Home › Engine / Hybrid System › 1UR-FE (FUEL) › FUEL PUMP › from 2015.08
RM2660E _51 Engine / Hybrid System _052782 1UR-FE FUEL _0255100 FUEL PUMP A

1UR-FE FUEL  FUEL PUMP  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:

Do not disconnect the hoses indicated in the illustration.

A369253E01
2.142,0.107 2.376,0.341 0.234,0.234 10 *a 5.199,0.107 5.433,0.341 0.234,0.234 10 *b


Text in Illustration
*a for Single Tank Type *b for Double Tank Type

PROCEDURE

Hide 1.INSTALL NO. 1 FUEL SUCTION SUPPORT

a.

Attach the 2 claws to the claw holes to install the fuel suction support.


Hide 23070 2.INSTALL FUEL MAIN VALVE ASSEMBLY

a.
A097616E19
0.885,0.948 0.885,0.198 0.885,0.198 2.083,0.198 false 1.854,0.708 1.854,0.198 false 2.125,0.104 2.917,0.281 0.792,0.177 10 false *1

Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel main valve.

Text in Illustration
*1 New O-Ring


b.
A175044E02
2.174,0.877 2.367,1.057 0.193,0.180 10 *2 1.65,0.959 2.136,0.959 false 1.715,1.216 2.012,1.216 2.012,1.216 2.012,0.959 false 0.504,0.825 0.674,1.011 0.170,0.186 10 *1 0.623,0.781 0.623,0.667 0.623,0.667 1.187,0.317 false

Install the fuel main valve to the fuel filter case.

Text in Illustration
*1 Fuel Filter Case
*2 O-Ring

NOTICE:

Make sure the O-rings are not cut or pinched during the installation.



Hide 23221 3.INSTALL FUEL PUMP

a.
A175042

Connect the fuel pump wire harness connector to the fuel pump.


b.
A175046E02
2.657,1.506 2.856,1.689 0.199,0.182 10 *1 2.657,2.039 2.852,2.232 0.195,0.193 10 *2 2.259,2.126 2.621,2.126 false 2.628,1.595 2.501,1.595 2.501,1.595 2.266,1.894 false

Apply a light coat of gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.

Text in Illustration
*1 O-Ring
*2 Spacer


c.

Attach the 5 claws to the claw holes and install the fuel pump to the fuel filter case.


Hide 77131C 4.INSTALL NO. 1 FUEL SUB-TANK (for Single Tank Type)

NOTICE:
A184234E02
2.22,0.193 2.464,0.408 0.244,0.215 10 *1 2.183,0.274 1.625,0.274 false

Make sure that the fuel tube passes into the section marked by the circle.


Text in Illustration
*1 Fuel Tube

a.

Attach the 3 claws to the claw holes to install the No. 1 fuel sub-tank.


b.

Attach the 3 claws to the claw holes.


c.

Install the tube part to the No. 1 fuel sub-tank.

i.

Attach the claw on the end of the tube to the claw hole. Install the tube to the 2 clamps on the No. 1 fuel sub-tank.



d.

Connect the jet pump to the No. 1 fuel sub-tank.


e.

Connect the fuel pump connector.


Hide 5.INSTALL NO. 1 FUEL SUB-TANK (for Double Tank Type)

NOTICE:

Make sure that the fuel tube passes into the section marked by the circle.


A184234E02
2.22,0.193 2.464,0.408 0.244,0.215 10 *1 2.183,0.274 1.625,0.274 false

Text in Illustration
*1 Fuel Tube

a.

Attach the 3 claws to the claw holes and install the No. 1 fuel sub-tank.


b.

Attach the 3 claws to the claw holes.


c.
U163049E02
0.458,2.865 0.458,2.698 0.458,2.698 1.01,2.156 true 2.604,2.625 2.458,2.625 2.458,2.625 2.24,2.896 true 0.385,2.885 0.573,3.063 0.188,0.177 10 false *1 2.271,3.167 2.396,3.313 0.125,0.146 10 false A 0.688,1.865 0.813,2.01 0.125,0.146 10 false B 2.646,2.5 2.833,2.677 0.188,0.177 10 true *1

Connect the jet pump (labeled B) to the No. 1 fuel sub-tank.

Text in Illustration
*1 Jet Pump

i.

Attach the claw on the end of the tube to the claw hole.



d.

Connect the jet pump (labeled A) to the No. 1 fuel sub-tank.


e.

Connect the fuel pump connector.