Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank) › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052783 1VD-FTV FUEL _0255119 FUEL SENDER GAUGE ASSEMBLY(for Fuel Sub Tank) G

1VD-FTV FUEL  FUEL SENDER GAUGE ASSEMBLY(for Fuel Sub Tank)  INSPECTION  


PROCEDURE

Hide 83320B 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

A174986E01
0.039,0.019 2.515,0.180 2.477,0.161 10 Component without harness connected: 0.039,0.218 1.368,0.395 1.330,0.177 10 (Fuel Sender Gauge) 2.012,1.491 2.117,1.643 0.105,0.151 10 1 1.48,1.491 1.585,1.643 0.105,0.151 10 3 1.744,1.491 1.849,1.643 0.105,0.151 10 2 1.466,3.185 0.81,3.185 false 1.367,4.122 0.842,4.122 false 0.68,4.036 0.803,4.187 0.123,0.151 10 E 0.666,3.103 0.789,3.254 0.123,0.151 10 F

a.

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Float level is F (upper) 12 to 18 Ω
Float level is E (lower) 405 to 415 Ω


If the result is not as specified, replace the fuel sender gauge assembly.