Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL INJECTOR (w/o DPF)
RM2660E _51 Engine / Hybrid System _052783 1VD-FTV FUEL _0255109 FUEL INJECTOR(w/o DPF) G

1VD-FTV FUEL  FUEL INJECTOR(w/o DPF)  INSPECTION  


PROCEDURE

Hide 23670 1.INSPECT FUEL INJECTOR (w/o DPF)

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.85 to 1.05 Ω


If the result is not as specified, replace the fuel injector.