Do not disconnect the hoses indicated in the illustration.
83320
1.REMOVE FUEL SENDER GAUGE ASSEMBLY
2.REMOVE NO. 1 FUEL SUB-TANK (for Single Tank Type)
Using a screwdriver, detach the 3 claws from the claw holes to remove the fuel sub-tank.
Do not damage the fuel sub-tank.
Tape the screwdriver tip before use.
77131C
3.REMOVE NO. 1 FUEL SUB-TANK (for Double Tank Type)
Disconnect the fuel pump connector.
Using a small screwdriver, detach the claw from the sub-tank.
Tape the screwdriver tip before use.
Using a screwdriver, detach the 3 claws from the claw holes to remove the fuel sub-tank.
Do not damage the fuel sub-tank.
Tape the screwdriver tip before use.
23221
4.REMOVE FUEL PUMP (for Double Tank Type)
Using a screwdriver, detach the 2 claws from the claw holes and remove the fuel pump.
Tape the screwdriver tip before use.
Disconnect the fuel pump wire harness connector from the fuel pump.
Remove the O-ring and spacer from the fuel pump.