Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL SYSTEM(w/ DPF)
RM2660E _51 Engine / Hybrid System _052783 1VD-FTV FUEL _0255120 FUEL SYSTEM(w/ DPF) L

1VD-FTV FUEL  FUEL SYSTEM(w/ DPF)  PRECAUTION  


FUEL SYSTEM


a.

Observe these precautions when disconnecting the fuel tube connector (for quick type A).

i.
A157617E20
0.594,1.094 0.896,1.26 0.302,0.167 10 false Pull

Detach the lock claw by lifting up the cover as shown in the illustration.


ii.

Check for dirt or mud on the pipe and around the connector before disconnection. Clean if necessary.


iii.
A088336E62
0.802,0.25 1.177,0.427 0.375,0.177 10 false Pinch 1.74,1.75 2.094,1.958 0.354,0.208 10 true Pinch 0.313,1.729 0.563,2.094 0.25,0.365 10 true Pull

Pinch the connector and disconnect the connector and pipe.

If the connector and pipe are stuck together, pinch the connector, and push and pull the pipe to disconnect the pipe and pull it out.

NOTICE:

Do not use any tools in this procedure.



iv.

Check for dirt or mud on the seal surface of the disconnected pipe. Clean if necessary.


v.
A099427E31
1.448,0.906 1.625,0.198 false 1.625,0.198 1.792,0.198 false 1.823,0.083 2.729,0.281 0.906,0.198 10 false Plastic Bag

To protect the disconnected pipe and connector from damage and contamination, cover it with a plastic bag.



b.

Observe these precautions when disconnecting the fuel tube connector (for quick type B).

i.
A167866E01
1.366,1.665 1.913,1.814 0.547,0.149 10 Retainer 2.507,1.752 2.063,1.752 false

Check that there is no damage or foreign matter on the part of the pipe that contacts the connector.


ii.
U110359

Detach the 2 claws of the connector retainer. Push down on the connector and disconnect it from the pipe.

HINT:

If the connector and pipe are stuck, pinch the fuel pipe by hand, and push and pull the connector to disconnect it.


NOTICE:

Do not use any tools in this procedure.



iii.

Check for foreign matter on the seal surface of the disconnected pipe. Clean it if necessary.


iv.
A103972E02
0.163,0.197 0.881,0.393 0.717,0.196 10 Plastic Bag 1.07,0.332 1.206,0.332 1.206,0.332 1.616,0.678 false

To protect the disconnected pipe and connector from damage and foreign matter, cover it with a plastic bag.



c.
U163290E01
0.199,0.45 0.755,0.598 0.555,0.148 10 Retainer

Observe these precautions when disconnecting the fuel tube connector (for quick type C).

i.

Check for dirt or mud on the injector and around the connector before disconnection. Clean if necessary.


ii.
A203844

Detach the hook of the fuel tube connector retainer, open the retainer, and then disconnect the fuel tube connector from the injector.

HINT:

If the connector and injector are stuck, pinch the fuel tube connector by hand, and push and pull the connector to disconnect it


NOTICE:

Do not use any tools in this procedure.



iii.

Check for foreign matter on the seal surface of the disconnected injector. Clean if necessary.


iv.
A203845E01
2.312,0.088 3.050,0.248 0.738,0.160 10 Plastic Bag 2.28,0.173 2.109,0.173 2.109,0.173 1.838,0.804 false

To protect the disconnected connector from damage and foreign matter, cover it with a plastic bag.



d.
A130944E01
2.381,1.287 2.729,1.444 0.348,0.158 10 Push

Observe these precautions when connecting the fuel tube connector (for quick type A).

i.

Check that there is no damage or contamination in the connection part of the pipe.


ii.

Align the axis of the connector with the axis of the pipe. Push the pipe into the connector until the connector makes a "click" sound. If the connection is tight, apply a small amount of fresh spindle oil or gasoline on the tip of the pipe.


iii.
A130945E02
2.392,1.393 2.659,1.548 0.267,0.155 10 Pull

After having finished the connection, try to pull apart the pipe and connector to confirm that they are securely connected.


iv.
A157616E02
3.061,0.991 3.414,1.142 0.353,0.152 10 Push

Attach the lock claw to the connector by pushing down on the cover as shown in the illustration.


v.

Check that there is no fuel leakage.



e.

Observe these precautions when connecting the fuel tube connector (for quick type B).

i.
A125397E01
1.351,1.654 1.941,1.841 0.590,0.187 10 Retainer 2.07,1.755 2.229,1.755 2.229,1.755 2.453,1.561 false

Check for foreign matter on the pipe and around the connector before connecting it. Clean it if necessary.


ii.

Align the axis of the connector with the axis of the pipe. Push the pipe into the connector, and push up on the retainer.


iii.
A093435

After connecting the pipe and connector, try to pull them apart to confirm that they are securely connected.



f.

Observe these precautions when connecting the fuel tube connector (for quick type C).

i.

Check for foreign matter on the injector and around the connector before connecting them. Clean if necessary.


ii.
A203842E05
0.117,2.471 1.468,2.626 1.351,0.155 10 Fuel Tube Connector 1.634,4.039 2.131,4.194 0.497,0.155 10 O-Ring 2.466,3.768 3.050,3.937 0.584,0.169 10 Retainer 2.692,2.623 3.190,2.781 0.499,0.158 10 Injector 1.785,2.562 1.912,2.562 1.912,2.562 1.912,2.857 false 2.533,2.965 2.533,2.715 2.533,2.715 2.631,2.715 false 2.272,3.51 2.272,3.859 2.272,3.859 2.418,3.859 false 1.923,3.319 1.923,4.005 false

Turn the retainer in the direction indicated by the arrow until makes a "click" sound.


iii.
A205168

After connecting the injector and connector, try to pull them apart to confirm that they are securely connected.


iv.

Check that there is no fuel leakage.



g.

Observe the following precautions when handling a nylon tube:

NOTICE:
·

Do not twist the connection part of the nylon tube when connecting it.

·

Do not bend or twist the nylon tube.

·

Do not remove the EPDM protector on the outside of the nylon tube.

·

Do not bend the nylon tube as this may cause blockage.





CHECK FOR FUEL LEAK


a.

Check that there are no fuel leaks after performing maintenance anywhere on the fuel system (See page Engine / Hybrid System>1VD-FTV (FUEL)>FUEL SYSTEM(w/ DPF)>ON-VEHICLE INSPECTION).