuel main valve to the fuel filter case.

NOTICE:

Make sure the O-rings are not cut or pinched during the installation.



Hide 23221 3.INSTALL FUEL PUMP

a.
A175042

Connect the fuel pump wire harness connector to the fuel pump.


b.
A175046E01
2.657,1.529 3.133,1.705 0.475,0.177 10 O-Ring 2.657,2.061 3.133,2.236 0.475,0.175 10 Spacer 2.259,2.148 2.621,2.148 false 2.628,1.617 2.501,1.617 2.501,1.617 2.266,1.917 false

Apply a light coat of gasoline to a new O-ring. Then install the spacer and O-ring to the fuel pump.


c.
A176388E01
0.032,0.43 0.684,0.743 0.651,0.313 10 Fuel Filter Case 0.823,0.533 1.069,0.533 false

Attach the 5 claws to the claw holes and install the fuel pump to the fuel filter case.


Hide 77131C 4.INSTALL NO. 1 FUEL SUB-TANK

NOTICE:

Make sure that the fuel tube passes into the section marked by the circle.


A184234E01
2.22,0.231 2.936,0.415 0.716,0.184 10 Fuel Tube 2.183,0.313 1.625,0.313 false

a.
A175041

Attach the 3 claws to the claw holes and install the fuel sub-tank.


b.
A176344

Attach the 3 claws to the claw holes.


c.
U163051E02
0.479,1.552 0.479,1.417 0.479,1.417 0.885,1.146 true 2.656,2.688 2.49,2.688 2.49,2.688 2.115,2.938 true 0.094,1.563 0.719,1.74 0.625,0.177 10 false Jet Pump 2.156,3.156 2.281,3.302 0.125,0.146 10 false A 0.917,1.385 1.042,1.531 0.125,0.146 10 false B 2.677,2.583 3.302,2.76 0.625,0.177 10 true Jet Pump

Connect the jet pump (labeled B) to the sub-tank.

i.

Attach the claw on the end of the tube to the claw hole.



d.

Connect the jet pump (labeled A) to the sub-tank.


e.
A181431

Connect the fuel pump connector.