Do not disconnect the hoses indicated in the illustration.
| *A | for Single Tank Type | *B | foe Double Tank Type |
23221
1.INSTALL FUEL PUMP (for Double Tank Type)
Connect the fuel pump wire harness connector to the fuel pump.
Apply a light coat of gasoline to a new O-ring. Then install the spacer and O-ring to the fuel pump.
| *1 | O-Ring |
| *2 | Spacer |
Attach the 2 claws to the claw holes to install the fuel pump.
2.INSTALL NO. 1 FUEL SUB-TANK (for Single Tank Type)
Attach the 3 claws to the claw holes to install the No. 1 fuel sub-tank.
77131C
3.INSTALL NO. 1 FUEL SUB-TANK (for Double Tank Type)
Attach the 3 claws to the claw holes to install the No. 1 fuel sub-tank.
Attach the jet pump to the No. 1 fuel sub-tank.
| *1 | Jet Pump |
Make sure the 2 protrusions of the jet pump are properly installed into the No. 1 fuel sub-tank.
Connect the fuel pump connector.
83320
4.INSTALL FUEL SENDER GAUGE ASSEMBLY