Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL PUMP › 2014.08–2016.08
RM2660E _51 Engine / Hybrid System _052783 1VD-FTV FUEL _0255117 FUEL PUMP A

1VD-FTV FUEL  FUEL PUMP  REMOVAL  


PROCEDURE

Hide 77100U 1.REMOVE FUEL TANK SUB-ASSEMBLY

Hide 77020A 2.REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

a.
A260062E01
0.671,0.043 0.969,0.187 0.299,0.144 10 SST 1.036,0.116 1.16,0.116 1.16,0.116 1.315,0.328 false

Set SST on the retainer.

SST
09808-14030  

HINT:
·

Securely attach the claws of SST to the protrusion of the retainer and fix SST in place.

·

Install SST while pressing the claws of SST against the retainer (towards the center of SST).




b.
A260063E01
2.864,1.38 3.166,1.539 0.301,0.159 10 SST 2.827,1.462 2.664,1.462 2.664,1.462 2.494,1.203 false

Using SST, loosen the retainer.

SST
09808-14030  

Text in Illustration
V100135

Turn

NOTICE:
·

Do not use any tools other than those specified in this operation. Damage to the retainer or the fuel tank may result.

·

While pressing down on SST so that the claws of SST do not slip off the protrusion of the retainer, turn the retainer counterclockwise to loosen it.



HINT:

The protrusion of the retainer fit in the ends of SST.



c.

Remove the retainer.


d.

Remove the retainer while holding the fuel suction tube assembly by hand.

NOTICE:

Be careful not to bend the arm of the fuel sender gauge.



e.

Remove the gasket from the fuel tank.