Home › Engine / Hybrid System › 1GR-FE (EMISSION CONTROL) › PCV VALVE
RM2660E _51 Engine / Hybrid System _052784 1GR-FE EMISSION CONTROL _0255125 PCV VALVE G

1GR-FE EMISSION CONTROL  PCV VALVE  INSPECTION  


PROCEDURE

Hide 12204 1.INSPECT VENTILATION VALVE SUB-ASSEMBLY

a.

Install a clean hose to the ventilation valve.


b.

Check the ventilation valve operation.

i.
A105282E01
1.485,1.53 1.898,1.289 false 1.922,0.585 3.414,0.845 1.492,0.260 10 Cylinder Head Side 2.989,1.539 3.256,1.740 0.267,0.201 10 Air 0.91,1.539 1.985,1.764 1.075,0.225 10 Clean Hose

Blow air into the cylinder head side, and check that air passes through easily.

CAUTION:

Do not suck air through the valve.

Petroleum substances inside the valve are hazardous to your health.



ii.
A105281E01
1.099,1.332 1.477,0.92 false 0.867,0 2.425,0.211 1.559,0.211 10 Intake Manifold Side 0.312,0.297 0.654,0.501 0.342,0.205 10 Air 0.592,1.375 1.559,1.608 0.967,0.232 10 Clean Hose

Blow air into the intake manifold side, and check that air passes through with difficulty.

If the result is not as specified, replace the ventilation valve.



c.

Remove the clean hose from the ventilation valve.