Home › Engine / Hybrid System › 3UR-FE (FUEL) › FUEL PUMP › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052781 3UR-FE FUEL _0255091 FUEL PUMP A

3UR-FE FUEL  FUEL PUMP  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
A237022

Do not disconnect the hoses indicated in the illustration.


PROCEDURE

Hide 1.INSTALL NO. 1 FUEL SUCTION SUPPORT

a.

Attach the 2 claws to the claw holes to install the fuel suction support.


Hide 23070 2.INSTALL FUEL MAIN VALVE ASSEMBLY

a.
A097616E20
0.885,0.948 0.885,0.198 0.885,0.198 2.083,0.198 false 1.854,0.708 1.854,0.198 false 2.125,0.104 2.313,0.302 0.188,0.198 10 false *1

Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel main valve.

Text in Illustration
*1 New O-Ring


b.

Install the fuel main valve to the fuel filter case.

NOTICE:

Make sure the O-rings are not cut or pinched during the installation.



Hide 23221 3.INSTALL FUEL PUMP

a.

Connect the fuel pump wire harness connector to the fuel pump.


b.
A175046E02
2.657,1.506 2.856,1.689 0.199,0.182 10 *1 2.657,2.039 2.852,2.232 0.195,0.193 10 *2 2.259,2.126 2.621,2.126 false 2.628,1.595 2.501,1.595 2.501,1.595 2.266,1.894 false

Apply a light coat of gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.

Text in Illustration
*1 O-Ring
*2 Spacer


c.

Attach the 5 claws to the claw holes and install the fuel pump to the fuel filter case.


Hide 4.INSTALL NO. 1 FUEL SUB-TANK

NOTICE:

Make sure that the fuel tube passes into the section marked by the circle.


A184234E02
2.22,0.193 2.464,0.408 0.244,0.215 10 *1 2.183,0.274 1.625,0.274 false

Text in Illustration
*1 Fuel Tube

a.

Attach the 3 claws to the claw holes and install the fuel sub-tank.


b.
U163052E02
0.479,1.552 0.479,1.417 0.479,1.417 0.885,1.146 true 2.677,2.625 2.521,2.625 2.521,2.625 2.167,3 true 0.354,1.573 0.573,1.76 0.219,0.188 10 false *1 2.135,3.156 2.26,3.302 0.125,0.146 10 false A 0.917,1.385 1.042,1.531 0.125,0.146 10 false B 2.74,2.531 2.938,2.708 0.198,0.177 10 false *1

Connect the jet pump (labeled B) to the sub-tank.

Text in Illustration
*1 Jet Pump

i.

Attach the claw on the end of the tube to the claw hole.



c.

Connect the jet pump (labeled A) to the sub-tank.


d.

Connect the fuel pump connector.