Home › Engine / Hybrid System › 3UR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank) › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052781 3UR-FE FUEL _0255095 FUEL SENDER GAUGE ASSEMBLY(for Fuel Sub Tank) G

3UR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY(for Fuel Sub Tank)  INSPECTION  


PROCEDURE

Hide 83320B 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

A174986E02
0.039,0 0.273,0.249 0.235,0.249 10 *a 2.012,1.458 2.117,1.609 0.105,0.151 10 1 1.48,1.458 1.585,1.609 0.105,0.151 10 3 1.744,1.458 1.849,1.609 0.105,0.151 10 2 1.466,3.152 0.81,3.152 false 1.367,4.089 0.842,4.089 false 0.603,3.066 0.780,3.245 0.176,0.178 10 *b 0.646,3.991 0.823,4.169 0.176,0.178 10 *c

a.

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 Float level is F (upper) 12 to 18 Ω
Float level is E (lower) 405 to 415 Ω


Text in Illustration
*a Component without harness connected
(Fuel Sender Gauge)
*b F (Upper)
*c E (Lower)

If the result is not as specified, replace the fuel sender gauge assembly.