23810A
1.INSPECT COMMON RAIL ASSEMBLY RH
Inspect the fuel pressure sensor.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 25°C (77°F) | 16.4 kΩ or less |
| 2 - 3 | 25°C (77°F) | 3 kΩ or less |
| *a | Component without harness connected
(Fuel Pressure Sensor) |
If the result is not as specified, replace the common rail assembly RH.
23820A
2.INSPECT COMMON RAIL ASSEMBLY LH (w/ DPF)
Inspect the pressure discharge valve.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 20°C (68°F) | 0.96 to 1.16 Ω |
If the result is not as specified, replace the common rail assembly LH.