Home › Engine / Hybrid System › 1UR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052782 1UR-FE FUEL _0255103 FUEL SENDER GAUGE ASSEMBLY G

1UR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

a.
A243511E01
0.113,0.074 0.305,0.254 0.192,0.180 10 *a 0.947,2.127 1.109,2.280 0.162,0.152 10 *b 0.967,4.265 1.129,4.417 0.162,0.152 10 *c 1.19,2.223 1.433,2.223 false 1.179,4.369 1.423,4.369 false

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Float level is F (upper) 13.5 to 16.5 Ω
Float level is E (lower) 405.5 to 414.5 Ω


Text in Illustration
*a Component without harness connected
(Fuel Sender Gauge)
*b F (Upper)
*c E (Lower)

If the result is not as specified, replace the fuel sender gauge assembly.