Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL SENDER GAUGE ASSEMBLY › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052783 1VD-FTV FUEL _0255118 FUEL SENDER GAUGE ASSEMBLY G

1VD-FTV FUEL  FUEL SENDER GAUGE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

E154367E01
0.257,0.191 0.418,0.344 0.162,0.152 10 *a 0.974,2.185 1.136,2.337 0.162,0.152 10 *b 0.974,4.308 1.136,4.460 0.162,0.152 10 *c 1.216,2.281 1.46,2.281 false 1.186,4.412 1.43,4.412 false

Text in Illustration
*a Component without harness connected
(Fuel Sender Gauge)
*b F (Upper)
*c E (Lower)

a.

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Float level is F (upper) 13.5 to 16.5 Ω
Float level is E (lower) 405.5 to 414.5 Ω


If the result is not as specified, replace the fuel sender gauge assembly.