Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL PUMP › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052783 1VD-FTV FUEL _0255117 FUEL PUMP A

1VD-FTV FUEL  FUEL PUMP  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:

Do not disconnect the hoses indicated in the illustration.

A181363E01
0.678,0 2.289,0.206 1.611,0.206 12 for Single Tank Type: 4.445,0 6.126,0.206 1.681,0.206 12 for Double Tank Type:


PROCEDURE

Hide 23221 1.INSTALL FUEL PUMP (for Double Tank Type)

a.
A175091

Connect the fuel pump wire harness connector to the fuel pump.


b.
A176341E01
2.692,0.666 3.166,0.839 0.474,0.173 10 O-Ring 2.692,1.17 3.166,1.343 0.474,0.173 10 Spacer 2.25,1.258 2.652,1.258 false 2.656,0.753 2.52,0.753 2.52,0.753 2.263,0.993 false

Apply a light coat of gasoline to a new O-ring. Then install the spacer and O-ring to the fuel pump.


c.
A175090

Attach the 2 claws to the claw holes to install the fuel pump.


Hide 2.INSTALL NO. 1 FUEL SUB-TANK (for Single Tank Type)

a.
A176405

Attach the 3 claws to the claw holes to install the fuel sub-tank.


Hide 77131C 3.INSTALL NO. 1 FUEL SUB-TANK (for Double Tank Type)

a.
A175089

Attach the 3 claws to the claw holes to install the fuel sub-tank.


b.
A175095E01
0.078,2.182 0.720,2.355 0.642,0.173 10 Jet Pump 0.464,2.148 0.464,2.021 0.464,2.021 1.014,1.509 false

Attach the jet pump to the sub-tank.

HINT:

Make sure the 2 protrusions of the jet pump are properly installed into the sub-tank.



c.
A175038

Connect the fuel pump connector.