Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL SUPPLY PUMP
RM2660E _51 Engine / Hybrid System _052783 1VD-FTV FUEL _0255110 FUEL SUPPLY PUMP G

1VD-FTV FUEL  FUEL SUPPLY PUMP  INSPECTION  


PROCEDURE

Hide 22100 1.INSPECT FUEL SUPPLY PUMP

a.

Inspect the suction control valve.

i.
A181407E02
1.833,2.802 1.833,2.135 true 1.542,2.167 2.146,1.771 2.146,1.771 2.25,1.771 true 1.5,2.073 2.135,1.448 2.135,1.448 2.25,1.448 true 1,2.802 2.365,2.958 1.365,0.156 10 false Suction Control Valve 2.281,1.354 2.385,1.5 0.104,0.146 10 false 1 2.292,1.677 2.396,1.823 0.104,0.146 10 false 2 0.073,0.031 2.552,0.375 2.479,0.344 10 false Component without harness connected: (Fuel Supply Pump)

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 1.9 to 2.3 Ω


If the result is not as specified, replace the fuel supply pump.



Hide 2.INSPECT FUEL TEMPERATURE SENSOR

a.

Inspect the fuel temperature sensor (See page Engine / Hybrid System>1VD-FTV (FUEL)>FUEL TEMPERATURE SENSOR>INSPECTION).

If the result is not as specified, replace the fuel temperature sensor.