83320
1.INSPECT FUEL SENDER GAUGE ASSEMBLY
Check that the float moves smoothly between F and E.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 - 3 | Float level is F (upper) | 13.5 to 16.5 Ω |
| Float level is E (lower) | 405.5 to 414.5 Ω |
| *a | Component without harness connected
(Fuel Sender Gauge) |
| *b | F (Upper) |
| *c | E (Lower) |
If the result is not as specified, replace the fuel sender gauge assembly.