Do not disconnect the hoses indicated in the illustration.
| *a | for Single Tank Type | *b | for Double Tank Type |
83320
1.REMOVE FUEL SENDER GAUGE ASSEMBLY
77131C
2.REMOVE NO. 1 FUEL SUB-TANK (for Single Tank Type)
Disconnect the fuel pump connector.
Disconnect the jet pump from the No. 1 fuel sub-tank.
| *1 | Jet Pump |
Using a small screwdriver, detach the claw from the No. 1 fuel sub-tank.
Tape the screwdriver tip before use.
Detach the tube from the 2 clamps on the No. 1 fuel sub-tank.
Using a screwdriver, detach the 3 claws from the claw holes.
Do not damage the No. 1 fuel sub-tank.
Tape the screwdriver tip before use.
Using a screwdriver, detach the 3 claws from the claw holes and remove the No. 1 fuel sub-tank.
Do not damage the No. 1 fuel sub-tank.
Tape the screwdriver tip before use.
3.REMOVE NO. 1 FUEL SUB-TANK (for Double Tank Type)
Disconnect the fuel pump connector.
Disconnect the jet pump (labeled A) from the No. 1 fuel sub-tank.
| *1 | Jet Pump |
Disconnect the jet pump (labeled B) from the No. 1 fuel sub-tank.
Using a small screwdriver, detach the claw from the No. 1 fuel sub-tank.
Tape the screwdriver tip before use.
Using a screwdriver, detach the 3 claws from the claw holes.
Do not damage the No. 1 fuel sub-tank.
Tape the screwdriver tip before use.
Using a screwdriver, detach the 3 claws from the claw holes.
Do not damage the No. 1 fuel sub-tank.
Tape the screwdriver tip before use.
23221
4.REMOVE FUEL PUMP
Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the fuel filter case.
| *1 | Fuel Filter Case |
Tape the screwdriver tip before use.
Disconnect the fuel pump wire harness connector from the fuel pump to remove it.
Remove the O-ring and spacer from the fuel pump.
| *1 | O-Ring |
| *2 | Spacer |
23070
5.REMOVE FUEL MAIN VALVE ASSEMBLY
Remove the fuel main valve from the fuel filter case.
| *1 | Fuel Filter Case |
| *2 | O-Ring |
Remove the 2 O-rings from the fuel main valve.
6.REMOVE NO. 1 FUEL SUCTION SUPPORT
Detach the 2 claws from the claw holes to remove the fuel suction support.